Specifications: Video Resolution: 480p, 720p, 1080i and 1080p with 3D support
Video Streaming: <1ms Latency
Frequency: 4.9 ~ 5.9 GHz (Includes Non-DFS and DFS Frequency Bands)
Range: Maximum video transmission range is 30 ft. (10m)
LEDs
Power On: Transmitter: 1 x Blue LED; Receiver: 1 x LED (two-tone: green & red)
Power
Amps: 1A (Transmitter) and 1.5A (Receiver)
Voltage: 5V DC Mini USB (Transmitter and Receiver)
1 x Mini USB Power Jack (Transmitter and Receiver)
Operating Temperature: 0 ~ 40°C
Unit Dimensions: 0.75" x 1.12" x 3.12"
Weight: 1.55 lbs.
Interface: HDMI
Audio: Audio Output:
Digital 6Mbps, 2 to 8 channels 16 ~ 24 bits/sec by I2S and S/P DIF bus over WHDI transmission (Dolby Digtial & DTS)
Specification: Maximum Pixel Clock: 2x 165 MHz
Video Input Connector: (1) DVI-I 29-pin, female
Video Output Connector: (1) DVI-I 29-pin, female
Operating temperature range: +5 to +45 deg. Celsius
Power Supply: 5V DC (needed for programming only)
Power Consumption: 5 Watts (max)
Feature: Quick and easy way to store EDID information from any DVI display
Provides a virtual EDID to maintain active monitor status when switching away from a source
Supports resolutions up to 1920x1200, 2K, and 3840x2400 (Dual Link)
EDID write protection switch
No power is required after initial programming