Turntables & Cartridges

• Brand: Audio Technica
• Type: Turntable
• Model #: ATN3600LE

• Type: Turntable
• Display: Blue Back-lit LCD Display
• Specification: Output: 2 x 2W RMS Remote: 2 x "AAA" (UM-4) (Included) Speaker: 9" (H) x 5-3/4" (W) x 6" (D)
• Outputs: Stereo Headphone Jack RCA Line-out Jacks
• Model #: JTA-475

+ $10 off w/ promo code BTSF2287, limited offer

• Brand: Audio-Technica
• Part Number: AT-LP60X-BK
• Type: Turntable
• Color: Matte Black
• Model #: AT-LP60X-BK

• Type: Receivers
• Model #: VTA200BMAH

• Model #: AT6028

• Type: Turntable
• Outputs: RCA Line-out 3.5mm Headphone Jack
• Inputs: 3.5MM Aux Input
• Model #: TRX-28SP

• Brand: Audio-Technica
• Series: AT
• Part Number: AT-LP120XBT-USB-BK
• Type: MI - Turntables & Cartridges
• Model #: AT-LP120XBT-USBBK

• Part Number: AT-LP60XBT-BK
• Type: 2925
• Color: Black
• Accessory Type: Belt Drive Turntables
• Model #: AT-LP60XBT-BK

• Brand: Audio-Technica
• Part Number: AT-LP70X-BZ
• Type: Turntable
• Color: Black-Bronze
• Model #: AT-LP70X-BZ

• Type: Cleaning Kits
• Color: Black
• Model #: AT6013A

• Model #: ATN3600LC

• Model #: AT-VMN95ML

• Brand: Audio-Technica
• Color: Silver
• Feature: Precision-machined stainless-steel stabilizer holds records firmly in place for reduced resonance and improved sound quality Two recessed inner rings on the underside of the stabilizer accommodate records that bulge slightly near the spindle hole Easy to grip with fingers Approx. 450 g (15.9 oz) Fits spindles up to 21 mm long Works with a wide variety of turntables, including most Audio-Technica step-up and premium models* Made in Japan *Check with your turntable's manufacturer to confirm that it can support the weight of the AT628a. The AT628a should not be used with the following Audio-Technica turntables: AT-LP3XBT, AT-LPW30, and all entry-level models, including the Sound Burger and turntables in the AT-LP60, AT-LP60X and AT-LP70X Series. Please reach out to our Audio Solutions T...
• Model #: AT628A

• Type: Turntable
• Color: Green
• Model #: AT-VM95E

• Model #: ATN95EX

• Brand: Audio Technica
• Series: Sound Burger
• Type: Turntables
• Spec: Belt Drive, VM Cartridge, USB-C Input Jack, Bluetooth, RCA Cable Included
• Model #: AT-SB727-YL

• Brand: Audio-Technica
• Part Number: AT-LP60XBT-WW
• Type: ATLP60XBTWW
• Color: White
• Model #: AT-LP60XBT-WW

• Accessory Type: Stylus Cleaner
• Model #: AT607A

• Brand: Audio-Technica
• Part Number: AT-LP70XBT-BS
• Type: Turntable
• Color: Black/Silver
• Model #: AT-LP70XBT-BS

• Model #: AT-VMN95EBK

• Color: Black
• Model #: AT-VM95EN

• Model #: AT-XP3/H

• Brand: Audio-Technica
• Part Number: AT-LP70XBT-BZ
• Type: Turntable
• Color: Black/Bronze
• Model #: AT-LP70XBT-BZ

• Brand: AudioTechnica
• Part Number: AT-LP60X-GM
• Type: MI - Turntables & Cartridges
• Color: Black
• Model #: AT-LP60X-GM

• Type: Others
• Color: Black
• Accessory Type: Other
• Weight: 25.9800
• Model #: AT-LP140XP-BK

• Brand: Audio-Technica
• Color: Orange/Black
• Accessory Type: Cartridges & Needles
• Specification: Frequency Response: 20 to 25,000 Hz Channel Separation: 25 dB (1 kHz) Vertical Tracking Angle: 20° Tracking Force: 1.8 to 2.2 g (2.0 g standard) Stylus Construction: Nude elliptical Recommended Load Impedance: 47 k ohms Coil Impedance: 3.2 k ohms (1 kHz) DC Resistance: 750 ohms Coil Inductance: 480 mH (1 kHz) Output Voltage: 3.2 mV (1 kHz, 5 cm/sec.) Output Balance: 1.5 dB (1 kHz) Cantilever: Aluminum pipe Static Compliance: 23 x 10-6 cm/dyne Dynamic Compliance: 7 x 10-6 cm/dyne (100 Hz)
• Model #: AT615A

