Mobile Rack Drives Support: 1 x 2.5" Drive to PCI Slot
Mobile Rack Interface: SATA I/II/III
Specifications: Max. HD Capacity: 500 GB
Enclosure Type: Aluminum and Steel
Compatible Drives: 2.5" SATA
Host Connectors: 1 - 7 pin SATA DATA Male
Host Connectors: 1 - 15 pin SATA Power Male
Drive Connectors: 1 - 7 pin SATA DATA Female
Drive Connectors: 1 - 15 pin SATA Power Female
Specifications: 4Kn Support: Yes
Hot Swap Capability: Yes
Insertion Rating: 50,000 cycles
Max Drive Capacity: Currently tested with up to 10TB 7200 RPM hard drives
Maximum Data Transfer Rate : 6 Gbps
S.M.A.R.T. Support: Yes
TRIM Support: Yes
Type and Rate: USB 3.0 - 5 Gbit/s / SATA III (6 Gbps)
UASP Support: Yes
Package Contents: USB 3.0 to M.2 SATA External SSD Enclosure with UASP
1 x USB 3.0 Cable
1 x SSD screw kit
1 x Mini Screw Driver
1 x Instruction Manual
Specifications: Chipset ID: JMicron - JMS580
Drive Size: 22mm - M.2 SATA
Supported Drive Height(s): 2242 / 2260 / 2280
Compatible Drive Types: M.2 (SATA, B-Key, NGFF) / M.2 SATA (NGFF, B+M-Key)
Maximum Data Transfer Rate: 6 Gbps
MTBF: 50,000 hours
TRIM Support:Yes
Type and Rate: USB 3.1 Gen 2 - 10 Gbit/s, SATA III (6 Gbps)
UASP Support: Yes
Drive Connectors: 1 - M.2 (SATA, B-Key, NGFF) Receptacle
Host Connectors: 1 - USB Type-C (24 pin) USB 3.1 (10Gbps) Male
Note:
Not compatible with M.2 NVMe or AHCI PCI-Express SSDs
Windows 7 and earlier Windows versions do not support TRIM with USB to SATA devices.
Operating Systems Supported: System Requirements
- Microsoft Windows & Apple Mac OS
- Thunderbolt5/4/3,USB4/3.2/2.0 computers
- Only compatible with M.2 M-Key and M&B-Key connector
Features: - Supports two M.2 M-Key slots, allowing simultaneous insertion of two PCle NVMe SSDs for quick expansion.
- Offline cloning function allows fast and accurate cloning of original disk data to the target disk,eliminating the transmission process.
- Supports mobile OTG function, enabling easy reading and writing of data from mobile devices to the hard disk.
- USB-C interface with a transfer rate of up to 40Gbps, compatible with Thunderbolt 5/4/3, USB4/3.2/2.0 computers.
- A single PCle 4.0 drive supports a maximum sequential read speed of 3300MB/s and a maximum seauential write speed of 3000MB/s. If you use PCle 3.0 SSD, the per...
Specifications: Chipset ID: Xlinx - Spartan-6
Compatible Drive Types: SATA & USB Flash Drive
Fan(s): No
Number of Drives: 2
Maximum Data Transfer Rate: 6.6 GB per minute
Port Multiplier: No
Drive Connectors:
2 x 22 pin SATA Data + Power (7 + 15 pin) Receptacle
2 x USB Type-A (4 pin) USB 2.0
LED Indicators:
4 x Power/Activity
4 x Drive connection
4 x Drive error
Center Tip Polarity: Positive
Input Current: 1.4A
Input Voltage: 100 - 240 AC
Output Current: 5A
Output Voltage: 12 DC
Plug Type: M
Power Consumption (In Watts): 60
Power Source: AC Adapter Included
Enclosure Type: Steel
Mobile Rack Drives Support: 1 x 2.5" Drive to PCI Slot
Mobile Rack Interface: SATA I/II/III
Specifications: Supports SATA I / II / III 6Gbps HDD / SSD
NSS Connector for Easy, and Scratch Free Hot Swapping
Tool-free HDD / SSD Insertion and Ejection
Triangular Lock to Secure the HDD / SSD
Activity LED Indicator
Aluminum Case
Superior Satin Finishing