Specifications: This adapter connects a compact flash memory card to a 3.5” IDE host interface. Aiming at educational sectors, IT development, and the embedded technology enthusiast to enable the use of a compact flash card as an IDE hard drive.
Specifications: Jmicro JM20330 Chipset
Plug & Play and Hot-swapping capability
Automatic SATA 3.0/1.5 Gbps speed negotiation
Serial-ATA 1.0 specification compliant
ATA/ATAPI Ultra DMA of transfer rate 16.7, 25, 33, 48, 66, 100, 133 and 150Mbps
Support ATA PIO and UDMA modes 0 to 4
Support 3.5" IDE hard drives and 5.25" optical drives
Ultra low power consumption
Master/Slave mode support
Support Windows 98SE/ME/2000/XP Operating System
Package Contents: SATA to ATA/ATAPI IDE Interface Adaptor
SATA Cable
Power Cable
Specifications: Front Panel:
- 2 USB 3.0 Ports
- Slim Optical Drive (12.7mm) Bay
- 2.5" SATA I / II / III HDD Mobile Rack
Back Panel:
- Floppy Power Connector
- SATA Data Connector
- SATA Power Connector
- Built-in USB 3.0 20-pin Header Cable (19")
USB Data Transfer Rate Up to 6Gbps
5.25" Front Bay Mount Design
Plastic Front Panel
SECC Body
NSS Connector - Trouble Free 50000 Cycles Hot Swaps
Driver-free Operation
Tool-less Installation
Package Contents: Multipurpose 5.25" Bay Adapter
Power Cable (4")
SATA Data Cable (18")
Screws
User Manaul
Specifications: • Standard 2.5" IDE storage device form factor (100.2mm x 69.9mm x 9.8mm)
• LED indicators: Power On, Master and Slave Card Detect, and Disk Activity
• Can be a primary bootable device containing the OS and applications (depends on CF card specifications)
• Transparent to operating system and does not require any drivers
• Supports Microsoft Windows 2000, XP 32/64-bit, Server 2003 32/64-bit, Vista 32/64-bit, Server 2008 32/64-bit and Linux operating systems
• Power supply via IDE interface (44-pin SFF IDE connector, +5V)
IDE Interface
• 44-pin SFF (Small Form Factor) IDE connector
• Supports Ultra-DMA IDE Interface
• Does not support hot swap on the IDE interface
CF Interface
• 2 CF card slots (Master/Slave) supporting CF Type I form factor
• Supports PIO mode, DMA and Ultra-DMA mode with data transfer rate u...
Specifications: Specification:
Board size: 2.40" x 2.05" x 0.03" (W, L, T)
On-board LED indicators for power-on and compact flash access
Voltage selection for +3.3V or +5V compact flash
Master or slave mode selection
Power input: +5V, floppy disk drive power connector
Fully compatible with Compact Flash Type I, Type II, and Micro-drive
40-way (2.54mm) standard IDE connector
This adapter does NOT support hot insertion of CF cards
System Requirement:
PC or Mac with one IDE connector
MS Windows, Mac OS, Linux operating system
Specifications: Riser kits are the perfect solution for setting up cryptocurrency mining rigs (or any other GPU-mined altcoin), whether small open air rigs or large rack based miners.
3 High Quality Solid Capacitors for reliable and safe power delivery. Gold plated contacts for flawless connectivity and a long lifespan.
With SATA 15pin Male to MOLEX 4pin power cable for direct connection to your power supply reduces the power burden on your motherboard and ensures maximum compatibility with your power supply.
Compatible with 1x,4x,8x,16x PCI-E slot of the motherboard