Specifications: Duplicate or dock a SATA SSD/HDD with fast performance - USB 3.1 (10Gbps) standalone duplicator dock for 2.5" & 3.5" SSD/HDD drives - HDD cloner with fast-speed SSD duplication up to 28GB/min - 2.5in and 3.5in hard drive duplicator and drive dock - Works with both USB-C and USB-A enabled devices w/ two cables included - Dual-bay duplicator dock featuring toaster-style design with drive doors and drive eject buttons - Compatible with Thunderbolt 3 USB-C port - Supports SATA I/I/III (up to 6Gbps)
Features: Higher Availability
Provides utility power to attached equipment when switched to maintenance bypass mode.
Allows UPS maintenance or replacement of the UPS without discontinuing power to critical equipment.
Flexibility
Easily installed - the UPS and utility power are both connected to the MicroPOD with the supplied cords.
Allows scheduled UPS maintenance to ensure continuous uptime without having to shut down protected equipment.
Rotary switch with indicators make the unit simple to operate.
Plug-and-play connectability for both input and output.
Compatible with any brand of UPS system.
Lowest Total Cost Of Ownership
Assures system uptime during maintenance activities.
Extreme affordability.
Internal Ports: 2 x M.2 (NGFF)
PCIe v3.0 or PCIe v2.0 x4 (4 lanes)
Operating Systems Supported: Windows 7/8/8.1/10, or Linux
Specifications: Primary M.2 Type: NVMe or AHCI SSD using M Key only
Secondary M.2 Type: SATA SSD using B Key
M.2 size: Length support 22x42mm, 22x60mm or 22x80mm
Internal Interface: 2 x M.2 (NGFF)
PCIe Interface: PCIe v3.0 or PCIe v2.0 x4 (4 lanes)
Power: PCIe Bus powered (3.3V)
Operating Systems Supported: Available system board PCIe x4 or x8 or x16 slot
Optional: 5V RGB header (3-pin)
OS support like Windows 7/8/8.1/10, or Linux
For booting, requires UEFI System Board and latest OS