Specifications: IMPORTANT NOTE: This vertical graphics card holder kit is designed for standard ATX chassis with at least 7 available PCI slots & You need to GIVE UP the access to these 7 PCI slots at the back panel of your chassis.
Operating Systems Supported: Windows 8
Windows 7
Vista
Windows XP
Windows ME
Windows 98/98SE/98ME
Server 2003
Server 2000(32bit Only)
Linux Kernal 2.4 & 2.6
Mac 10.4 & Above
Specifications: PCI Express:
Fully Compliant with PCI Express Base Specification, Revision 1.0a
PCIe Multi Function Peripheral Controller with x1 lane Interface
Support for D1, D2, D3 Hot and D3 Cold
Utilizes 100-MHz Differential PCI Express Common Reference Clock
Support PCIe Power Management
Serial Port:
Four 16c450/550/Extended 550 Compatible UARTs
Supports RS232 Modes
Bi-directional Speeds from 50 bps to 16 Mbps/Port
Full Serial Modem Control
Supports Hardware, Software Flow Control
5, 6, 7, 8 and 9-bit Serial Format Support
Support MODEM Modem Signals CTS, DSR, RI, DCD, th...
Specifications: Dimension (WxHxD) 347x146x141 mm / 13.66 x 5.75 x 5.55 inches
Material Powder coated steel, ABS plastic
Chassis Support Chassis with 7 open PCI slot area
PCIe generation PCIex16 Gen5.0
GPU thickness support unrestricted
GPU length support 365mm
GPU tilt angle support Vertical, tilt 15 to 30 degrees
LED lighting D-RGB LED Strip, 15 LED chips
LED max power draw 0.20A
Specifications: Dimension (WxHxD) 347x146x141 mm / 13.66 x 5.75 x 5.55 inches
Material Powder coated steel, ABS plastic
Chassis Support Chassis with 7 open PCI slot area
PCIe generation PCIex16 Gen5.0
GPU thickness support unrestricted
GPU length support 365mm
GPU tilt angle support Vertical, tilt 15 to 30 degrees
LED lighting D-RGB LED Strip, 15 LED chips
LED max power draw 0.20A