BEST SELLERS

In Water / Liquid Cooling

The pump heads translucent fog like dome is extremely cool looking. The halo fans are also really cool with the 24 leds on each fan. I have this cooling a ryzen 9 5950x and it keeps it at great temps idle and good temps under gaming load. When rendering or benchmarking the temps get a bit high but I suppose that's to be expected with the ryzen 9 5950x.

9800x3d does internet at 45c games at 60c to 70 c with spikes to 80 if im rendering, AMAZEBALLZ!

Easy to install and comes with a universal mounting bracket for different CPU sockets plus an additional offset bracket. The fans come mounted already in a push configuration ideal for top exhaust and the wires are neatly hidden. Performance is good and typical of a solid 360 AIO, keeping my AMD 9800x3D stock temps well under 80c even during extreme stress tests. The fans and pump are relatively quiet in normal operation. Not too thick so should fit in most modern mid-tower cases/ Subjective, but I think it looks pretty nice.

- Had the 360 version and had to downsize to 240 for an ITX build. Cools just as good as the 360 and significantly quieter than any other AIO I've tested. - Best mounting system out of any AIO I've used and is dead simple to mount, especially when using Kryosheet - Non-RGB looks great while still having a unique and eye-catching pump design

240m size fits in many micro-atx cases easily pump located in radiator should open up more orientations fan sound levels are well in expected ranges

- Easy to setup ARGB with headers on the motherboard. No need for icue hubs or anything like that. - High performance fans with minimal noise unless they are under full load. Gets a bit noisy at 100% but have only experienced that during synthetic benchmarking. - Keeps my 9800x3d around 37C at idle, under 60C while gaming. CPU is not overclocked, but jumps up to 5.3Ghz at times with normal performance boosting. - Love the looks!

Reasonable price came free with my tomahawk 265k combo it was an amazing deal. Quiet, beautiful fans very classy RGB. Just flawless. This will handle any AMD CPU with ease

Easy to install and Excellent Cooling!

If you are looking for the best performance at quiet noise levels, then this is the unit for you. With a 7800x3d it will run 30's degrees Celsius at idle in the silent preset mode. With CPU demanding tasks it will run low 80's Celsius while in quiet mode. It was extremely easy to install with AMD or Intel CPU's. The RGB looks great and can easily be controlled from the MSI Center software. When you install the unit and then run windows update the MSI Center software download will automatically run.

I have both the nautilus 240 rs and 360 rs, both have worked amazing right out of the box with zero issues and cools great. Although i do recommend use a commander core xt (if you can buy one) it makes controlling the fan speeds and RGB a lot easier. But besides that i highly recommend because theyre not too expensive and the fans that come with, they push and pull a great amount of air. Perfect for someone looking to do a white build or to upgrade their AIO.

The TRYX 360 MM Panorama SE AIO is a great choice for a custom computer build. The overall build quality is very good, better than the first version, and the pump and heat block unit seems much more robust and is much smaller. The screen is not too noticeably different than the first version but is on a different bracket and allows for a vertical mode. It comes with all the necessary hardware, the unboxing is once again a treat, and all the documentation is easy to understand. On top of it being another great addition to the lineup of one of the most unique coolers on the market, there are other pros: The ARGB and non-led versions of the fans are very sturdy and well-built. They look great as well. The screen is easy to install and magnetically clicks onto the pump base, and uses forks. It has a very high resolution and is crisp and easy to understand. It is also built off of Android, as I recognized after it rebooted for a firmware update. All the cables are of high quality and the tubes are inside braided covers that look professional. They are also long enough for the big cases needed for a large cooler like this, and bend easily, and you can rotate the pump block now to fit your case, as the old one was one way only. The software for the cooler is easy to use and provides a way to upload custom backgrounds from screen capture, preferably a 1440p MP4 video, similar to animated desktop backgrounds. The inbuilt library is small but has some excellent animated backgrounds for the cooler. There is an option to show many settings, including Temp and % Usage for GPU, CPU, and RAM, as well as other voltages and temps, and date and time. You can also show the GPU and CPU model, and orient these settings on the left, middle, or right of the screen. The new SE model features waterfall mode, and a METAL mounting bracket rather than a plastic one in the first edition. It also allows for a rotatable pump base. The new SE unit is built better, and doesn't have a fan anymore.

Well packaged! Nice software and lighting features! Installed easily and perfectly in the Corsair case. Thermal compound was pre installed!

Thing thing fit perfect and runs super quit temp are way way cooler

Amazing AIO. Fans already preinstalled. Easy instructions to follow. Cools my CPU no issue

the RBG is good the BLACK finish match my black case ANTEC C8 easy to install, the OLED screen can be moved around to 180/90 is very quiet if set the fans to "silence" from your motherboard bios to control fans you can add your own videos and pictures (big plus) very nice options

I have done water cooling before and it was a PitA. This kit is different, simply bolt it on and power it up. I like simple and with this AIO, you get that. Temperatures are held down nicely and the case doesn't look crowded or cluttered when you're finished. The fans and pump run without excessive noise. Power draw is low enough to connect directly to your motherboard. Hoses and wiring is the proper length for many installations. Mounting is a breeze with included retrofit hardware. You also get a bottle of fluid for refill which should be a good thing unless you find yourself opening it in less than a years time.

The LCD display looks great not a secondary monitor but a independent screen

Sleak Straight forward Plenty of parts for odd situations

- easy to install on my AMD cpu - nice and quiet - under heavy loads, hit about 50-52C