Question 1

Does this lock the tv in some fashion, I have a kid and I don't want him somehow pushing it off on top of himself?

Accepted Answer

Yes. The top portion rest on the lip of the bracket. You will notice that the bottom half doesn't.  So there is where the small diameter tube with the pinched end comes in.  The tube is about the length of the of the bracket.  Once you have the TV mounted slide that tube through the hole of the lower half of the bracket (horizontally). At this point the TV mount will be secured to the mount via that tube.

Let me know if this helped out.

Question 2

Will this mount onto a brick fireplace?  If so, does it come with the proper mounting accessories?

Accepted Answer

The kit does NOT contain the correct anchors for a brick wall. You will need threaded anchors (1/4" or 3/8" by 3"or 4" long). Don't use plastic mollies (anchors) for a brick wall, plastic mollies could pull out of wall. 
If your fireplace is the standard 4"x8" red brick, you will need a hammer drill or a cordless/corded drill w/ a hammer function to drill holes in brick1. If none of those two, a carbide tipped concrete bit (same size as anchors) to use in a standard drill. 
The TV mount is pretty good, had this one for a couple years. It has limited tilt, but you probably won't tilt it that much anyway. For the $$, it's worth it.  Good luck Lander.

Question 3

max vesa 700 x 500. Can I be sure that this will accept 300 x 300?

Accepted Answer

I have a 55" LG mounted in it and it is very sturdy.  Just make sure it is mounted in the wall studs.

Question 4

What is the size of wall plate? I'm looking for a wall plate that can be placed in studs that is 32" apart.

Accepted Answer

The wall plate itself is approx. 31.5 inches long, so it will not allow you to mount it in studs.. Finding a wall mount that will fit what you are asking may be difficult. I have not seen any that are any wider than the Rosewill Wall Mount you are asking about. I would suggest getting some good wall anchors. You can put one side of wall mount into studs and use the anchors on the other side. This will mount the bracket very well. I have used this method on several applications and have great success.

Question 5

Will this work with a 400x400 vesa mount?

Accepted Answer

Yes....in a manner of speaking.  The spacing works for the brackets that attach to the TV, but I had to find different bolts to attach the bracket to the TV.  The bolts provided were not long enough

Question 6

will this mount fit a tv with a vesa standard of 200x100 im new to this?

Accepted Answer

Yes, as long as the panel doesn't weigh more than 132 pounds.  If it's a small panel, this mount would be overkill.  It's fairly large and designed for panels 32 inches to 60 inches.  I used it on a 54" Plasma that weighs about 100 pounds and it worked perfectly.

Question 7

Will this fit a 600x200 VESA Compatible TV?

Accepted Answer

The product pretty much describes the answer...

The Rosewill RHTB-11006 is a high quality TV mount designed to mount your TV from 32-Inch to 60-Inch. It features 700mm x 500mm max mounting pattern and supports 132 lbs. max load. +10 degrees / -15 degrees tilt range ensures an amazing, customizable viewing experience. Integrated bubble level allows you to easily install your bracket horizontally while lockable safety bar ensures solid TV mounting. Just make sure you mount into wall studs...

Question 8

will this fit a tv with 400 x400 mm mounting holes?

Accepted Answer

Yes it will.

Questions & Answers