Specification: LED Type: Digital-RGB LED strip hard board (+5V, data, empty, Ground)
LED strip length: 65.9 mm
Number of LEDs: 2x 5pcs
Input Voltage: +5V
Current (Single strip) Max: 0.15A
Current (Dual Strip) Max: 0.3A
Wattage (Single strip) Max: 0.75W
Wattage (Dual Strip) Max: 1.5W
Copper Base Dimension (WxDxH): 60.2 x 51 x 3.7mm (2.37 x 2 x 0.15in)
Copper Thickness: 3.7 mm
Fin Construction: 0.08 mm fin gap / 0.08mm thickness
Materials: Acrylic / POM / Copper
Aluminum Cover
Fitting: Nickel Plated Brass
Fitting Insert: ABS
Supported Tube Size Hard Tube: OD 16mm
Soft Tube: OD 16mm; ID 10mm
Tube Compatibility Hard Tube: PETG, Acrylic Tube
Soft Tube: PVC Tube
Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board.
These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases.
Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating.
These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips.
These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc.
Installation Instructions:
-Make sure the chip modules are free from dirt and gre...
Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board.
Just peel and stick.
Reduce the risk of hardware failure due to overheating.
Installation Instructions:
Make sure the chip modules are free from dirt and grease.
Peel the protective liner off on the base of the heatsink.
Apply the heatsinks to the corresponding chip modules and apply firm pressure.
Package Includes:
1x 14mmx14mmx7.5mm Aluminum Heatsink for Raspberry pi 2B CPU chipset
1x 8.8mmx8.8mmx5mm Aluminum Heatsink for Raspberry pi 2B LAN chipset
Dimensions: 1x 14mmx14mmx7.5mm CPU chipset
1x 8.8mmx8.8mmx5mm LAN chipset
Features: Product Description Aluminum IC heatsink for PC Chipset power transistor, FET, IC, power amplifier, Voltage Regulator,Computer VGA Northbridge Southbridge etc.
Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here.
Use Screw to install the heatsink.
Specification
Product Name: Heatsink
Material: Aluminium
Color: Anodized Black
Overall Size: 35mm x 35mm x 10mm
Weight: 35g
Package Content: 2pcs x Heatsink
Features: Anodized Black Aluminum heatsink for Computer General CPU, GPU, Graphics Card, Vidoe Card,also can be used for cooling of , northbridge ,Southbridge ,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,etc.
The fins increase the area of the board and thus provide for greater heat transfer.
Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here.
Size is 25mm x 25mm x 10mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component.
Specification
Product Name: Heatsink
Material: Aluminium
Color: Anodized Black
Overall Size: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H)
Weight: 30g
Package Content: 5pcs x Heatsink