Electronics

Did You Find It? Save this search

Any questions? Our AI mode will help you find out quickly.

Try me now

Search Within:

Page 4/19

Sort By:Featured Items

Quick View

Audio Technica AT-VM95E Dual Moving Magnet Cartridge

Type: Turntable
Color: Green
Model #: AT-VM95E

$74^.00 –
Free Shipping

Compare

Quick View

Audio Technica AT-VMN95EN Elliptical replacement stylus

Type: Others
Model #: AT-VMN95EN

$109^.00 –
Free Shipping

Compare

Quick View

Audio Technica AT615a Precision Aluminum Turntable Bubble Level Aluminum (Silver)

Brand: Audio-Technica
Color: Orange/Black
Accessory Type: Cartridges & Needles
Specification: Frequency Response: 20 to 25,000 Hz Channel Separation: 25 dB (1 kHz) Vertical Tracking Angle: 20° Tracking Force: 1.8 to 2.2 g (2.0 g standard) Stylus Construction: Nude elliptical Recommended Load Impedance: 47 k ohms Coil Impedance: 3.2 k ohms (1 kHz) DC Resistance: 750 ohms Coil Inductance: 480 mH (1 kHz) Output Voltage: 3.2 mV (1 kHz, 5 cm/sec.) Output Balance: 1.5 dB (1 kHz) Cantilever: Aluminum pipe Static Compliance: 23 x 10-6 cm/dyne Dynamic Compliance: 7 x 10-6 cm/dyne (100 Hz)
Model #: AT615A

$44^.99 –
Free Shipping

Compare

Quick View

Audio Technica AT-VMN10xCB Bonded Conical VMx Replacement Stylus, Blue

Brand: Audio-Technica
Accessory Type: Cartridges & Needles
Feature: The AT-VMx series brings new warmth and realism to Audio-Technica's premium dual moving magnet (MM) cartridge line, delivering an expansive soundstage that's alive with musical detail. Aligning with our founder's belief that high-quality audio should be accessible to all, the AT-VMx Series is unmatched in delivering a truly affordable high-fidelity audio experience.
Model #: AT-VMN10XCB

$59^.00 –
Free Shipping

Compare

Audio-Technica - Cardioid Condenser Microphone (AT2020)

Quick View

(2)

Audio-Technica - Cardioid Condenser Microphone (AT2020)

Type: Condenser Microphones
Specification: ELEMENT: Fixed-charge back plate, permanently polarized condenser POLAR PATTERN: Cardioid FREQUENCY RESPONSE: 20-20,000 Hz OPEN CIRCUIT SENSITIVITY: -37 dB (14.1 mV) re 1V at 1 Pa IMPEDANCE: 100 ohms MAXIMUM INPUT SOUND LEVEL: 144 dB SPL, 1 kHz at 1% T.H.D. NOISE: 20 dB SPL DYNAMIC RANGE (typical): 124 dB, 1 kHz at Max SPL SIGNAL-TO-NOISE RATIO: 74 dB, 1 kHz at 1 Pa PHANTOM POWER REQUIREMENTS: 48V DC, 2 mA typical OUTPUT CONNECTOR: Integral 3-pin XLRM-type
Dimension: 6.38" (Long) x 2.05" (maximum body diameter)
Weight: 0.76 lb.
Model #: AT2020

$119^.00 –

Compare

Audio Technica AT-CAP1 Cartridge Alignment Protractor (Black)

Quick View

Lowest price

in 30 days

Audio Technica AT-CAP1 Cartridge Alignment Protractor (Black)

Brand: Audio-Technica
Color: Black
Accessory Type: Cartridge Alignment Protractor
Feature: Protractor uses the common Baerwald alignment method to set a phono cartridge's offset angle and null points Proper alignment is critical for peak cartridge performance, providing optimal tracking and minimizing distortion Suitable for tonearms with an effective length between 222 mm (8.7") and 250 mm (9.8")
Model #: AT-CAP1

