Adapter & Gender Changer

(167)

• Parts: 1 Year
• Model #: 1125SS-V1-BK-EP

• Connector A: 1x USB 3.0 male
• Connector B: 1x 2.5in SATA III
• Model #: E000133-1

• Changer Type: USB-C to USB 3.0 Female Adapter
• Connector A: 1x USB Type-C male
• Connector B: 1x USB 3.0 female
• Labor: 18 Months
• Model #: B87310A1

• Type: M.2 port (M key) into one PCIe x4
• External Ports: M.2 (NGFF)
• Internal Ports: PCI Express x 4 via full size x 16 pinout
• Operating Systems Supported: • A computer and BIOS (usually set to AHCI) compatible with NVMe SSD over PCIe lanes. • Windows 7 with Microsoft’s Hotfixes for NVMe SSD. • Windows 8 and above. • Linux. • If after installation you get a yellow exclamation mark under the Device Manager, you may need to get an additional driver
• Model #: EC-PCIE

• Part Number: EC-SSHD
• Color: N/A
• Cable Length: 4 In
• Changer Type: USB 3.0 to SSD/2.5''
• Model #: EC-SSHD

(45)

• Model #: AC325-1S-V1-BK

• Type: PCI Express to M.2 Card
• External Ports: M.2
• Internal Ports: PCIE
• Data Transfer Rate: PCIE 4.0 X4
• Model #: PA09-HS

• Model #: PA-22110

Limited time offer, ends 06/01

• Dimensions: 115*25*6 mm.
• Specifications: Item: M. 2 SSD to USB 3.1 Type A Adapter Board. Material: PCB Board. Protocol: B-Key and M-Key. Input: M.2 SSD Slot, both B-Key and M-Key M.2 SSD (NVMe, SATA Based). Output: USB 3.1 Type A. Dimension: 115*25*6 mm. Transfer Speed: 10Gbps/ 5Gbps (NOTE: If connect with usb 3.0 type a port, speed will be 5Gbps).
• Type: PCB Board
• HDD Count Supported: Single SSD
• Model #: M2TABD-BM

• Type: Enclosure
• Material: Aluminum
• Model #: EC-M2SA

• Color: Black
• Conversion Tray: 2 x 2.5" Drive to 3.5" Bay
• Compatible Products: 3.5"
• Model #: BK-HDCC

• Type: Hard Drive Adapter
• Color: Black
• Connector A: 1x USB 3.1 Type-A male
• Connector B: 1x 2.5in SATA III
• Model #: EC-SS31

(17)

• Type: PCI Express to M.2 Card
• Standard: SATA 3.0
• Data Transfer Rate: 6Gbps
• Model #: PM2TS6-BP

• Color: Black
• Parts: 1 Year
• Labor: 1 Year
• Model #: EC-TFPE

Limited time offer, ends 06/06

• Type: USB C to USB Adapter (2 Pack) & USB to USB C Adapter (2 Pack)
• Changer Type: USB A to C
• Connector A: 1x USB A
• Connector B: 1x USB C
• Model #: Q2252_GR_4PCS

• Type: PCI Express to M.2 Card
• Model #: PA05-HS

Limited time offer, ends 06/30

• Model #: SATA2IDE12

Limited time offer, ends 06/23

• Model #: A-E01

• Type: USB 3.0 to 2.5" SATA III Hard Drive Adapter Cable
• Color: Black
• Cable Length: 19.7"
• Changer Type: USB to SATA
• Model #: USB3S2SAT3CB

Limited time offer, ends 06/30

• Type: SATA Expansion Card
• Specifications: Converts Serial ATA to Parallel ATA Supports ATA 100/133 Fit for 3.5/2.5 SATA HDD DVD. One 40pin IDE port. One Serial ATA port. One 4pin power connector. Chipset : JM20330
• Features: SATA to IDE Adapter ("Convert SATA Hard Drive to IDE Hard Drive") Connect a SATA hard drive to you IDE motherboard with this SATA to IDE Adapter Turn your SATA hard drive into IDE interface hard drive Features the JMicro JM20330 chipset Compliant with SATA specification and supports up to 2TB hard drives
• Package Contents: 1x bridge board
• Model #: 11-001-170

Limited time offer, ends 06/07

• Type: Enclosure
• AC Adapter: Yes
• Material: abs plastic
• HDD Count Supported: Horizontal
• Model #: BL-ST62

