SCHNEIDER ELECTRIC LC1D65AB7 IEC Magnetic Contactor, 1NC/1NO, 24V AC, 3 P,

The SCHNEIDER ELECTRIC - IEC Magnetic Contactor is a non-reversing, three-pole device intended for use in motor control and resistive load applications. It is rated to operate at a coil voltage of 24V AC and has an auxiliary contact configuration of 1NO/1NC. The contactor is compatible with screw clamp terminals, allowing for secure electrical connections. With an average impedance of 1.5 mOhm, it is designed to facilitate power transmission in the circuit.

Key features include:

- A maximum operating rate specification of 3600 cycles per hour at temperatures up to 140°F (60°C). Performance may vary based on conditions.

- An associated fuse rating that conforms to IEC standards, designed with features that aim to provide overcurrent protection as per IEC standards.

- Mechanically linked auxiliary contacts type according to IEC regulations. Safety depends on proper usage and installation.

- Rated for damp heat exposure within specifications outlined by IACS E10 and IEC 60947-1 Annex Q category D.

- Compatibility code LC1D indicates potential compatibility with other devices or systems within the same series or range; actual compatibility may depend on specific models and configurations.

-Control circuit voltage limits are specified from drop-out AC: 0.3 to operational AC: 1.1 Uc for temperature variations between -40°C to +70°C

-Rated for fire resistance up to a maximum temperature of 850°C as per standard IEC60695-2; actual performance may vary based on conditions.

. This item has been restricted from sale in the following state(s): []