Specifications: • Standard 2.5" IDE storage device form factor (100.2mm x 69.9mm x 9.8mm)
• LED indicators: Power On, Master and Slave Card Detect, and Disk Activity
• Can be a primary bootable device containing the OS and applications (depends on CF card specifications)
• Transparent to operating system and does not require any drivers
• Supports Microsoft Windows 2000, XP 32/64-bit, Server 2003 32/64-bit, Vista 32/64-bit, Server 2008 32/64-bit and Linux operating systems
• Power supply via IDE interface (44-pin SFF IDE connector, +5V)
IDE Interface
• 44-pin SFF (Small Form Factor) IDE connector
• Supports Ultra-DMA IDE Interface
• Does not support hot swap on the IDE interface
CF Interface
• 2 CF card slots (Master/Slave) supporting CF Type I form factor
• Supports PIO mode, DMA and Ultra-DMA mode with data transfer rate u...
Specifications: Front Panel:
- 2 USB 3.0 Ports
- Slim Optical Drive (12.7mm) Bay
- 2.5" SATA I / II / III HDD Mobile Rack
Back Panel:
- Floppy Power Connector
- SATA Data Connector
- SATA Power Connector
- Built-in USB 3.0 20-pin Header Cable (19")
USB Data Transfer Rate Up to 6Gbps
5.25" Front Bay Mount Design
Plastic Front Panel
SECC Body
NSS Connector - Trouble Free 50000 Cycles Hot Swaps
Driver-free Operation
Tool-less Installation
Package Contents: Multipurpose 5.25" Bay Adapter
Power Cable (4")
SATA Data Cable (18")
Screws
User Manaul
Specifications: This adapter connects a compact flash memory card to a 3.5” IDE host interface. Aiming at educational sectors, IT development, and the embedded technology enthusiast to enable the use of a compact flash card as an IDE hard drive.
Specifications: Adapter:
Device Support: SATA III/II/I SSD/HDD
Device Size: 2.5" SSD/HDD
SATA Interface: Standard SATA
USB Interface: USB 3.0 Type A (Backwards Compatible with USB 2.0)
HDD Capacity: Up to 2TB (Check www.vantecusa.com for any updates)
Material: Plastic
Power: USB Bus Powered
Casing:
Device Support: SATA III/II/I SSD/HDD
Device Size: 2.5", Thickness: 9.5mm
Material: Plastic
System Requirements:
Microsoft Windows XP, Vista, 7, 8.1, 10
Mac OS X v10.4 and Up
USB 3.0 or 2.0 Equipped System
For USB 3.0 Speeds, the System Must Support USB 3.0 Specification
For UASP, the OS must have Support for UASP Protocol
Package Contents: 1 x Mounting All Screws Needed, 1x 4 Pin to Dual 15 Pin SATA Power Cable 2x SATA Data Cables( 18 inch),one is straight to straight, the order is straight to 90 degree