Ports: 4 x USB Type-A (9 pin) USB 3.0 Female
2 x USB Type-C (24 pin) USB 3.0 Female
1 x USB 3.0 A (Fast-Charge, 9 pin, SuperSpeed) Female
1 x USB Type-B (9 pin) USB 3.0 Female
Specifications: Test Pin Configuration:
- RJ45 EIA, TIA-568A/568B, and crossover cables
- RJ9, RJ11, RJ12, RJ14, RJ25, RJ45, and RJ61
- USOC 2, 4, 6, and 8
- Coax Video-BNC and CATV-F
- USB 3.0, USB 2.0
Transmitter Unit Interface:
- 1 x RJ port
- 1 x USB 3.0/2.0 Type-A port
- 1 x USB 3.0/2.0 Type-B port
- Test button
- Mode button
- On/off button
- LED indicators
- Battery compartment
- Receiver unit attachment port
Power Source
- Transmitter: 9 V DC battery (not included)
- Remote unit: No power needed
Ports: Ports: 4
Side A - Connector 1: USB C (MALE)
Side B - Connector 1: (2) USB 3.0 A (FEMALE)
Side B - Connector 2: USB C (FEMALE)
Side B - Connector 3: MICRO SD (FEMALE)
Side B - Connector 4: SD (FEMALE)
Temperature: Storage Temperature Range: -10 to 75 degree centigrade
Operating Temperature: 0 to 50 degree centigrade
Package Contents: U360-010C-2X3 10-Port USB 3.0 / USB 2.0 Combo Hub
USB-A to USB Micro-B 3.0 Cable, 3 ft.
External Power Supply (Input: 100-240V, 50/60 Hz, 1.5A; Output: 5V 4A)
4 x International Plug Adapters (North America, U.K., Europe, Australia)
Specifications: USB Specification: USB 3.0 (up to 5 Gbps); USB 3.1 Gen 1 (up to 5 Gbps)
Driver Required: No
Recommended Category Cable: N201-Series Cat6 Gigabit Snagless Patch Cables
Auto MDIX Support: Yes
Full Duplex Support: Yes
Suspend Mode Support: Yes
Remote Wakeup Support: Yes
Specifications: Interface: USB 3.0 & eSATA
Number of Drives: 2
Drive Size: 2.5in & 3.5in
Drive Type: SATA
Drive Installation: Removable
Chipset ID: JMicron - JMS562
Drive Connectors: 2 - SATA Data & Power Combo (7+15 pin) Receptacle
Host Connectors:
1 - eSATA (7 pin; Data) Female
1 - USB 3.0 B (9 pin; SuperSpeed) Female
Type and Rate: USB 3.0 - 5 Gbit/s
UASP Support: Yes
Type and Rate: SATA III (6 Gbps)
Max Drive Capacity: Currently tested with up to 4TB 7200 RPM 3.5" hard drives per bay (8TB total) and 2TB 5900 RPM 2.5" hard drives (2TB total)
Insertion Rating: 15,000 Cycles
Specifications: Connector(s):
1 - Drive Connectors: M.2 (PCIe, SATA, M-Key, NGFF)
1 - Host Connectors: USB 3.1 USB Type C (10 pin, Gen 2, 10 Gbps)
Interface: USB 3.1 Gen 2
Bus Type: USB 3.2 Gen 2 10Gbps
Number of Drives: 1
Drive Size: 22 mm - M.2 NVMe
Compatible Drive Types: M.2 (PCIe, NVMe, M-Key, NGFF)
Drive Installation: Fixed
Compatible Drive Types: M.2 SATA (NGFF, B+M-Key)
Supported Drive Height(s):
2230
2242
2260
2280
Chipset ID: Realtek - RTL9210B
1 - LED Indicators: Power & Activity
Maximum Data Transfer Rate: 10 Gbps
Type and Rate: USB 3.2 Gen 2 - 10 Gbit/s
UASP Support: Yes
TRIM Support: Yes
4Kn Support: Yes
Type and Rate: NVMe (PCIe Gen 3)
Insertion Rating:
USB-C: 10,000 cycles
M.2: 60 Cycles
General Specifications: Fully compatible with M.2 SATA, AHCI and PCIe NVMe based drive...
Specifications: MTBF: 30,000
Type and Rate: USB 3.0 - 5 Gbit/s
UASP Support: Yes
Drive Connectors: 2 x SATA Data & Power Combo (7+15 pin) Receptacle
Host Connectors: 1 x USB Type-B (9 pin) USB 3.0 Female
Specifications: Duplicate or dock a SATA SSD/HDD with fast performance - USB 3.1 (10Gbps) standalone duplicator dock for 2.5" & 3.5" SSD/HDD drives - HDD cloner with fast-speed SSD duplication up to 28GB/min - 2.5in and 3.5in hard drive duplicator and drive dock - Works with both USB-C and USB-A enabled devices w/ two cables included - Dual-bay duplicator dock featuring toaster-style design with drive doors and drive eject buttons - Compatible with Thunderbolt 3 USB-C port - Supports SATA I/I/III (up to 6Gbps)