OBD Dash Cam Power Cable USB C with Acc Detection, Plug and Play Hardwire Kit for Dash Camera with 4-Level Low Voltage Protection, LED Voltmeter, 12V-24V to 5V for Parking Mode, 11.5ft

**Important Verify Your Vehicles OBD Power First** To utilize parking mode and USB output, your vehicle must supply continuous 12V power from the OBD/OBDII port when the engine is switched off. If your OBD port does NOT deliver constant power, the dashcam will not engage parking mode, the USB port will have no output, and the dashcam will power down completely. **Check Compatibility Before You Buy** Please confirm the following: Your vehicles OBD/OBDII port provides continuous power with the engine off (consult your owners manual or use a multimeter). Your dashcam features a USBC / TypeC input port. Most vehicles support this functionality. Confirming these points before purchase ensures correct fit and complete operation.
**Simplest Installation: Just Plug into OBD2 Port** Avoid the complexity of fuse tapping or hardwiring. This kit draws power directly from your cars OBD2 port, delivering a stable 5V/3A output for your dash cam. Its the neatest, quickest, and most user-friendly method to hardwire your dash cam in moments. **4-Level Adjustable Battery Discharge Prevention** Eliminate concerns about a drained battery. The built-in smart chip provides selectable low-voltage cutoffs ( 11.6V / 11.9V / 12.5V /20min).
**20-Minute Timer Mode**: Once the engine is off and the vehicle is completely stationary, the power will turn off automatically after 20 minutes. If it does not activate, please
check the following: Your dash cam supports timelapse parking recording; The ACC solder leg adheres to the A5B5 definition (confirm with your dash cam seller); The car is fully stationary (all passengers have left). **Support for Advanced Dash Cam Features & Real-Time Monitoring** Unlock your dash cams full capabilities. This kit facilitates Continuous Recording, Parking Mode, and Timelapse Recording by supplying constant power. The integrated Automatic LED Voltmeter clearly shows your cars real-time voltage, enabling you to monitor battery condition at a glance without any tools. **Built-in Safety Fuse & Vehicle Protection** Safety is paramount! Unlike inexpensive generic cables, this kit includes a built-in fuse and multiple protective features (over-current, short-circuit, over-heat) to protect both your dash cam and your vehicles sensitive OBD2 system from electrical damage. **Complete Kit** Everything required is included in the box: the main OBD2 power adapter with LED display, a premium USB-C to USB-C charger cable, and straightforward instructions