DIY Cooling

• Model #: 1024628

• Type: Fittings
• Model #: BP-BSWP-C46

• Type: Fittings
• Model #: TYKN-K1410 V4 (SS)

Limited time offer, ends 07/31

• Model #: 11-001-066

Limited time offer, ends 07/31

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Aluminum Heat-Sink, For Package TO-220 / TO-3P / TO-247 Rectifier, Transistor or Regulator IC. Quantity: a lot of 10 Pieces. M3 Screw Hole. Size: 25 x 15x 10mm / 0.98" x 0.6" x 0.4"(L*W*H) Color : Silver Tone Weight: 4g/ piece Please check the specification table and make sure that the size of the heatsink fits that of your component
• Dimensions: 25 x 15x 10mm
• Model #: 11-001-065

• Type: Fittings
• Model #: TXYZ-A01

• Type: Fittings
• Model #: TNYZ-G40 (SS)

• Type: Fittings
• Model #: TWT90S-V2

Limited time offer, ends 07/31

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: 10 pcs of 8.8x8.8x5mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface. The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface Excellent adhesive performance with good wetting and flow onto many substrate surfaces....
• Model #: 11-001-393

• Model #: BPTA-PFANMFH

(1)

• Type: Reservoir
• Model #: BP-WTZMU200P-CLBK

• Type: Fittings
• Model #: BP-TBWP-C95

• Model #: 4250197176347

• Model #: 24685

• Type: Tubing
• Block Compatibility: False
• Pump Bearing: 0
• Pump Capacity: S13 Alphacool Schlauch AlphaTube HF 13/10 (3/8"ID) - UV Rot 1m (3,3ft) Retailbox
• Model #: 18532

• Model #: 649823632755

• Model #: 649823635633

• Type: Fittings
• Model #: BP-DWETAIR

Limited time offer, ends 07/31

• Model #: 11-001-362-6CM

• Type: Fittings
• Model #: BP-TBWP-CT

• Model #: BP-TBDWP-DC06

• Type: Fittings
• Color: Black
• Model #: TLQFS-V1

Limited time offer, ends 07/31

• Model #: 11-001-235

Limited time offer, ends 07/31

• Model #: 11-001-014

• Model #: 1022287

• Type: Fittings
• Package Contents: 1x Alphacool Eiszapfen 16mm off set fitting rotatable G1/4 OT to G1/4 IT-Chrome
• Model #: 4250197176026

• Model #: 14896

• Type: Fittings
• Package Contents: 1x Alphacool Eiszapfen 20mm L-Connector G1/4" OT to G1/4" IT is a 90-¦ Elbow Chrome
• Model #: 4250197175951

• Model #: BP-TBRG

Limited time offer, ends 07/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Anodized Black Aluminum heatsink for Computer General northbridge ,Southbridge Cooling ,also can be used for cooling graphics card, vidoe card,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 28mm x 28mm x 20mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 28 x 28 x 20mm/ 1.1" x 1.1" x 0.8" (L*W*H) Weight: 30g Package Content: 2pcs x Heatsink
• Dimensions: 28 x 28 x 20mm
• Model #: 11-001-327

• Model #: BP-TBC4-BK

• Model #: 14933

Limited time offer, ends 07/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Aluminum Heat-Sink, For Package TO-220 / L7805 /LM337 Triode Transistors Cooler IC Chipset Quantity: a lot of 20 Pieces M3 Screw Hole. Size: 19x 15x 10mm/ 0.8" x 0.6" x 0.4" (L*W*H) Thickness" 0.8mm Color : Anodized Black Weight: 2g/ piece Please check the specification table and make sure that the size of the heatsink fits that of your component
• Dimensions: 19x 15x 10mm
• Model #: 11-001-067

• Model #: 14812

• Type: Fittings
• Model #: TWT45-B01

• Type: Fittings
• Package Contents: 1x Alphacool HF quick release connector with bulkhead
• Model #: 17225