Features: Robust Network Connectivity: Easily expand your network and take advantage of the dependability of a wired network connection. Ensure robust file transfers using Cat5e or Cat6 cabling to distances up to 328 feet (100 meters).
Primary Ports: 4 x M12 (X-code) Gigabit PoE+ ports
1 x M12 (X-code) Gigabit port
1 x M12 (A-code) power port
LED indicators
Wall mount
Din-Rail mount
Grounding point
Network Management Type: HTTP web-based GUI
CLI: Telnet / SSHv2
SNMP v1, v2c, v3
SNMP trap (up to 5 receivers)
RMON groups 1/2/3/9
Device configuration backup & restore, upgrade firmware, reboot, and reset to default
Multiple administrative or read-only user accounts
Enable or disable power saving mode per port
Static MAC entries
LLDP (Link layer discovery protocol)
Netlite device map
ONVIF device discovery
SNTP
SMTP alert
Syslog
Port statistics/utilization
Traffic monitor
Port mirror: one to one, many to one
Storm control: Broadcast, multicast, destination lookup failure (Min. limit: 1pps)
Loop...
Primary Ports: 16 x Gigabit PoE+ Ports; 8 x Gigabit Ports; 2 x 100/1000Mbps SFP Ports
Weight: 3.7400
Features: • 16 x Gigabit PoE+ ports
• 8 x Gigabit ports
• 2 x 100/1000Mbps SFP ports
• Up to a 480 watt full PoE+ power budget
• 52Gbps switching capacity
• Hardened IP30 rated metal switch
• Includes DIN-Rail and wall mounts
• Extreme -40 to 75 ºC (-40 to 167 ºF) operating temperature range
• Redundant power inputs with overload current protection
• Alarm output triggered by
Features: Reduce Lag and Remove Bottlenecks from Your Network: Remove bottlenecks from your home network by upgrading it to a 10/100/1000Mbps Gigabit network with this Gigabit Ethernet switch. Enjoy the fastest possible file transfer speeds and reduced lag with wired connections using Cat5e (or better) cables to distances up to 328
Features: • 8 x Gigabit PoE+ ports
• 2 x SFP ports
• Supports 100/1000Base-FX fiber SFP modules
• PoE power budget: 240W@48VDC or 124W@24VDC
• PoE alive check restarts unresponsive PoE powered devices
• 20Gbps switching capacity
• Hardened IP40 rated metal housing
• Includes DIN-Rail mounting bracket
• Operating temperature range of -40° – 75° C (-40° – 167° F)
• Supports LACP, STP/RSTP, VLAN, and IGMP Snooping
• IEEE 802.1p QoS with queue scheduling support
• Bandwidth control per port
• Redundant power inputs with overload current protection
• Alarm output triggered by power failure
• Power supply sold separately (models: TI-S24048, TI-S48048, TI-S24052, TI-S15052)
• NDAA / TAA compliant (U.S. and Canada only)
• Lifetime Warranty
Network Media: WAN Modes: NAT, Classical Routing or Bridge Mode (NAT Disabled)
NAT Loopback Enable/Disable
NAT Modes: NAT, PAT, One-to-One NAT
VLAN tag assignment on WAN interface
IPv4 WAN Modes: Dynamic IP (DHCP), Static IP, PPPoE, PPTP, L2TP
Wireless WAN Mode: NAT enable/disable, Dynamic IP (DHCP), Static IP, fast roaming signal threshold/channels
IPv6 WAN Modes: Static, Auto-configuration (SLAAC/DHCPv6),...
Features: • IP30 rated industrial power supply with integrated DIN-rail mount
• Provides up to 120 Watts of power (48 V, 2.5 A)
• Built-in active PFC (PF > 0.93)
• Short circuit/overload/over voltage/over temperature protection
• High efficiency (91%) design
• UL 508 approved
• 100 % full load burn-in test
• Extreme -25 to 70 °C