• Model #: AT-VM745XML

• Model #: AT-HS1

• Brand: Audio-Technica
• Color: Black
• Accessory Type: Cartridge Alignment Protractor
• Feature: Protractor uses the common Baerwald alignment method to set a phono cartridge's offset angle and null points Proper alignment is critical for peak cartridge performance, providing optimal tracking and minimizing distortion Suitable for tonearms with an effective length between 222 mm (8.7") and 250 mm (9.8")
• Model #: AT-CAP1

• Brand: Audio-Technica
• Color: Black
• Feature: Universal 1/2"-mount headshell for 4-pin turntable cartridges Ultra-lightweight aluminum die-cast body keeps vibration to the bare minimum Finger lift enables precise stylus placement Equipped with color-coded lead wires Includes mounting screws
• Model #: AT-HS6BK

• Brand: Audio-Technica
• Color: Black/Gold
• Accessory Type: Cartridges & Needles
• Specification: Frequency Response: 20 to 27,000 Hz Channel Separation: 26 dB (1 kHz) Vertical Tracking Angle: 20° Tracking Force: 1.8 to 2.2 g (2.0 g standard) Stylus Construction: Nude Shibata Recommended Load Impedance: 47 k ohms Coil Impedance: 3.2 k ohms (1 kHz) DC Resistance: 750 ohms Coil Inductance: 480 mH (1 kHz) Output Voltage: 3.7 mV (1 kHz, 5 cm/sec.) Output Balance: 1.0 dB (1 kHz) Cantilever: 0.28 mm (0.01") diameter solid boron Static Compliance: 20 x 10-6 cm/dyne Dynamic Compliance: 7 x 10-6 cm/dyne (100 Hz)
• Model #: AT-VM750XSH

• Brand: Audio-Technica
• Accessory Type: Cartridges & Needles
• Feature: The AT-VMx series brings new warmth and realism to Audio-Technica's premium dual moving magnet (MM) cartridge line, delivering an expansive soundstage that's alive with musical detail. Aligning with our founder's belief that high-quality audio should be accessible to all, the AT-VMx Series is unmatched in delivering a truly affordable high-fidelity audio experience.
• Model #: AT-VMN10XCB

• Brand: Audio-Technica
• Color: Green
• Accessory Type: Cartridges & Needles
• Specification: 0.3 x 0.7 mil elliptical replacement stylus for these cartridges:
• Model #: AT-VMN95E

• Brand: Audio-Technica
• Color: Orange
• Accessory Type: Cartridges & Needles
• Specification: Tracking Force: 1.8 to 2.2 g (2.0 g standard) Stylus Construction: Nude elliptical Cartridge (sold separately): AT-VM530xEN
• Model #: AT-VMN30XEN

• Brand: Audio-Technica
• Color: Red
• Accessory Type: Cartridges & Needles
• Specification: Tracking Force: 1.8 to 2.2 g (2.0 g standard) Stylus Construction: Nude Microlinear Cartridge (sold separately): AT-VM740xML
• Model #: AT-VMN40XML

• Brand: Audio-Technica
• Color: Black / Blue
• Accessory Type: Cartridges & Needles
• Specification: Frequency Response: 20 to 20,000 Hz Channel Separation: 24 dB (1 kHz) Vertical Tracking Angle: 20° Tracking Force: 1.8 to 2.2 g (2.0 g standard) Stylus Construction: Elliptical bonded Recommended Load Impedance: 47 k ohms Coil Impedance: 3.2 k ohms (1 kHz) DC Resistance: 750 ohms Coil Inductance: 480 mH (1 kHz) Output Voltage: 5.0 mV (1 kHz, 5 cm/sec.) Output Balance: 1.5 dB (1 kHz) Cantilever: Aluminum pipe Static Compliance: 23 x 10-6 cm/dyne Dynamic Compliance: 7 x 10-6 cm/dyne (100 Hz)
• Model #: AT-VM520XEB

