DIY Cooling

• Model #: BP-HTSB12CL-1M-1

• Type: Tubing
• Block Compatibility: False
• Pump Bearing: 3.53
• Pump Capacity: S16 Alphacool HardTube 16/11mm Borosilikatglas 60cm
• Model #: 18496

• Model #: BP-TBC4-BK

• Type: Tubing
• Block Compatibility: False
• Pump Bearing: 0
• Pump Capacity: S13 Alphacool Schlauch AlphaTube HF 13/10 (3/8"ID) - Klar 1m (3,3ft) Retailbox
• Model #: 18528

• Type: Fittings
• Model #: BP-HFI

Limited time offer, ends 07/31

• Model #: 11-001-195

• Type: Fittings
• Model #: BP-WTP-C95

• Type: Fittings
• Model #: BP-PRE-06

• Type: Radiator
• Radiator Size: 147 x 41 x 40mm
• Radiator Material: Copper
• Fan Dim.: 40mm
• Model #: 14210

Limited time offer, ends 07/31

• Model #: 11-001-129

• Model #: BP-MBETW

• Model #: 14809

• Model #: BPM-ENCLP-EVO

• Type: Fittings
• Model #: BP-BSETAIR

• Model #: BP-CBDWP-DC06

• Model #: 14892

• Type: Fittings
• Specification: Thermaltake Pacific G1/4 PETG Tube 16mm OD Compression - Rose Gold The Pacific C-Pro Series is a revolution in fitment design. It simplifies the process of setting up a liquid-cooling loop and provides a seal that outperforms traditional compression fittings. By using 4 preinstalled O-rings and an overhauled design, the C-Pro Series is the new standard in fitment technology and it is exclusive to Thermaltake.
• Model #: CL-W266-CU00RG-A

• Model #: BP-DWWP-C01

• Type: Radiator
• Block Compatibility: False
• Pump Bearing: 29.2
• Pump Capacity: RAD Alphacool NexXxoS ST30 Full Copper X-Flow 420mm Radiator
• Model #: 14243

• Type: Fittings
• Block Compatibility: False
• Pump Bearing: 11.65
• Pump Capacity: ANS Alphacool Eiszapfen 19/13mm Anschraubtülle G1/4 - Chrome Sixpack
• Model #: 1011170

• Model #: 14923

• Model #: BPN-RL2422ML

• Model #: 4250197130721

• Model #: BPTA-TOO11DXLA-PHCL-V2

Limited time offer, ends 07/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. Just peel and stick. Reduce the risk of hardware failure due to overheating. Installation Instructions: Make sure the chip modules are free from dirt and grease. Peel the protective liner off on the base of the heatsink. Apply the heatsinks to the corresponding chip modules and apply firm pressure. Package Includes: 1x 14mmx14mmx7.5mm Aluminum Heatsink for Raspberry pi 2B CPU chipset 1x 8.8mmx8.8mmx5mm Aluminum Heatsink for Raspberry pi 2B LAN chipset
• Dimensions: 1x 14mmx14mmx7.5mm CPU chipset 1x 8.8mmx8.8mmx5mm LAN chipset
• Model #: 11-001-200

Limited time offer, ends 07/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Anodized Black Aluminum heatsink for Computer General CPU, GPU, Graphics Card, Vidoe Card,also can be used for cooling of , northbridge ,Southbridge ,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 25mm x 25mm x 10mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H) Weight: 30g Package Content: 5pcs x Heatsink
• Dimensions: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H)
• Model #: 11-001-328

Limited time offer, ends 07/31

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Product Description Aluminum IC heatsink for Router,power transistor, FET, IC, power amplifier, Voltage Regulator, MOSFET, SCR, etc. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 14mm x 14mm x 10mm,Please check your componet careful, and make sure the size of the heatsink fits it no problem Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 14 x 14 x 10mm/ 0.55" x 0.55" x 0.4" (L*W*H) Weight: 55g Package Content: 20pcs x Heatsink
• Dimensions: 14 x 14 x 10mm
• Model #: 11-001-322

• Model #: BP-TBEML14

• Model #: 1022493

Limited time offer, ends 07/31

• Color: silver
• Compatibility: CPU
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Tested to fit the Raspberry Pi CPU / SoC; Reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and grease. -Peel the protective liner off on the base of the heatsink. -Apply the heatsi...
• Model #: 11-001-255(10)

• Model #: BP-CBWP-C04

• Model #: BP-ACMCD500

Limited time offer, ends 07/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Product Description Aluminum IC heatsink for PC Chipset power transistor, FET, IC, power amplifier, Voltage Regulator,Computer VGA Northbridge Southbridge etc. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 35mm x 35mm x 10mm Weight: 25g Package Content: 2pcs x Heatsink
• Dimensions: 35mm x 35mm x 10mm
• Model #: 11-001-261

• Type: Fittings
• Model #: BP-ILF-TB

• Model #: 4250197144957

• Model #: 1022522