Interface: One 10/100/1000/2.5GBASE-T Gigabit Ethernet (RJ-45) ports with Auto Uplink (Auto MDI-X) supporting IEEE 802.3af or 802.3at Power over Ethernet (PoE)
Wireless Data Rates: 5 GHz: Up to 867 Mbps
2.4 GHz: Up to 300 Mbps
Frequency Band: 2.4 GHz / 5 GHz
Interface: Uplink port: One 10/100/1000 Mbps Ethernet Port, accepts 802.3af or 802.3at PoE
Access ports: Three 10/100/1000 Mbps Ethernet Ports with one PoE power pass-thru port
Interface: One 10/100/1000/2.5GBASE-T Gigabit Ethernet (RJ-45) ports with Auto Uplink (Auto MDI-X) supporting IEEE 802.3af or 802.3at Power over Ethernet (PoE)
Wireless Data Rates: Max bandwidths and peak data rate per band: 20/40 (2.4 GHz), 20/40/80 (5 GHz), 20/40/80/160 (6 GHz), and maximum peak data rate 3.9 Gbps
Frequency Band: 2.4 GHz and 5 GHz and 6 GHz
Interface: Wired network interface: 2 x 2.5GbE
Ports: E0, E1: Two Ethernet wired network ports (RJ-45); Autosensing link speed (100/1000/2500BASE-T) and MDI/MDX; 2.5Gbps speed complies with NBase-T and 802.3bz specifications; POEPD: 48Vdc (nominal) 802.3af/at/bt POE (class 3 or higher); 802.3az Energy Efficient Ethernet (EEE)
Interface: E0, E1: Two Ethernet wired network ports (RJ-45), auto-sensing link speed (100/1000/2500BASE-T) and MDI/MDX
DC power interface
USB 2.0 host interface (Type A connector)
Visual indicators (four multi-color LEDs)
Reset button: factory reset, LED mode control
Security: Integrated Layer 7 firewall with mobile device policy management
Real-time WIDS / WIPS with alerting and automatic rogue AP containment with Air Marshal
Flexible guest access with device isolation
VLAN tagging (802.1q) and tunneling with IPsec VPN
PCI compliance reporting
WEP, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X
EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM
TKIP and AES encryption
Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration
Cisco ISE integration for Guest access and BYOD Posturing
Power Supply: IEEE 802.3af Ethernet switch
Cisco Power Injector - SB-PWR-INJ2-xx
AC adapter - SB-PWR-12V / 1.5A power adapter in a box
POE power
Peak power: 9.5Watts
Power Supply: Power Supply: 24V, 0.5A Gigabit PoE Adapter (Included)
Max. Power Consumption: 8.5W
Power Method: Passive PoE (Pairs 4, 5+; 7, 8 Return)
Supported Voltage Range: 20 to 26V DC
Interface: 1 x 100/1000/2500 Base-T (Ethernet) Uplink Interface
3 x 10/100/1000 Base-T (Ethernet) Downlink Interface (LAN1,LAN2 and LAN3, LAN1 supports 10.5W PSE Power Budget)
Standards: IEEE 802.11ax
LEDs: Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors