Hard Drive Adapters

• Color: Black
• Specifications: 2.5in & 3.5in Drive Connectors 1 - SATA (7 pin; Data) Receptacle Host Connectors 1 - mSATA (52 pin; Mini SATA) Male Max Drive Capacity Currently tested with up to 4TB 7200 RPM hard drive Type and Rate SATA III (6 Gbps)
• Connector A: mSATA
• Connector B: SATA
• Model #: MSAT2SAT3

• Color: Black
• Changer Type: Compact Flash Card to IDE
• Specifications: This product does not support hot-swapping of flash cards while the PC is powered on. You must turn-off your computer to switch cards.
• Model #: 35BAYCF2IDE

• Color: Black
• Changer Type: IDE to SATA with ODD Support
• Connector A: IDE 40-Pin
• Connector B: SATA
• Model #: IDE2SAT2

• Color: Black
• Weight: 0.05
• Model #: PNL9M16

• Changer Type: SATA
• Specifications: SATA 15 Pin male to Molex 4 pin female adaptor Easy migration to SATA power Convert an existing SATA power connector to molex power connector
• Model #: SATA-FM

• Connector A: 1x USB 3.0 male
• Connector B: 1x 2.5in SATA III
• Model #: E000133-1

(166)

Limited time offer, ends 01/11

• Parts: 1 Year
• Model #: 1125SS-V1-BK-EP

(17)

Limited time offer, ends 01/11

• Type: PCI Express to M.2 Card
• Standard: SATA 3.0
• Data Transfer Rate: 6Gbps
• Model #: PM2TS6-BP

Limited time offer, ends 01/11

• Changer Type: IDE to SATA
• Specifications: NOTE: 1. The adapter need for external power adapter to work. 2. When connecting the riser need to turn off your computer. 3. IDE Hard disk / CD-ROM motherboard SATA adapter when the need to hard disk / CD-ROM set jumpers main dish.
• Connector A: 3.5" 40 pin Female IDE / PATA
• Connector B: 7+15 pin (22 pin) SATA
• Model #: 35IDE2SATA-MNDL

Limited time offer, ends 01/11

• Dimensions: 115*25*6 mm.
• Specifications: Item: M. 2 SSD to USB 3.1 Type A Adapter Board. Material: PCB Board. Protocol: B-Key and M-Key. Input: M.2 SSD Slot, both B-Key and M-Key M.2 SSD (NVMe, SATA Based). Output: USB 3.1 Type A. Dimension: 115*25*6 mm. Transfer Speed: 10Gbps/ 5Gbps (NOTE: If connect with usb 3.0 type a port, speed will be 5Gbps).
• Type: PCB Board
• HDD Count Supported: Single SSD
• Model #: M2TABD-BM

Limited time offer, ends 01/11

• Color: Black
• Conversion Tray: 1 x 2.5" Drive to 3.5" Bay
• Mobile Rack Drives Support: 1 x 2.5" Drive to 3.5" Bay
• Mobile Rack Interface: SATA I/II/III
• Model #: 25T35-2P

(45)

Limited time offer, ends 01/11

• Color: Black
• Part Number: ORICO AC325-1S-BK
• Conversion Tray: 3.5 to 1x2.5
• Mobile Rack Drives Support: 3.5 to 1x2.5
• Model #: AC325-1S-V1-BK

Limited time offer, ends 01/17

• Color: Gray
• Connector Number: 1
• Connector Detail: 1 x USB 3.0 to 1 x SATA
• Features: This SATA to USB 3.0 Adapter allows you to add driver space to you laptop by connecting to a 2.5’’ SSD or HDD. You can connect to an external drive to add storage, perform backups, create disk images, implement data recoveries, and transfer content to your laptop (Note: Not support
• Model #: Z3#Q2288_B

