BEST SELLERS

In CPU Air Coolers

- Looks nice - Cools well

Easy to install, but had to find a YouTube video to explain that the extra bits of mounting hardware was to accommodate AMD as well as Intel installations.

- Solid construction - Many socket mount types - Colorful addressable LEDs and output a Rainbow when not connected to anything - Very reasonable cost

Silent, Easy to install

It is massive! No seriously it is the largest HSF I have ever seen. I was glad that I bought a full ATX case, as I am not sure how it would fit in a smaller setup. It performs amazing and is so quiet I had to check if the fan was even on. It is stealth quiet and worth every penny!

Runs beautifully for my budget build has zero problems gaming wise ( I mainly play rust which is a cpu heavy game)

Easy to install

- Easy modern mounting for AM5 - Good even contact - Great temperatures - Idle 35c / Prim95 60c / Peak 69c - Looks good - Good build quality - I think the fans sound fine, at high loads they ramp up and get louder, but its a smooth sound without any annoying hub whine or other jarring fan sounds. - Includes a fan splitter & speed switch for High 2000+ RPM, PWM default, and low 1800 RPM settings. I left mine on default PWM motherboard controlled. - Premium packaging materials and unboxing experience

Good price to performance. Low temps and a bit overkill for my Ryzen 9 3900.

No compromises air cooling

Great, it has a 270 watt tdp and it looks cool

60c CPU temperature in a 94F environment for 3 hours!

Two 120mm aRGB fans

- Quiet - Doesn't interfere with the memory - RGB setup was pretty normal - Temperatures seem decent

-Price -Easy to install (AMD 4/5) -Nearly as good as Noctua (1-2 degrees less) -Quiet

I had read comments that the fan came damaged - mine was in perfect condition. It arrived early even though it came from overseas. Super quiet too :) Took me some time to find a fan to fit my motherboard as I'm not very techy, so quite happy i have my pc back in working order :D

Keeps CPU cool (without fans!, see below)

- Excellent cooling power - Silent for my Ryzen 3600 in most conditions - Just barely fits in my Cooler Master N200 case

This is also my overall review, it's just pros. First, I am looking to cool my CPU for longevity and durability of the CPU and system, not for speed. That said: This ThermalRight air cooler is the best air cooler made, at least for what I've used so far. Understand it's 2 coolers, one for each half of your cpu and with 7 individual pipes to each heatsink, so it's 14 cooled pipes because the heatsinks are separate with a fan on each, but that's just for starters. But the big difference, the engineered design difference and you can see it for yourself, look at the photos of this cooler specifically the package contents photo. The cooler is pictured there on the upper left and no that's not a bad camera angle of the cooler. What you see there if you look closely is the pipes are longer to one side and offset to the center contact copper heatsink. When installing this cooler I'd strongly suggest you make sure to put that longer side up and have near that part of both coolers to draw and pull the heat off. This offset center with longer pipes is the huge, and I believe ultra significant, design difference. See when we place this cooler on the CPU it is on a flat horizontal surface. When this is tilted up the 90 degress it usually is in our tower cases, that angle up of the design on both heatsinks forces the heat to follow more to that side of the heatsink. the faster you pull off the heat the better as this design makes the heat rise more to that side of the heatsink, It's a law of physics heat pump essentially. This causes a higher volume of heat to be pulled off the CPU and by dissipation the lower (and slightly cooler) part of the heatsink and fins are actively transmitting the heat from that lower part to the upper part. It's ingenious in design and easily delivers the TDP of 270+ that this cooler is designed for. This ThermalRight cooler is absolutely perfect for my I7 14700KF. Browsing web temp: Around 30 Degrees C. Playing something graphics intensive, and temps averages 70-75 degrees, and never gets over 80. I had to fiddle with PWM a bit and make sure you look at the case fans to index them to the CPU temp and have them delivering cooler outside air at a faster rate than the 2 fans on this CPU cooler can take it in (i.e say 70% on CPU at 60 degrees Celsius, then make sure case fans supply at 75% at 55-60 degrees Celsius so cooler air is already in case before CPU hits 60 degrees Celsius). I must note, however, this cooler delivers even when you might not be good at adjusting the PWM fan controls. So if you're new or not really confident building a system, just make sure to get the cooler mount right on the CPU and I believe this cooler will deliver. CPU cools from 75C back down to 31C in less than 5 seconds. I used Arctic Cool 4x blah blah and usually use Ceramique so didn't expect this to be as responsive as it is. Oh and I lapped the heatsink up to 2000 grain polishing sandpaper. Beautiful discovery lapping this heatsink is the CPU surface contact heatsink is pure copper. I'll make it simple: Why spend $100+ on fluid cooling that has maintenance and still needs cleanup if you get a leak, when you can buy this ThermalRight heatsink for, at writing of review, $35 and know it will cool it perfectly through turbo temps of 5.6 ghz? And Tom's Hardware mentions the size of the cooler. I promise you it's bigger by maybe 20 cm but that the center offset makes it work out to be thinner on the video card side than a Master Cooler, which also means less heat transmission from the video card into the CPU. Also this cooler clears the curved up Corsair Vengeance DDR 5 RAM too. I hope this review helped you with your build and that if you choose this cooler you are as satisfied as I am or better. Thank you for your time.