Pipe Marker Centering Tool - Standard 4" Y-Type Head, Measure Pipes 0.5" and Above Curv-O-Mark 6 1/2 to 4 diameter pipes

BEST OPERATION Use this manual Jackson Safety hardened centering pin angle finder with a small hammer or mallet to tap the pin in for the most effective pipe markingfalseBUILT-IN PROTRACTOR - Fitted with an adjustable dial bubble protractor (DSL) that reads in 2.5 degree incrementsfalseThis pipe centering tool has numerous functions that help with setting center lines, establishing angles and marks for butt-ins, locating points inside pipes and tanks, laying out keyways and measuring declivity. Key The Standard #6 Model may be used on pipes 1/2" in diameter and larger; The Curv-O-Mark center finder has a 4" Y-Type head fitted with an adjustable dial bubble protractor (DSL), to be used for pipes and tanks.

Use this manually operated Jackson Safety hardened centering pin with a small hammer or mallet to tap the pin in for effective pipe marking.
- PIPE MARKING TOOL Jackson Safety's Pipe Marker is an easy-to-use marking tool designed for pipe fitters and welders as an economical measuring tool for setting center lines, establishing angles and marks for butt-ins, locating points inside pipes and tanks, laying out keyways, and measuring declivity
- STANDARD SIZE This Curv-O-Mark Standard #6 model tool may be used on pipes and tanks that measure 1/2 inch in diameter or larger
- ACCURATE PLACEMENT The center finder has a 4 inch Y-type head that conforms to pipe curvature
- BEST OPERATION Use this manual Jackson Safety hardened centering pin angle finder with a small hammer or mallet to tap the pin in for the most effective pipe marking
- BUILT-IN PROTRACTOR - Fitted with an adjustable dial bubble protractor (DSL) that reads in 2.5 degree incremen