GPU Graphics Card Support Bracket GPU Graphic Holder Brace Vertical Holster for PC Gaming GPU Brackets Braces Support Video Card for 1080ti gt 1030 2070 gt 1030 etc Graphics Cards

GPU Support Brace to Fix GPU Sag [Graphics Card Holders]

Graphics card sagging can lead to serious consequences in the long run if it is not dealt with in time. This problem generally occurs in longer mid to high-end graphics cards that have a bulky and heavy heatsink. In GPU sagging, the graphics card at one side bends down or hangs due to its weight, due to lack of support. The sagging of the GPU can put stress on your motherboard and may cause some damage to it in the long run, if the sagging persists. Some high-end motherboards do come with metal reinforced PCI-E x16 slots, but not everybody buys the top model or top-end motherboard, and in these motherboards too, you can notice some amount of graphics card sag because of the weight. Also, high-end graphics cards with metal backplate do encounter sag because of their weight and length. So, in these cases, the best way to prevent graphics card sagging is to use a GPU Support Bracket, Graphics Card Holder, or Graphics Card Sag Holder.


There are generally two types of GPU support brace or graphics card sag holders: vertical and horizontal.

Horizontal Graphics Card Holder or GPU Support Bracket is mostly an L shaped metal piece that attaches to the side of the case bracket, along with the graphics card using screws. It consists of adjustable rubber mounts or pads on the arm that makes contact with the bottom end or graphics card shroud to give the card proper support and prevents it from sagging. For the horizontal graphics card support bracket to work, the graphics card width should be slightly greater than the computer case bracket. This means that it cannot work with graphics cards having a width equal to or less than the bracket, and also with low profile graphics cards. Horizontal graphics card sag holder is also called GPU Support Bracket, GPU Support Brace, GPU Brace Support Bracket, or Horizontal GPU Sag Holster.


For our Vertical Graphics Card Holder

For our Vertical Graphics Card Holder has a stand with a shaft, on which two adjustable sliders are present, which can be locked at the desired position to provide support to the graphics card and prevents it from sagging. Vertical GPU holder can support multiple graphics


Vertical GPU support brace

Vertical GPU support brace can be used with all types of graphics cards, including the passive graphics cards with huge heatsinks, but the horizontal one does have some limitations regarding the height of the graphics card. This is basically a graphics card support stand with a solid metal bar with


The supporters have a friction locking mechanism where you just have to push the clip inside to lock the support arms

These support arms hold the graphics cards eliminate the graphics card sag completely.

You can place the graphics card holder on the bottom of the case and also on the PSU shroud if you have a full-length shroud. The holder does not consume much space and it neither restricts the airflow in your case. The height of the stand is 10.6 inches and the diameter of the stand is 4cm only.

Also, it does not interfere with your adjacent brackets and PCIe slots, and you can use other PCIe expansion cards on your motherboard without any issues.


Aluminum Vertical Graphics Card Holder Single Support Jack Bracket Desktop PC Case Video Card Stand Cooling Bracket Black

Full aluminum material, with strong supporting power, firm, and durable.

Equipped with scratch-resistant pads, protecting your card from damage.

The invisible magnetic design of the bottom, stable without shaking.

Sliding adjustment design, you can adjust the height that you need.

Compatible with traditional ATX/MATX/ITX and other PC case structures. Suitable for all kinds of graphics card on the market.