XLR Male to 1/4" TRS Cable Balanced - 25FT Quarter Inch Stereo to XLR Microphone Cord Adapter, Nylon Braided, OFC Shielded, Red Color, for Mixer, Monitor Speaker, Audio Interface, 2Pack

Noise-Free & Heavy Duty This trs to xlr adapter cord is braided design with nylon coating. The TRS tip is gold plated, it will transfer a more clear signal with no noise. Internal construction includes OFC spiral, silver paper coating and threaded cotton. These materials are all used to reduce signal interference, 90% OFC can keep out RFI and EMI, no buzz or hum will produce. We also have a drag-proof solution in the connector, so the internal wire won't break out easily15FT X2Package will come with 2X 3pin XLR male to TRS cables, each is 25FT/ 7.5 meters, red color.

Please double check if this length is right for youCustomer SupportWe offer 2 years after-sales support for this trs to xlr male cable, for any issues within 2 years, customers can come back for replacement. Our technical support is also online for 24hours. Should any issues happened after package received, customer can message us from order page. We'll give response within 12 hours- Balanced 1/4" TRS to XLR Male CableThis xlr to 1/4 quarter inch cable is used to output balanced/unbalanced audio signal from 1/4" port to xlr input device. Output device can be mixer, dj controller, podcast, keyboard, electronic drum, etc.

These devices usually has 1/4" bal/unbal output port, which are usually marked with main out, control room, FX send, Master out, Sub out, Stereo out, Stereo return, etc. Input devices are usually powered speaker, stuido monitor, interface, AMP, etc.
- TS replacement & active speakerThis stereo balanced trs cable can be used on unbalanced 1/4" mono TS port, please don't worry, only issue is that you can can still only get unbalanced output. For speaker connection, please only use for powered speakers, as passive speaker will need a preamp before it can play the sound. Please do not use to connect guitar to xlr mic input, due to mis-match impedance, your device will not receive the guitar signal.
- Noise-Free & Heavy Duty This trs to xlr adapter cord is braided design with nylon coating. The TRS tip is gold plated, it will transfer a more clear signal with no noise. Internal construction includes OFC spiral, silver paper coating and threaded cotton. These materials are all used to reduce signal interference, 90% OFC can keep out RFI and EMI, no buzz or hum will produce. We also have a drag-proof solution in the connector, so the internal wire won't break out easily.
- 15FT X2Package will come with 2X 3pin XLR male to TRS cables, each is 25FT/ 7.5 meters, red color. Please double check if this length is right for you.
- Customer SupportWe offer 2 years after-sales support for this trs to xlr male cable, for any issues within 2 years, customers can come back for replacement. Our technical support is also online for 24hours. Should any issues happened after package received, customer can message us from order page. We'll give response within 12 hour