Your Browsing History
- Free 30-day Returns
$293.99
Meet Your Seller
PreSonus Eris Pro 6 2-Way Biamped, Active, 6.5-inch Coaxial Studio Monitor
- Professional studio monitors for both stereo and surround (e.g., Dolby Atmos) applications. Single-point-source coaxial design for better phase alignment, superior imaging, and symmetrical dispersion. Superior high-frequency reproduction: 1.25-inch (31.75 mm), ultra-low-mass, silk-dome, high-frequency transducer for crystal-clear, natural high end. 6.5-inch, woven-composite, low-frequency driver and front-firing acoustic port produce a powerful, accurate, and smooth bass response with extended low end. Loud and clear: 140W, Class AB biamplification delivers up to 106 dB SPL (Peak, @ 1 meter) without sacrificing tonal balance or audio clarity
+
+
Overview
Specs
Reviews
Any questions? Our AI beta will help you find out quickly.
Try me now
PreSonus Eris Pro 6 Powered 6.5" 140W High-Definition Coaxial Studio Monitor (Single)
Key Features
6.5" Woofer and 1.25" Silk-Dome Tweeter
35 Hz to 20 kHz Frequency Response
103 dB SPL
Single Point-Source Coaxial Design
Wide Sweet Spot, Precise Phase Alignment
Control Level, HPF, MF Trim, and HF Trim
Acoustic Space Filter
XLR, 1/4" TRS, and RCA Connections
140W Class-AB Bi-Amplification
Wall and Ceiling Mountable
Audio engineers, producers, and musicians looking for a professional studio monitor with a wide stereo image and precision phase alignment will be impressed with the single PreSonus Eris Pro 6, an active 2-way studio monitor which employs a single point-source coaxial design for clear and accurate sound reproduction. This design provides superior phase alignment between components and delivers a wide sweet spot, precise stereo imaging, and symmetrical dispersion patterns. The Eris Pro 6 has unique advantages for Dolby Atmos immersive rooms as well as stereo mix environments.
Two Class-AB amplifiers deliver 75W to the 6.5" woven composite woofer and 65W to the 1.25" silk dome tweeter, which offers a snappy, accurate transient response. The monitor offers a frequency response from 20 kHz down to 35 Hz for a full-range sound without a subwoofer and plenty of volume (103 dB SPL). The rear panel provides acoustic tuning controls, including a three-position Acoustic Space switch that helps compensate for the boundary bass boost that can occur when a monitor is placed in a corner or near a wall. High and Mid controls help to further mitigate room anomalies, while a low cutoff filter makes it easy to integrate a subwoofer into your monitor setup.
Lastly, provisions for wall and ceiling mounts make it easy to integrate Eris Pro 6 monitors into any stereo or multi-channel system.
Key Features at a Glance
6.5" woven composite low-frequency driver
1.25" ultralow mass, silk-dome, high-frequency driver
100 x 60° EBM waveguide provides a sweet spot
140W, Class AB dual amplification
35 Hz to 20 kHz frequency response
103 dB Peak SPL (at 1 m)
Acoustic Tuning Controls:
Acoustic Space (Flat, -2 dB, -4 dB)
High Frequency (±6 dB, center 10 kHz, continuously variable)
Mid Frequency (±6 dB, center 1 kHz, continuously variable)
Low Cut (Flat, 80, 100 Hz at -12 dB/octave)
Inputs:
XLR and 1/4-inch TRS balanced rear-panel inputs
RCA unbalanced rear-panel inputs
Protection:
RF interference
Output-current limiting
Over-temperature
Turn-on/off transient
Subsonic filter
Power Saver mode (engages after 40 minutes)
Wall and ceiling mountable
Key Features
6.5" Woofer and 1.25" Silk-Dome Tweeter
35 Hz to 20 kHz Frequency Response
103 dB SPL
Single Point-Source Coaxial Design
Wide Sweet Spot, Precise Phase Alignment
Control Level, HPF, MF Trim, and HF Trim
Acoustic Space Filter
XLR, 1/4" TRS, and RCA Connections
140W Class-AB Bi-Amplification
Wall and Ceiling Mountable
Audio engineers, producers, and musicians looking for a professional studio monitor with a wide stereo image and precision phase alignment will be impressed with the single PreSonus Eris Pro 6, an active 2-way studio monitor which employs a single point-source coaxial design for clear and accurate sound reproduction. This design provides superior phase alignment between components and delivers a wide sweet spot, precise stereo imaging, and symmetrical dispersion patterns. The Eris Pro 6 has unique advantages for Dolby Atmos immersive rooms as well as stereo mix environments.
Two Class-AB amplifiers deliver 75W to the 6.5" woven composite woofer and 65W to the 1.25" silk dome tweeter, which offers a snappy, accurate transient response. The monitor offers a frequency response from 20 kHz down to 35 Hz for a full-range sound without a subwoofer and plenty of volume (103 dB SPL). The rear panel provides acoustic tuning controls, including a three-position Acoustic Space switch that helps compensate for the boundary bass boost that can occur when a monitor is placed in a corner or near a wall. High and Mid controls help to further mitigate room anomalies, while a low cutoff filter makes it easy to integrate a subwoofer into your monitor setup.
Lastly, provisions for wall and ceiling mounts make it easy to integrate Eris Pro 6 monitors into any stereo or multi-channel system.
Key Features at a Glance
6.5" woven composite low-frequency driver
1.25" ultralow mass, silk-dome, high-frequency driver
100 x 60° EBM waveguide provides a sweet spot
140W, Class AB dual amplification
35 Hz to 20 kHz frequency response
103 dB Peak SPL (at 1 m)
Acoustic Tuning Controls:
Acoustic Space (Flat, -2 dB, -4 dB)
High Frequency (±6 dB, center 10 kHz, continuously variable)
Mid Frequency (±6 dB, center 1 kHz, continuously variable)
Low Cut (Flat, 80, 100 Hz at -12 dB/octave)
Inputs:
XLR and 1/4-inch TRS balanced rear-panel inputs
RCA unbalanced rear-panel inputs
Protection:
RF interference
Output-current limiting
Over-temperature
Turn-on/off transient
Subsonic filter
Power Saver mode (engages after 40 minutes)
Wall and ceiling mountable
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: non-replaceable
- This item is covered by Adorama Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...