Mobile Rack Drives Support: Multi 2.5" Drives to 5.25" Bay
Mobile Rack Interface: SATA I/II/III
Specifications: Host Interface: 7 pin SATA x 4
Drive Fit: 2.5" SATA I / II / III SSD or hard drive x 4
Drive Bay: Single 5.25" half height device bay
Transfer Rate: Up to 6 Gb / sec. (depending on hard drive speed)
Insert& Extract connection Via: Direct SATA hard drive connection
Structure: SECC
Device Power: Single 4 pin Molex power
Drive Cooling:
Dual 40mm rear cooling fan + fan power switch
Metal heat dispersion
Power Indicator: Solid Green LED
HDD Access Indicator: Flashing Amber LED
Dimension (L x W x H): 6.70" x 5.75" x 1.63"
Weight: 1.77 lbs.
Specifications: Data transfer rate: USB 3.1 Gen 2 up to 10Gbps (Compatible with USB 3.1 Gen 1 / 3.0 / 2.0 / 1.1)
LED indicator :
Solid Blue: Powered
Blinking Blue: Reading / writing
Support type of M.2 SSD:
B Key SATA Type M.2 SSD x 1
Support 22mm x 60mm or 22mm x 80mm size
Controller: VIA VL715
Mobile Rack Drives Support: Multi 2.5" Drives to 3.5" Bay
Mobile Rack Interface: SATA I/II/III
Specifications: Color: Matt Black Host Interface: 7 pin SATA x 2 Drive Fit: 2.5" SATA I/II/III SSD or HDD (9.5mm thickness) Drive Bay: 3.5" floppy drive bay Transfer Rate: Up to 6 Gb/sec. (depending on hard drive speed) Insert& Extract connection Via: Direct hard drive SATA connection Structure: Full Metal Device Power: 15 pin SATA power x 1 Drive Cooling: Airflow vents with metal heat dissipation Power Indicator: Solid Green LED (Power On) HDD Access Indicator: Flashing Amber LED Dimension (L x W x H): 133 x 101.2 x 25.4mm
Operating Systems Supported: Windows 7/8/8.1/10 64-Bit, UEFI 2.3.1 or later
Specifications: Built in M.2 M-Key Recep5cal Connector
PCI Express Base Specifica5on Rev 3.0
NVM Express 1.2a
3.3v, 5A maximum output current
Short Circuit Protec5on
Thermal Shutdown Protec5on
Windows 7/8/8.1/10 64-Bit
Package Contents: 1 x Adapter
1 x Copper Nut
1 x M3x3 Screw, M3x5 Screw
2 x Washers
1 x SFF-8643 to U.2 Adapter Cable
Specifications: Unit Dimension: 15.50 x 69.00 x 133.00mm Power Input: Logic: 2.97V to 3.63V, 4.5V to 5.5V Fan: 11.4V to 12.6V RGB LED: 4.5V to 5.5V Cable: USB: 440mm SATA Power: 465mm Thermal sensor: 610mm Fan extension: 300mm RGB LED channels: Two 2-pin connector Max. RGB LED strip per channel: 4 Max. RGB fan per channel:6 through 1 RGB LED hub
Mobile Rack Drives Support: Multi 2.5" Drives to 5.25" Bay
Mobile Rack Interface: SATA I/II/III
Specifications: Color: Matt Black Host Interface: 7 pin SATA x 6 Drive Fit: 2.5" SATA I / II / III SSD or hard drive x 6(9.5mm thickness) Drive Bay: Single 5.25" half height device bay Transfer Rate: Up to 6 Gb/sec. (depending on hard drive speed) Insert& Extract connection Via: Direct SATA hard drive connection Structure: Aluminum & SECC Device Power: Dual 4 pin Molex power Drive Cooling: 40mm rear cooling fan with fan switch (High/ Low/ Off) Metal heat dispersion Power Indicator: Solid Green LED HDD Access Indicator: Flashing Amber LED Dimension (L x W x H): 5.84" x 5.75" x 1.63"