Features: Connect to USB portable chargers or battery power-banks with USB 2.0/3.0 to devices with Type-C USB connector for fast charging
Fast Data transfers/sync
Reversible connector, plug and unplug easily without having to check the connector orientation
New type-C connector is capable of rapid charging devices when connected to USB wall charger.
Supported Speeds: USB 3.1(10.Gbps), USB 3.0(5Gbps), USB 2.0(480Mbps), Full(12Mbps), Low(1.5Mbps)
Can Support Typce-C supported devices such as the Nexus 6P, Nexus 5X, Macbook 12", ChromeBook Pixel, and other devices using Typce-C port.
Flexible cable, sturdy construction, and USB connectors with molded strain relief for frequent unplugging
Specifications: Chip: FT232RL + ZT213 British import best guarantee compatibility
The CONSOLE port (used for computer USB turn RJ45)
General network devices have a CONSOLE interface, this interface is used to set or more of the underlying operating equipment.
Supports USB 1.0, 1.1, and 2.0
Used for CISCO routers and switches and AP wireless router
Apply to WIN 7 32 bit, Windows 7 64 - bit, Windows XP MAC Ann table, etc
Specifications: Connect your USB3 devices to the new USB3.1 ports without having to purchase new cables. Quickly and easily connect devices to the system for greater compatibility.
Specifications: PL 2303 Chipset
Supports USB 1.0, 1.1, and 2.0
Data Transfer Rates from 300 baud to 921600 baud
Signal Indicator: Indicator lighs for Power(PWR), Send(TXD) and Receive(RXD)
Supports Windows 7/8/10/XP/Vista/2000/2003/2008/2012/ CE/Mac/Linux/Android
Drivers Included
Specifications: • Standard 2.5" IDE storage device form factor (100.2mm x 69.9mm x 9.8mm)
• LED indicators: Power On, Master and Slave Card Detect, and Disk Activity
• Can be a primary bootable device containing the OS and applications (depends on CF card specifications)
• Transparent to operating system and does not require any drivers
• Supports Microsoft Windows 2000, XP 32/64-bit, Server 2003 32/64-bit, Vista 32/64-bit, Server 2008 32/64-bit and Linux operating systems
• Power supply via IDE interface (44-pin SFF IDE connector, +5V)
IDE Interface
• 44-pin SFF (Small Form Factor) IDE connector
• Supports Ultra-DMA IDE Interface
• Does not support hot swap on the IDE interface
CF Interface
• 2 CF card slots (Master/Slave) supporting CF Type I form factor
• Supports PIO mode, DMA and Ultra-DMA mode with data transfer rate u...
Specifications: Specification:
Board size: 2.40" x 2.05" x 0.03" (W, L, T)
On-board LED indicators for power-on and compact flash access
Voltage selection for +3.3V or +5V compact flash
Master or slave mode selection
Power input: +5V, floppy disk drive power connector
Fully compatible with Compact Flash Type I, Type II, and Micro-drive
40-way (2.54mm) standard IDE connector
This adapter does NOT support hot insertion of CF cards
System Requirement:
PC or Mac with one IDE connector
MS Windows, Mac OS, Linux operating system
Specifications: This adapter connects a compact flash memory card to a 3.5” IDE host interface. Aiming at educational sectors, IT development, and the embedded technology enthusiast to enable the use of a compact flash card as an IDE hard drive.