• Brand: Audio-Technica
• Color: Orange/Black
• Accessory Type: Cartridges & Needles
• Specification: Frequency Response: 20 to 25,000 Hz Channel Separation: 25 dB (1 kHz) Vertical Tracking Angle: 20° Tracking Force: 1.8 to 2.2 g (2.0 g standard) Stylus Construction: Nude elliptical Recommended Load Impedance: 47 k ohms Coil Impedance: 3.2 k ohms (1 kHz) DC Resistance: 750 ohms Coil Inductance: 480 mH (1 kHz) Output Voltage: 3.2 mV (1 kHz, 5 cm/sec.) Output Balance: 1.5 dB (1 kHz) Cantilever: Aluminum pipe Static Compliance: 23 x 10-6 cm/dyne Dynamic Compliance: 7 x 10-6 cm/dyne (100 Hz)
• Model #: AT-VM530XEN

• Brand: Audio-Technica
• Accessory Type: Cartridges & Needles
• Specification: Frequency Response: 20 to 20,000 Hz Vertical Tracking Angle: 20° Tracking Force: 4.5 to 5.5 g (5.0 g standard) Stylus Construction: Conical bonded (3.0 mil) Recommended Load Impedance: 47 k ohms Coil Impedance: 1.6 k ohms (1 kHz) DC Resistance: 375 ohms Coil Inductance: 240 mH (1 kHz) Output Voltage: 4.7 mV (1 kHz, 5 cm/sec.) Horizontal/Vertical Output Ratio: 20 dB (1 kHz) Cantilever: Aluminum pipe Static Compliance: 23 x 10-6 cm/dyne
• Feature: AT-VMx dual moving magnet cartridge with 3.0 mil conical bonded stylus 3.0 mil conical bonded stylus designed for playing 78 RPM records Paratoroidal coils improve generating efficiency for enhanced transient response PCUHD (Pure Copper Ultra High Drawability) coils - and fewer coil turns - deliver highly res...
• Model #: AT-VM670XSP

• Brand: Audio-Technica
• Color: Blue/Black
• Accessory Type: Cartridges & Needles
• Specification: Frequency Response: 20 to 20,000 Hz Channel Separation: 24 dB (1 kHz) Vertical Tracking Angle: 20° Vertical Tracking Force: 1.8 to 2.2 g (2.0 g standard) Recommended Load Impedance: 47 k ohms Coil Impedance: 3.2 k ohms (1 kHz) DC Resistance: 750 ohms Coil Inductance: 480 mH (1 kHz) Output Voltage: 5.0 mV (1 kHz, 5 cm/sec.) Output Balance: 1.5 dB (1 kHz) Cantilever: Aluminum pipe Static Compliance: 23 x 10-6 cm/dyne Dynamic Compliance: 7 x 10-6 cm/dyne (100 Hz)
• Model #: AT-VM510XCB

• Brand: Audio-Technica
• Accessory Type: Cartridges & Needles
• Specification: Frequency Response: 20 to 20,000 Hz Channel Separation: 24 dB (1 kHz) Vertical Tracking Angle: 20° Tracking Force: 1.8 to 2.2 g (2.0 g standard) Stylus Construction: Elliptical bonded Recommended Load Impedance: 47 k ohms Coil Impedance: 3.2 k ohms (1 kHz) DC Resistance: 750 ohms Coil Inductance: 480 mH (1 kHz) Output Voltage: 5.0 mV (1 kHz, 5 cm/sec.) Output Balance: 1.5 dB (1 kHz) Cantilever: Aluminum pipe Static Compliance: 23 x 10-6 cm/dyne Dynamic Compliance: 7 x 10-6 cm/dyne (100 Hz)
• Feature: AT-VM520xEB Dual Moving Magnet Cartridge - AT-VMx dual moving magnet cartridge with 0.3 x 0.7 mil elliptical bonded stylus - 0.3 x 0.7 mil elliptical bonded stylus tracks the record groove with accuracy for outstanding audio reproduction - Paratoroidal coils...
• Model #: AT-VM520XEB/H