$19^.00 –
Free Shipping

Compare

Quick View

Audio Technica AT-VM670xSP 78 RPM Monaural Dual Moving Magnet Phono Cartridge with Bonded Conical Stylus Grey

Brand: Audio-Technica
Accessory Type: Cartridges & Needles
Specification: Frequency Response: 20 to 20,000 Hz Vertical Tracking Angle: 20° Tracking Force: 4.5 to 5.5 g (5.0 g standard) Stylus Construction: Conical bonded (3.0 mil) Recommended Load Impedance: 47 k ohms Coil Impedance: 1.6 k ohms (1 kHz) DC Resistance: 375 ohms Coil Inductance: 240 mH (1 kHz) Output Voltage: 4.7 mV (1 kHz, 5 cm/sec.) Horizontal/Vertical Output Ratio: 20 dB (1 kHz) Cantilever: Aluminum pipe Static Compliance: 23 x 10-6 cm/dyne
Feature: AT-VMx dual moving magnet cartridge with 3.0 mil conical bonded stylus 3.0 mil conical bonded stylus designed for playing 78 RPM records Paratoroidal coils improve generating efficiency for enhanced transient response PCUHD (Pure Copper Ultra High Drawability) coils - and fewer coil turns - deliver highly res...
Model #: AT-VM670XSP

$139^.00 –
Free Shipping

Compare

Quick View

Audio Technica AT-VM510xCB Dual Moving Magnet Phono Cartridge Conical Stylus Blue/Black

Brand: Audio-Technica
Color: Blue/Black
Accessory Type: Cartridges & Needles
Specification: Frequency Response: 20 to 20,000 Hz Channel Separation: 24 dB (1 kHz) Vertical Tracking Angle: 20° Vertical Tracking Force: 1.8 to 2.2 g (2.0 g standard) Recommended Load Impedance: 47 k ohms Coil Impedance: 3.2 k ohms (1 kHz) DC Resistance: 750 ohms Coil Inductance: 480 mH (1 kHz) Output Voltage: 5.0 mV (1 kHz, 5 cm/sec.) Output Balance: 1.5 dB (1 kHz) Cantilever: Aluminum pipe Static Compliance: 23 x 10-6 cm/dyne Dynamic Compliance: 7 x 10-6 cm/dyne (100 Hz)
Model #: AT-VM510XCB

$99^.00 –
Free Shipping

Compare

Audio-Technica AT-SBC1-BG Sound Burger Case, Beige

Quick View

(1)

Audio-Technica AT-SBC1-BG Sound Burger Case, Beige

Model #: AT-SBC1-BG

$59^.00 –
Free Shipping

Compare

Quick View

Audio Technica AT-UMX3WH Live Streaming USB Audio Mixer Interface , White

Brand: Audio-Technica
Inputs: MIC: XLR/TRS combo jack LINE (GUITAR): 6.3 mm (1/4") standard jack (Hi-Z) LINE (KEYBOARD): 6.3 mm (1/4") standard jack, L/MONO and R USB STEREO INPUT
Outputs: HEADPHONE OUT: 3.5 mm (1/8") stereo mini jack USB STEREO OUTPUT
Frequency Response: 20 Hz to 20 kHz
Model #: AT-UMX3WH

$159^.00 –
Free Shipping

Compare

Quick View

Audio Technica AT-VM520xEB Dual Moving Magnet Phono Cartridge with Bonded Elliptical Stylus Navy/Black

Brand: Audio-Technica
Color: Black / Blue
Accessory Type: Cartridges & Needles
Specification: Frequency Response: 20 to 20,000 Hz Channel Separation: 24 dB (1 kHz) Vertical Tracking Angle: 20° Tracking Force: 1.8 to 2.2 g (2.0 g standard) Stylus Construction: Elliptical bonded Recommended Load Impedance: 47 k ohms Coil Impedance: 3.2 k ohms (1 kHz) DC Resistance: 750 ohms Coil Inductance: 480 mH (1 kHz) Output Voltage: 5.0 mV (1 kHz, 5 cm/sec.) Output Balance: 1.5 dB (1 kHz) Cantilever: Aluminum pipe Static Compliance: 23 x 10-6 cm/dyne Dynamic Compliance: 7 x 10-6 cm/dyne (100 Hz)
Model #: AT-VM520XEB

