Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Tested to fit the Raspberry Pi CPU / SoC; Reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and grease. -Peel the protective liner off on the base of the heatsink. -Apply the heatsi...
Features: Aluminum Heat-Sink, For Package TO-220 / L7805 /LM337 Triode Transistors Cooler IC Chipset
Quantity: a lot of 20 Pieces
M3 Screw Hole.
Size: 19x 15x 10mm/ 0.8" x 0.6" x 0.4" (L*W*H)
Thickness" 0.8mm
Color : Anodized Black
Weight: 2g/ piece
Please check the specification table and make sure that the size of the heatsink fits that of your component
Features: Aluminum Heat-Sink, For Package TO-220 / TO-3P / TO-247 Rectifier, Transistor or Regulator IC.
Quantity: a lot of 10 Pieces.
M3 Screw Hole.
Size: 25 x 15x 10mm / 0.98" x 0.6" x 0.4"(L*W*H)
Color : Silver Tone
Weight: 4g/ piece
Please check the specification table and make sure that the size of the heatsink fits that of your component