Specifications: ATX PSU each output connectors check
Tests 20-pin and 24-pin power supplies
Tests SATA power
Tests Pentium 4 power connector
Tests PCI-Express power connectors
Tests Xeon power connectors
Tests Floppy drive connectors
Tests standard 4-pin power supply connectors
Accurate voltage indicator +/-V(+12V1/+5V/+3.3V/5VSB/+12V2/ -12V)
ATX P.G value display.
Lower or higher P.G values alarm
Lower voltage detected alarm.
Over voltage alarm.
No voltage detected alarm.
Dimension : 2.52" x 5.91" x 0.71"
Features: Cut and strip flat cable by one option Functions for 8P/RJ-45 and 6P/RJ-12, RJ-11 All steel construction for long term durability Crimps two sizes of plugs Built-in cutter and stripper Precision ground Compact size, easy to handle Ratchet mechanism to keep tool closed when not in use
Specifications: Tripp Lite's professional grade, high-volume Punch Down Cable Installation Tool, with adjustable impact, is the perfect multi-purpose tool for punching down Cat5/Cat6 cable to 110 jacks and patch panels, or, telephone wire to 66M blocks. Each blade (110 or 66) contains a cutting and non-cutting side. The blade not being used is stored in the handle compartment. Adjustable High/Low actuation setting accommodates termination requirements or installer preference.
Specifications: Test Services:
Detects IntelliTone digital signal and 1 kHz signal from analog toners.
Features a CABLEMAP capability that identifies common cable miswires such as opens, shorts, and reversed pairs in twisted pair cabling.
Ports: 1 x RJ-45 10/100Base-TX Network
Connectivity Media:
Twisted Pair
Coaxial
10/100Base-TX
Status Indicators:
8 LED indicators
1 Synch LED indicator
Batteries: Alkaline Battery
Battery Life: 20 Hour Typical
Input Voltage: 9 V DC Battery
Temperature:
32°F (0°C) to 104°F (40°C) Operating
-4°F (-20°C) to 140°F (60°C) Storage
Dimensions: 8.73" x 1.88" x 1.26"
Package Contents:
IntelliTone 200 Probe
RJ-11 and RJ-45 patch cables
Lanyard
Owners CD
Quick start guide
9 volt battery
Additional Information: POTS telecom service available
Altitude: 3000 m
Operating Relative Humidity:
95 % (50 °F to 95 °F ; 10 °C to 35 °C)
75 % (95...
Specifications: Loop Limit: 2.4 kOmaximum at 48 VDC (nominal 15 mA minimum loopcurrent)
DC Resistance (Talk Mode): 150 Otypical at 80 mA current
AC Impedance (Monitor Mode):
Low impedance (Ring position) 600 Oat 1 KHz typical
High impedance (HI Z position) 100 kOminimum at 1 KHz
Rotary Dial Output: 10 pps .5 pps
Pulsing Rate: 60 % ± 2 %
Percent Break: 800 ms typical
Interdigit Interval Leakage During Break: > 50 kO
DTMF Output: ±1 % maximum
Tone Frequency Error Level per Tone Pair: dBm maximum, - dBm minimum
High versus Low Tone Difference: 4 dB maximum
Temperature:
Operating: -5 degree C to degree C
Storage: -40 degree C to degree C
Drop: 1 meter, 4 times
Altitude: To 3,000 meters (10,000 feet) maximum
Relative Humidity: 10 %to 80 % (non-condensing)
Specifications: Test for:
Tests 20-pin and 24-pin power supplies
Tests SATA power
Tests Pentium 4 power connector
Tests PCI-Express power connectors
Tests Xeon power connectors
Tests Floppy drive connectors
Tests standard 4-pin power supply connectors
Tests for +3.3V, -12V, PG, +5VSB, +12V, -5V, +5V outputs
Note:
The -5V DC output is took off from Intel ATX12V design guide since the 1.2 version.
1. The -5V usage was for last generation ISA slot. But the old ISA had been phased out since 1993~1994.
2. Neither P3 nor P4 systems will need -5V output.
Specifications: Essential Tools for Cable Installers or Telecom/LAN Personnel
Tests Cat5, Cat6, Cat6a and telephone cable assemblies
Cable tester combines main tester unit and removable remote tester unit
Identifies connection, no connection, short circuit or open circuit
Tests multiple types: RJ11, RJ12, RJ45
Fast and slow LED flashing modes during automatic testing
Designed to Make Your Work Easier
Includes cable tester, crimping tool, LSA punchdown tool and stripper tool
Stores away in convenient carrying case
Side A - Connector 1: RJ45 (FEMALE)
Side B - Connector 1: RJ45 (FEMALE)
Specifications: Included in Package: Black leather holder
Instruction Manual
Remote Cable Tester
LED Indicators: Battery condition
Center conductor
Conductor indicators
Connected or 25 Ohm detected
No cable / No terminator
Non-parallel or 50 Ohm detected
Shielding
Short circuit detected
Product Height: 25 mm [1 in]
Product Length: 180 mm [7.1 in]
Product Weight: 250 g [8.8 oz]
Product Width: 110 mm [4.3 in]
Shipping (Package) Weight: 0.4 kg [0.9 lb]
Package Contents: OptiFiber Pro OFP2-100-QI Cable Analyzer
1 x Versiv Mainframe
1 x OptiFiber Pro Quad OTDR Module
Shoulder Strap
Carry Case
USB Interface Cable
Versiv Open Source Software CD
AC Charger
2 x Quick Clean Cleaners (1.25/2.50 mm)
2 x SC/LC Multimode Launch Cables-50 µm
2 x SC/LC Singlemode Launch Cables-9 µm
2 x OTDR Source Port Interchangeable LC Adapters
USB Fiber Inspection Video Probe with 4 Tips
SC/SC Simplex Adaptor
2 x Launch Fiber Hanging Straps and Magnets
Statement of Calibration and Getting Started Guides