Question 1

How to program toshiba tv ?

Accepted Answer

Manually turn on the component you want the remote to control.
    Locate the Brand Codes in the Code Lists.
    Press and hold the component key you wish to program. The illuminated ON·OFF key turns on and remains on.
    While holding the component key down, press and hold the ON·OFF key. The illuminated ON·OFF key turns off.
    After holding both keys down for three seconds, the illuminated ON·OFF key turns back on.
    Release both keys. The illuminated ON·OFF key remains on.
    Refer to the Brand Codes. Press and release the appropriate brand code key (Numbers 0-9), using the number keys. The illuminated ON·OFF key blinks once.
        Note: If you do not press a valid Brand Code Search key, the illuminated ON·OFF key blinks four times and turns off. The last programmed code under that component key is retained.
    Press and release the ON·OFF key repeatedly until your component turns off. Each time you press the ON·OFF key, the illuminated ON·OFF key blinks, and the next code is sent. The Brand Code Search begins with the first code in the chosen brand list for that component and cycles through all the codes for that brand. If your component turns off, you have found the correct code. (If it cycles through and the illuminated ON·OFF key blinks four times and turns off, all codes in the chosen brand list have been searched and another programming method should be tried. The Brand Code Search mode is exited.)
    Once you have found the correct code, save that code by pressing and releasing the STOP key. The illuminated ON·OFF key turns off. You must press the STOP key to save the code or the correct code will not be stored!
    To confirm that the component key is programmed with the correct code for maximum functionality, test the component. Attempt to control a variety of the component’s functions with the remote. If some of the features of your component do not work, program the remote with a different programming method.
Enter an answer to this question.

Question 2

How to program volume controls?

Accepted Answer

Mine works with the stored code in the device associated with my TV. If you try using a standalone volume control device, the code for that device needs to be programmed into the remote and my understanding is that all of the codes in the remote was programmed into a e-prom chip.

Questions & Answers