• Brand: Audio-Technica
• Color: Blue
• Accessory Type: Cartridges & Needles
• Specification: Frequency Response: 20 to 20,000 Hz Vertical Tracking Angle: 20° Tracking Force: 1.8 to 2.2 g (2.0 g standard) Stylus Construction: Conical bonded Recommended Load Impedance: 47 k ohms Coil Impedance: 1.6 k ohms (1 kHz) DC Resistance: 375 ohms Coil Inductance: 240 mH (1 kHz) Output Voltage: 5.0 mV (1 kHz, 5 cm/sec.) Horizontal/Vertical Output Ratio: 20 dB (1 kHz) Cantilever: Aluminum pipe Static Compliance: 23 x 10-6 cm/dyne Dynamic Compliance: 7 x 10-6 cm/dyne (100 Hz)
• Model #: AT-VM610XMONO

• Model #: 31735

• Brand: Audio-Technica
• Part Number: AT-SMC1
• Color: Wood
• Feature: Cork slipmat reduces vibrations and unwanted resonance, ensuring clearer audio playback Provides a stable platform for records, minimizing slippage during playback At 1.6 mm, the slipmat offers a good balance between flexibility and support With a diameter of 295 mm (11.6") and thickness of 1.6 mm, this slipmat will fit most standard turntables Doesn't attract dust or shed particles like some other cork or felt mats, keeping records and turntables cleaner over time
• Model #: AT-SMC1

• Model #: AT-LPA2

• Type: MI - Turntables & Cartridges
• Color: Brown
• Color: Brown
• Model #: VTA72BAM

• Name: BLUETOOTH PORTABLE TURNTABLE
• Part Number: AT-SB727-BK
• Color: Black
• Speaker Type: Bluetooth Speaker
• Model #: AT-SB727-BK

• Brand: Audio Technica
• Part Number: AT-LP3XBT-BK
• Type: Turntable
• Color: Black
• Model #: AT-LP3xBT-BK

• Brand: Audio-Technica
• Part Number: AT-LP3XBT-WH
• Type: ATLP3XBTWH
• Color: White
• Model #: AT-LP3XBT-WH

• Brand: Audio-Technica
• Part Number: AT-LP70X-BG
• Type: Turntable
• Color: Black/Gray
• Model #: AT-LP70X-BG

• Part Number: ATN95E
• Type: Turntable
• Color: Green
• Weight: lbs
• Model #: ATN95E

• Brand: AudioTechnica
• Part Number: ATLP60XBTRD
• Type: MI - Turntables & Cartridges
• Color: Red
• Model #: AT-LP60XBT-RD

• Model #: ITNP-S1

• Model #: V50200BK

• Model #: ATN91R

• Brand: Audio Technica
• Type: Turntable
• Model #: AT-LP7X

• Type: Turntable
• Accessory Type: Cartridges & Needles
• Specification: Vertical Tracking Angle: 23° Vertical Tracking Force: 1.8-2.2 g (2.0g standard) Stylus Construction: Bonded round shank Recommended Load Impedance: 47,000 ohms Coil Impedance: 3.3 k ohms (1 kHz) DC Resistance: 485 ohms Coil Inductance: 550 mH (1 kHz) Output Voltage: 4.0 mV (1 kHz, 5 cm/sec.) Output Channel Balance: 2.5 dB (1 kHz) Stylus Shape: 0.6 mil conical Cantilever: Aluminum
• Channel: 18 (dB at 1 kHz)
• Model #: AT-VM95C

• Part Number: ATN91
• Color: Black
• Weight: lbs
• Model #: ATN91

• Model #: VS-N-001

• Accessory Type: Other
• Weight: 0.04
• Model #: ATN-XP5

• Model #: AT-HS6SV

• Type: MI - Turntables & Cartridges
• Color: Black
• Model #: VSC750BLK

• Model #: AT6003R

• Model #: AT-XP7/H

• Accessory Type: Other
• Specification: Channel Separation: 20 (dB at 1 kHz) Vertical Tracking Force: 2.0-4.0 g (3.0 g standard) Stylus Construction: Bonded round shank Recommended Load Impedance: 47,000 ohms Output: 5.5 mV (1 kHz, 5 cm/sec.) Channel Balance: 2.0 dB (1 kHz) Stylus Shape: 0.3 x 0.7 mil elliptical Cantilever: Carbon fiber-reinforced ABS Mount: Half-inch Replacement Stylus: ATN-XP5 Coil impedance: 6.7 k ohms (1 kHz) DC resistance: 990 ohms Recommended load capacitance: 100 to 200 pF Coil inductance: 1.0 H (1 kHz) Vertical tracking angle: 20 degree
• Frequency Response: 20-18,000 Hz
• Dimension: 0.68" x 0.67" x 1.20"
• Model #: ATXP5