$109^.00 –
Free Shipping

Compare

Audio-Technica AtLP60XBW Fully Automatic Belt-Drive Stereo Turntable Brown/Black

Quick View

(3)

Audio-Technica AtLP60XBW Fully Automatic Belt-Drive Stereo Turntable Brown/Black

Part Number: AT-LP60X-BW
Type: MI - Turntables & Cartridges
Color: Brown
Accessory Type: Belt Drive Turntables
Model #: AT-LP60x-BW

$189^.00 –
Free Shipping

Compare

Quick View

Audio Technica AT-VM750xSH Dual Moving Magnet Phono Cartridge with Nude Shibata Stylus Brown/Gold

Brand: Audio-Technica
Color: Black/Gold
Accessory Type: Cartridges & Needles
Specification: Frequency Response: 20 to 27,000 Hz Channel Separation: 26 dB (1 kHz) Vertical Tracking Angle: 20° Tracking Force: 1.8 to 2.2 g (2.0 g standard) Stylus Construction: Nude Shibata Recommended Load Impedance: 47 k ohms Coil Impedance: 3.2 k ohms (1 kHz) DC Resistance: 750 ohms Coil Inductance: 480 mH (1 kHz) Output Voltage: 3.7 mV (1 kHz, 5 cm/sec.) Output Balance: 1.0 dB (1 kHz) Cantilever: 0.28 mm (0.01") diameter solid boron Static Compliance: 20 x 10-6 cm/dyne Dynamic Compliance: 7 x 10-6 cm/dyne (100 Hz)
Model #: AT-VM750XSH

$369^.00 –
Free Shipping

Compare

Audio Technica Fully Automatic Belt-Drive Turntable - Gun Metal

Quick View

(3)

Audio Technica Fully Automatic Belt-Drive Turntable - Gun Metal

Brand: AudioTechnica
Part Number: AT-LP60X-GM
Type: MI - Turntables & Cartridges
Color: Black
Model #: AT-LP60X-GM

$189^.00 –
Free Shipping

Compare

Quick View

Audio Technica AT628A Premium Disk Stabilizer - Stainless Steel (Sliver)

Brand: Audio-Technica
Color: Silver
Feature: Precision-machined stainless-steel stabilizer holds records firmly in place for reduced resonance and improved sound quality Two recessed inner rings on the underside of the stabilizer accommodate records that bulge slightly near the spindle hole Easy to grip with fingers Approx. 450 g (15.9 oz) Fits spindles up to 21 mm long Works with a wide variety of turntables, including most Audio-Technica step-up and premium models* Made in Japan *Check with your turntable's manufacturer to confirm that it can support the weight of the AT628a. The AT628a should not be used with the following Audio-Technica turntables: AT-LP3XBT, AT-LPW30, and all entry-level models, including the Sound Burger and turntables in the AT-LP60, AT-LP60X and AT-LP70X Series. Please reach out to our Audio Solutions T...
Model #: AT628A

$79^.99 –
Free Shipping

Compare

Quick View

Audio-Technica At-LP60X-BW Fully Automatic Belt-Drive Stereo Turntable, Hi-Fi, 2 Speed, Dust Cover, Anti-Resonance, Die-Cast Aluminum Platter Brown

Type: Turntable
Model #: AUDCATLP60XBW

$200.99
$199^.49 –
Free Shipping

Compare

Quick View

Audio Technica AT-VMN40xML Nude Microlinear Red - VMx - Replacement Stylus -

Brand: Audio-Technica
Color: Red
Accessory Type: Cartridges & Needles
Specification: Tracking Force: 1.8 to 2.2 g (2.0 g standard) Stylus Construction: Nude Microlinear Cartridge (sold separately): AT-VM740xML
Model #: AT-VMN40XML