Limited time offer, ends 06/30

• Specifications: Fits in Standard 5.25 inch Driver Bay and may not fit in chassis with customized Bay Please ensure the 5.25 inch Driver Bay of your computer is standard size before ordering this item. - 1x 3.5 - inch Drive and 1x 2.5 - inch Drive could Mounted to this ITEM at the Same Time. However Mounting only ONE drive is recommended for heat dissipation. What's in the Box 4 x Rubber Washer 8 x Mounting Screws included
• Model #: 321002

• Series: 12-120-103
• Type: USB to SATA
• Specifications: Type: USB 3.0 Type A to SATA III 6Gpbs Adapter,with UASP supportsData Rate: Support USB 3.0 5Gbps & SATA III 6Gbps
• Connector A: USB 3.0
• Model #: 12-120-103

Limited time offer, ends 06/01

• Type: USB 3.0 to SATA / IDE Combo Adapter
• Color: Black
• Changer Type: USB to IDE&SATA
• Specifications: Interface: USB 3.0 Support Devices: IDE & SATA I/II/III, SSDs, Hard Drives, CD/DVD/Blu-ray Drives Drive Size: 2.5" & 3.5" & 5.25" LED Indicators: 1 x IDE; 1 x SATA; 1 x USB; 1 x Power System Requirements: Microsoft Windows XP, Vista, 7, 8.1, 10 (32 or 64 bit) Mac OS X v10.6 and Up Linux OS USB 3.0 or 2.0 Equipped System For USB 3.0 Speeds, the System Must Support USB 3.0 Specification
• Model #: USB3-SATAIDE

• Color: Black
• Changer Type: USB to SATA
• Specifications: Bus Type: USB 3.1 Gen 2 Chipset ID: ASMedia - ASM1351 Compatible Drive Types (Type and Rate) : SATA Drive Size: 2.5in Interface USB: 3.1 Gen 2 Number of 2.5 inch bays: 1 Number of Drives: 1 Hot Swap Capability: Yes Max Drive Capacity: Currently tested with hard drives up to 2TB at 7200 RPM Maximum Data Transfer Rate: 10 Gbps Type and Rate: USB 3.1 Gen 2 - 10 Gbit/s UASP Support: Yes
• Connector A: 1x USB 3.1 Type-C male
• Model #: USB31CSAT3CB

• Model #: USB-DS12

Limited time offer, ends 06/07

• Color: Gray
• Type: USB
• Standards: USB 3.0/2.0/1.1
• Max Devices Supported: 127 USB devices, 63 FireWire devices
• Model #: BL-HUB401

Limited time offer, ends 06/07

• Series: SATA to USB 3.0 Adapter
• Part Number: BL-USBSATA
• Type: External Hard Drive Converter Cable for 2.5" 3.5" HDD, SSD
• Color: Black
• Model #: BL-USBSATA

Limited time offer, ends 06/30

• Model #: SATA3TONGFFAD

• Changer Type: SATA
• Specifications: SATA 15 Pin male to Molex 4 pin female adaptor Easy migration to SATA power Convert an existing SATA power connector to molex power connector
• Model #: SATA-FM

Limited time offer, ends 06/30

• Specifications: Converts Parallel ATA to Serial ATA Supports ATA 100/133 Fit for 3.5" IDE HDD DVD. One 40pin IDE port. One Serial ATA port. One 4pin power connector
• Package Contents: 1 x bridge board 1 x Molex power cable
• Model #: 11-001-171

• Type: PCI Express to M.2 Card
• External Ports: M.2 PCIE Key M Interface + M.2 SATA Key B Interface
• Internal Ports: PCIE X4 Interface + SATA III Interface
• Data Transfer Rate: PCIE 4.0X4/SATAIII
• Model #: PA12-HS10

• Type: USB to SATA
• Color: Black
• Cable Length: 2.5"
• Specifications: Drive Connectors 1 - SATA Data & Power Combo (7+15 pin) Receptacle Host Connectors 1 - USB 3.1 USB Type-A (9 pin; Gen 2; 10 Gbps) Male Bus Type: USB 3.1 Gen 2 Chipset ID: ASMedia - ASM1351 Compatible Drive Types (Type and Rate): SATA Drive Size: 2.5in Interface: USB 3.1 Gen 2 Number of 2.5 inch bays: 1 Number of Drives: 1 Hot Swap Capability: Yes Max Drive Capacity: Currently tested with hard drives up to 2TB at 7200 RPM Maximum Data Transfer Rate : 10 Gbps Type and Rate: USB 3.1 Gen 2 - 10 Gbit/s UASP Support: Yes
• Model #: USB312SAT3CB

Limited time offer, ends 06/30

• Model #: 11-001-257

Limited time offer, ends 06/07

• Model #: type c cable 20ft

Limited time offer, ends 06/01

• Model #: M2EX30T80-2P