• Type: Turntable
• Model #: VMN10CB

$200 promotional gift card w/ purchase, limited offer

• Brand: Yamaha
• Series: MusicCast VINYL 500
• Part Number: TT-N503BL
• Type: Turntable
• Model #: TT-N503BL

$200 promotional gift card w/ purchase, limited offer

• Series: MusicCast VINYL 500
• Type: Turntable
• Color: White
• Inputs: Network Section File Format: MP3 / WMA / MPEG-4 AAC: up to 48 kHz / 16-bit, ALAC: up to 96 kHz / 24-bit, FLAC / WAV / AIFF: up to 192 kHz / 24-bit, DSD: up to 11.2 MHz Ethernet: Yes Wi-Fi: Yes (2.4 / 5 GHz) AirPlay: Yes Bluetooth Section Version/Profile: Ver. 4.2 / A2DP, AVRCP Audio Codec: SBC, AAC Maximum Communication Range: 10 m / 32.8 ft. 10 in. (without interferene) Turntable Drive Method: Belt drive Motor: DC motor Wow And Flutter: 0.2% Platter: Aluminium die-cast (Diameter 30 cm) Output Level: 450 mV (-7 dBV, with RIAA EQ, 1 kHz, 3.54 cm / sec), 2.5 mV ± 3 dBV (without RIAA EQ, 1 kHz, 3.54 cm / sec) Signal To Noise Ratio: 67 dB or higher (A-weighted, 20 kHz, LPF) Tonearm Tonearm: Static balance straight tonearm Effective Arm Length: 223.5 mm Overhang: 19 mm Stylus Pr...
• Model #: TT-N503WH

• Model #: AT-LP8X

OUT OF STOCK

• Brand: Trexonic
• Part Number: TRX-811BS-18
• Type: Turntable
• Color: Black
• Model #: TRX-811BS-18

OUT OF STOCK

• Color: Black
• Model #: AT85EP

OUT OF STOCK

• Brand: Trexonic
• Series: 3-Speed Vinyl Turntable
• Part Number: TRX-811BS
• Type: Turntable
• Model #: TRX-811BS

OUT OF STOCK

• Type: MI - Turntables & Cartridges
• Color: Brown
• Model #: AT-LP60x-BW

OUT OF STOCK

• Model #: AT33XEN

OUT OF STOCK

• Model #: AT-XP5/H

OUT OF STOCK

• Brand: Audio-Technica
• Part Number: AT-VMN95C
• Type: AT-VMN95C
• Color: Blue
• Model #: AT-VMN95C

OUT OF STOCK

• Accessory Type: Other
• Weight: 0.04
• Model #: ATN-XP7

OUT OF STOCK

• Part Number: VM510CB
• Type: Turntable
• Accessory Type: Cartridges & Needles
• Specification: Vertical Tracking Angle: 23 degrees Coil Impedance: 2,700 ohms (1 kHz) DC Resistance: 800 ohms Load Capacitance: 100-200 pF Coil Inductance: 460 mH (1 kHz) Static Compliance: 35 x 10-6 cm/dyne Dynamic Compliance: 8 x 10-6 cm/dyne (100 Hz) Vertical Tracking Force: 1.8-2.2 g (2.0 g standard) Stylus Construction: Bonded round shank Recommended Load Impedance: 47,000 ohms Stylus Shape: 0.6 mil conical
• Model #: VM510CB

OUT OF STOCK

• Accessory Type: Other
• Specification: Channel Separation: 22 (dB at 1 kHz) Vertical Tracking Force: 2.0-4.0 g (3.0 g standard) Stylus Construction: Bonded round shank Recommended Load Impedance: 47,000 ohms Output: 6.0 mV (1 kHz, 5 cm/sec.) Channel Balance: 2.0 dB (1 kHz) Stylus Shape: 0.3 x 0.7 mil elliptical Cantilever: Aluminum tapered pipe Mount: Half-inch Replacement Stylus: ATN-XP7 Coil impedance: 6.7 k ohms (1 kHz) DC resistance: 990 ohms Recommended load capacitance: 100 to 200 pF Coil inductance: 1.0 H (1 kHz) Vertical tracking angle: 20 degree
• Frequency Response: 20-20,000 Hz
• Dimension: 0.68" x 0.67" x 1.20"
• Model #: ATXP7