Fotodiox Pro Lens Mount Adapter Compatible with M42 Type 2 and Select Type 1 Lenses to Nikon F-Mount Cameras

Whether you're shooting digitally or on film Fotodiox offers the world's largest selection of lens adapters. Mix camera/lens platforms or reinvigorate vintage glass; Fotodiox has hundreds of ways to mount lenses onto your DSLR or SLR camera. Our adapters deliver infinity focus manual aperture control and a sturdy build for lasting quality. Take advantage of our engineering with the 1.4 x optic glass that is used to make up the focal flange distance difference between the lens and camera (distance between the lens flange and film/sensor plane). This corrective lens in our adapter allows an older lens to properly focus to infinity on the newer camera body*.

M42
Lens Compatibility Note: This adapter is Type 2 which means it works with M42 lenses that have no aperture control from the aperture ring and require a pin on the rear of lens to be depressed in order to engage the aperture ring. This adapter also works with select Type 1 M42 lenses that have no pins or tabs on the rear of lens. Compatible Nikon F Cameras (including but not limited to): D7100 D7000 D5300 D5200 D5100 D5000 D3300 D3200 D3100 D3000 D800 D800E D700 D610 D600 D300 D300S D200 D100 D50 D60 D70 D80 D90 D40 D40x N70s D4 D4S D3 D3S D3X D2 D2H D2Hs D2X D2Xs D1 D1H D1X DF Please Note: *In some cases the built-in optic may degrade the image quality because you are adding an element never designed for that particular lens; as a result this can cause soft focus chromatic aberration image artifacts etc. Use the lenses sweet spot to minimize these issues (Sweet
Spot: Aperture value on lens that provides the sharpest image). This is a manual adapter so lens functions that rely on electronic communication with the camera body (autofocus AE metering image stabilization etc. ) will be disrupted. We state infinity focus allowed because our adapters are designed to be universal which can prevent some lenses from focusing to infinity at the infinity mark. Set your camera to Manual or Aperture Priority for metering. If camera does not release be sure to enable shoot without lens in camera settings. All pictures are for illustration purposes only. Actual product may vary slightly due to ongoing improvements in design.