Operating Systems Supported: System Requirements
- Microsoft Windows & Apple Mac OS
- Thunderbolt5/4/3,USB4/3.2/2.0 computers
- Only compatible with M.2 M-Key and M&B-Key connector
Features: - Supports two M.2 M-Key slots, allowing simultaneous insertion of two PCle NVMe SSDs for quick expansion.
- Offline cloning function allows fast and accurate cloning of original disk data to the target disk,eliminating the transmission process.
- Supports mobile OTG function, enabling easy reading and writing of data from mobile devices to the hard disk.
- USB-C interface with a transfer rate of up to 40Gbps, compatible with Thunderbolt 5/4/3, USB4/3.2/2.0 computers.
- A single PCle 4.0 drive supports a maximum sequential read speed of 3300MB/s and a maximum seauential write speed of 3000MB/s. If you use PCle 3.0 SSD, the per...
Specifications: 1. 2 Bay Docking station with clone function for 2.5 & 3.5 inch HDD / SSD
2. High speed Type-C 3.1, save your time
3. High heat dissipation efficiency
4. IntelligentAnd durable
5. Store what you want
6.Offline clone function
Features: 5Gbps Transmission Speed: Using USB3.0 connector, UASP ultra-high speed, the transmission speed can reach up to 5Gbps and compatible with USB2.0 and USB1.1.
Support one key Offline Clone: No need to connect any PC/laptop, support one button clone function, just connect power and insert SSDs to copy data or full disk.
Specifications: Device Support: SATA III/II/I HDD or SSD or Hybrid
Device Size: 3.5" or 2.5" SATA HDD/SSD/Hybrid
Internal Interface: Standard SATA
External Interface: USB 3.1 Type C
Interface Cable x2:
USB Type-C to Type-C (for system with Type-C port)
USB Type-C to Type-A (for system with Type-A port)
USB cable Length: 30 inches / 800mm each
HD Capacity: Up to 12TB
Material: Aluminum Casing, ABS Tray
AC Adapter Output: 12VDC, 2A.
Specifications: Duplicate or dock a SATA SSD/HDD with fast performance - USB 3.1 (10Gbps) standalone duplicator dock for 2.5" & 3.5" SSD/HDD drives - HDD cloner with fast-speed SSD duplication up to 28GB/min - 2.5in and 3.5in hard drive duplicator and drive dock - Works with both USB-C and USB-A enabled devices w/ two cables included - Dual-bay duplicator dock featuring toaster-style design with drive doors and drive eject buttons - Compatible with Thunderbolt 3 USB-C port - Supports SATA I/I/III (up to 6Gbps)
Features: 1. PD Charging: Provides powerful charging capabilities with up to 100W PD fast charging, suitable for charging smartphones and laptops.
2. Video Recording: Supports ProRes HDR 4K/120 fps video recording, allowing direct video recording to external hard drives.
3. Wide Compatibility: Compatible with MAC OS, Windows, Linux, Android, and iOS systems.
4. Supported Sizes: Supports M.2 NVMe SSDs in 2230 or 2242 sizes.
5. Card Reader Compatibility: Selected models are compatible with SD/SDHC/SDXC and microSD/microSDHC/microSDXC memory cards.
6. Magnetic Back Cover: Supports magnetic attachment for Apple devices; for phones without built-in magnetic support, a magnetic ring is included for easy attachment.
7. Smart Sleep Mode: Automatically enters sleep mode after 10 m...
Specifications: Type: NVMe USB C Converter Adapter Docking Base. Input: M Key M.2 NMVe slot. Output: USB 3.1 Type C. (Come with USB Type C to C Cable, USB Type C to Type A Adapter Connector) Transfer Speed: Connect with USB 3.1 Port: 10Gbps; Connect with USB 3.0 Port: 5Gbps; Cable length: About 30cm / 12 in.
Specifications: Chipset ID: JMicron - JMS580
Drive Size: 22mm - M.2 SATA
Supported Drive Height(s): 2242 / 2260 / 2280
Compatible Drive Types: M.2 (SATA, B-Key, NGFF) / M.2 SATA (NGFF, B+M-Key)
Maximum Data Transfer Rate: 6 Gbps
MTBF: 50,000 hours
TRIM Support:Yes
Type and Rate: USB 3.1 Gen 2 - 10 Gbit/s, SATA III (6 Gbps)
UASP Support: Yes
Drive Connectors: 1 - M.2 (SATA, B-Key, NGFF) Receptacle
Host Connectors: 1 - USB Type-C (24 pin) USB 3.1 (10Gbps) Male
Note:
Not compatible with M.2 NVMe or AHCI PCI-Express SSDs
Windows 7 and earlier Windows versions do not support TRIM with USB to SATA devices.