Question 1

How much space does windows actually give you on this drive after its formatted? I read on the web somewhere that its 9.09 TB.

Accepted Answer

The reason it displays as this amount is because Windows is counting terabytes the way computers are supposed to, where 1 TB = 1024^4 bytes, whereas hard drive manufacturers specifically define in their documentation 1 TB=1000^4 bytes. The difference will only increase as the measurements increase. They blame the difference on formatting overhead, but that's the reality.

Question 2

Is there any reason why this drive cannot be used as an internal storage drive on a PC?

Accepted Answer

There is no reason you can't use this drive for internal storage. I use it for holding my video and audio collection. My 10TB is in the case with the rest of my hard drives that I use for the operating system and software prigrams. The drive is quiet and quick to respond when called upon.

Question 3

How is the noise compared to other hard disks? What are idle and heavy use temperatures?

Accepted Answer

Hay. The noise is because of the way it is designed. It is/was intended to be durable not quite. The temp issue are relevant to your environmental (room) temp(s). If the drive is doing a lot of write(s) then the temp seems to be higher than with a lot of read(s). The real trick is to put it in a place with a lot of air flow. That is a little bit hard to do with mine since I am using removable drive(s) bay(s)/rack(s). I would also suggest that you get good air flow on the bottom for the sake of the pc board and on top for the sake of the internal temp. If you look at the smart feature(s) and data you will see that there is also a internal temp sensor. As well a other climate sensor(s).  Remember heat kill(s)!

Question 4

For a drive this expensive, with such phenomenal specs, why only a 1 year warranty?

Accepted Answer

24×7 data availability backed by a 2.5M-hour MTBF and 5-year limited warranty

Brand	Seagate
Series	Enterprise Capacity 3.5
Model	ST10000NM0016
Packaging	Bare Drive

Interface	SATA 6.0Gb/s
Capacity	10TB
RPM	7200 RPM
Cache	256MB
Average Latency	4.16ms

Features	Maximum Storage Capacity for Highest Rack Space Efficiency - 10TB per drive1 for 25% more petabytes per rack - Industry's lowest power and weight for optimum data center TCO - Forged, wrought-aluminum base and a helium sealed-drive design with uniform density and no porosity - Superior material and weld-width design for a more robust, hermetically sealed-drive enclosure that protects from helium leaks - Digital environmental sensors for measuring internal humidity, pressure and temperature, helping to ensure high reliability, performance and quality - Latest hermetic interconnect technology supporting higher data rate heads and higher pin counts for extreme thermal conditions - Proven enterprise-class reliability backed by 2.5M-hr MTBF Best-Fit Applications - Hyperscale applications/cloud data centers - Massive scale-out data centers - High-capacity density RAID storage - Mainstream enterprise external storage arrays - Distributed file systems, including Hadoop and Ceph - Enterprise backup and restore - D2D, virtual tape - Centralized surveillance
Usage	For Enterprise Storage

Form Factor	3.5"
Height (maximum)	26.11mm
Width (maximum)	101.85mm
Length (maximum)	147.00mm

Sponsored Products

Seagate Exos Enterprise Capacity 3.5'' HDD 10TB (Helium) 7200 RPM SATA 6Gb/s 256MB Cache Hyperscale 512e Internal Hard Drive ST10000NM0016

Learn more about the Seagate ST10000NM0016

Customer Reviews of the Seagate ST10000NM0016

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Return Policies

Manufacturer Contact Info

Item#: N82E16822178941