Standards: IEEE 802.3 Ethernet, 10Base-T
IEEE 802.3u Fast Ethernet, 100Base-TX, 100Base-FX
IEEE 802.3x Full-duplex flow control
Primary Ports: 4 x port 10/100Base-TX RJ-45 with auto MDI / MDI-X function for ISW-511T series
1 x port 100Base-FX interface on ISW-511T for up to 2 km (multi-mode fiber 62.5/125µm, 50/125µm) transmission distance
Specifications: Interfaces:
PoE IN:1 x 10/100/1000BASE-T Ethernet with IEEE 802.3at PoE "Data + DC power" in auto MDI/MDI-X, auto-negotiation RJ45 connector
PoE OUT: 2 x 10/100/1000BASE-T Ethernet with IEEE 802.3at/802.3af PoE "Data + DC power" out auto MDI/MDI-X, auto-negotiation RJ45 connector
Power over Ethernet
PoE Standard:
"PoE In" Port: IEEE 802.3at Power over Ethernet Plus end-span/mid-span PD class 4 PD
Per "PoE Out" Port:
IEEE 802.3at Power over Ethernet Plus end-span PSE
IEEE 802.3af Power over Ethernet end-span PSE
PoE Power Supply Type: End-span (Type A)
PoE Power:
"PoE In" Port: 52 - 56V DC, max. 30.8 watts
Per "PoE Out" Port: 44 - 55V DC, max. 25 watts
Power Pin Assignment:
"PoE In" Port: 1/2 (+), 3/6 (-); 4/5 (+), 7/8 (-)
Per "PoE Out" Port: 1/2 (+), 3/6 (-)
Data Rate: 10/100/1000Mbps
MAC Address Table: 2K
Data Bu...
Standards: IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3x Flow Control
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
Features: Management interface:
Ethernet
Bluetooth
Networking interface: (1) GbE RJ45 port
Memory:
32 GB eMMC
3 GB RAM
SSD capacity: 1 TB 2.5" SATA SSD (user-upgradeable*)
*CloudKey+ only supports drives that can operate on 5V power. Drives that require additional power are not supported.
Power method:
PoE
Quick charge 2.0/3.0 power adapter, 9V DC, 2A
Max. power consumption 9.6W
Display 1.42" gray-scale OLED
LEDs: (1) Power: white/blue
Buttons:
(1) Power
(1) Factory reset
Ambient operating temperature: 0 to 35° C (32 to 104° F)
Ambient operating humidity: 20 to 80% noncondensing
Certifications: FCC, CE, IC
Capacity
HD cameras: 24
2K cameras: 14
4K cameras: 8
*Assumes the UCK-G2-PLUS is dedicated to UniFi Prot...
Standards: IEEE 802.3 Ethernet, 10Base-T
IEEE 802.3u Fast Ethernet, 100Base-TX, 100Base-FX
IEEE 802.3x Full-duplex flow control
Primary Ports: 4 x port 10/100Base-TX RJ-45 with auto MDI / MDI-X function for ISW-621T series
2 x port 100Base-FX interface on ISW-621T for up to 2km (multi-mode fiber 62.5/125µm, 50/125µm) transmission distance