$169^.00 –
Free Shipping

Compare

Quick View

Audio Technica AT-VM745xML Dual Moving Magnet Phono Cartridge with Nude Microlinear Stylus Crimson/Gold

Model #: AT-VM745XML

$329^.00 –
Free Shipping

Compare

Quick View

Audio Technica AT-VMN95EBK Replacement Stylus (Black)

Model #: AT-VMN95EBK

$52^.00 –
Free Shipping

Compare

Quick View

Audio Technica AT-LP70XBT-BS Automatic Belt-Drive Turntable - Black/Silver

Brand: Audio-Technica
Part Number: AT-LP70XBT-BS
Type: Turntable
Color: Black/Silver
Model #: AT-LP70XBT-BS

$299^.00 –
Free Shipping

Compare

Audio Technica AT-VMN95E Elliptical Stylus for use with Cartridge AT-VM95E (Green)

Quick View

Lowest price

in 30 days

Audio Technica AT-VMN95E Elliptical Stylus for use with Cartridge AT-VM95E (Green)

Brand: Audio-Technica
Color: Green
Accessory Type: Cartridges & Needles
Specification: 0.3 x 0.7 mil elliptical replacement stylus for these cartridges:
Model #: AT-VMN95E

$52^.00 –
Free Shipping

Compare

Quick View

Audio Technica AT-VMN30xEN Nude Elliptical Orange - VMx - Replacement Stylus

Brand: Audio-Technica
Color: Orange
Accessory Type: Cartridges & Needles
Specification: Tracking Force: 1.8 to 2.2 g (2.0 g standard) Stylus Construction: Nude elliptical Cartridge (sold separately): AT-VM530xEN
Model #: AT-VMN30XEN

$139^.00 –
Free Shipping

Compare

Quick View

Audio Technica AT-VM530xEN Dual Moving Magnet Phono Cartridge with Nude Elliptical Stylus Orange/Black

Brand: Audio-Technica
Color: Orange/Black
Accessory Type: Cartridges & Needles
Specification: Frequency Response: 20 to 25,000 Hz Channel Separation: 25 dB (1 kHz) Vertical Tracking Angle: 20° Tracking Force: 1.8 to 2.2 g (2.0 g standard) Stylus Construction: Nude elliptical Recommended Load Impedance: 47 k ohms Coil Impedance: 3.2 k ohms (1 kHz) DC Resistance: 750 ohms Coil Inductance: 480 mH (1 kHz) Output Voltage: 3.2 mV (1 kHz, 5 cm/sec.) Output Balance: 1.5 dB (1 kHz) Cantilever: Aluminum pipe Static Compliance: 23 x 10-6 cm/dyne Dynamic Compliance: 7 x 10-6 cm/dyne (100 Hz)
Model #: AT-VM530XEN

$199^.00 –
$6.81 Shipping

Compare

Quick View

Audio-Technica AT607a Cartridge Stylus Cleaner

Accessory Type: Stylus Cleaner
Model #: AT607A

$27^.99 –
Free Shipping

Compare

Quick View

Audio-Technica ATN95EX Replacement Stylus

Model #: ATN95EX

$74^.00 –
Free Shipping

Compare

Audio Technica AT-HS6 Universal 1/2" Mount Headshell (Black)

Quick View

Lowest price

in 30 days

Audio Technica AT-HS6 Universal 1/2" Mount Headshell (Black)

Brand: Audio-Technica
Color: Black
Feature: Universal 1/2"-mount headshell for 4-pin turntable cartridges Ultra-lightweight aluminum die-cast body keeps vibration to the bare minimum Finger lift enables precise stylus placement Equipped with color-coded lead wires Includes mounting screws
Model #: AT-HS6BK