• Color: Black
• Specifications: Mount both PCIe (NVMe) and SATA based M.2 SSDs inside your computer using this PCI Express adapter card 3 Port M.2 SSD (NGFF) Adapter Card / 1 x PCIe (NVMe) M.2 / 2 x SATA III M.2 / PCIe 3.0 PCI Express 3.0 M.2 NGFF Card Easily expand the storage and improve the overall performance of your desktop or server Supports PCI Express 3.0 (x4) ideal for a high-performance M.2 PCIe SSD (NVMe) OS independent with no drivers required for a fast hassle-free set up Includes a low-profile bracket
• Connector A: Connector Type(s): 1 x PCI Express x4 Male
• Connector B: Internal Ports: 3 x M.2 (NGFF, B-Key) Receptacle / 2 x SATA (7 pin; Data) Plug
• Model #: PEXM2SAT32N1

• Model #: DK108

Limited time offer, ends 01/17

• Changer Type: USB to SATA
• Connector A: 1 x USB 3.0
• Connector B: 1 x SATA III
• Model #: 3#Q1170_B_US

• Color: Other
• Changer Type: 9 Pin Serial Male to 10 Pin Motherboard Header
• Specifications: Color: Gray Connector A: 1 - DB-9 (9 pin; D-Sub) Male Connector B: 1 - IDC (10 pin; Motherboard Header) Female Cable Length: 15.98 in [406 mm] *Conforms to Apex10-Everex-Intel Specification, please refer to wiring diagram on the Downloads Tab
• Weight: 0.08
• Model #: PLATE9M16

Limited time offer, ends 01/31

• Model #: INBR52512CMFAN

• Color: Black
• Cable Length: 24"
• Changer Type: USB to DB9 (RS-232)
• Specifications: Connector Types: 2 - DB-9 (9 pin; D-Sub) Male Interface: serial Number of Ports: 2 Card Type: Low / Standard Profile Max Baud Rate: 115200 bps Data Bits: 7, 8 Stop Bits: 1, 2 Parity: None, Odd, Even, Space, Mark Bus Type: Motherboard Header Internal Ports: 1 - IDC (10 pin; Motherboard Header) Female External Ports: 2 - DB-9 (9 pin; D-Sub) Male Chipset ID: FTDI FT232R Microsoft WHQL Certified: Yes Operating Temperature: -40°C to 85°C (-40°F to 185°F) Storage Temperature: -65°C to 85°C (-85°F to 185°F)
• Model #: ICUSB232INT2

Limited time offer, ends 01/17

• Color: Black
• Changer Type: SATA to USB 3.0 and USB C Adapter
• Connector A: 1 x USB 3.0
• Connector B: 1 x SATA
• Model #: Q3043_B_US

Limited time offer, ends 01/31

• Type: Power
• Color: Multi-Color
• Length: 11" - 15"
• Connector Number: 2
• Model #: SATA2IDE12

Limited time offer, ends 01/11

• Color: Black
• Cable Length: 200mm/7.9in
• Changer Type: USB C to SATA
• Weight: 29g/1oz
• Model #: WL-ST345CP

(1)

Limited time offer, ends 01/11

• Type: Enclosure
• Features: Comes with a silicone protective case and lanyard for enhanced SSD protection and portability. Features an aluminum alloy shell with a multi-stacked heat dissipation design for effective cooling. Supports a 10Gbps transmission rate for fast and reliable data transfer. Dual protocol support for NVME+NGFF, catering to various storage requirements. Fully compatible with Windows, Mac
• Dimensions: 137*45.8*17.8MM
• Model #: AXM2-G2-GY-BP

(249)

Limited time offer, ends 01/11

• Material: Classic Plastic
• Dimensions: 5.51" x 4.72" x 2.95"
• Type: Dock
• HDD Count Supported: Dual HDD
• Model #: WL-ST334U-Red-US

• Color: Red
• Specifications: Connect a PCIe M.2 SSD (NVMe or AHCI) to your computer through PCI Express for ultra-fast data access x4 PCI Express to M.2 PCIe SSD Adapter M.2 NGFF SSD (NVMe or AHCI) Adapter Card x4 PCIe expansion card Expansion bay adapter supports M key M.2 NGFF PCIe SSD Add a high speed 4-lane M.2 NGFF SSD such as Samsung 950 Pro or Samsung SM 951 to your PC Wide compatibility with M.2 SSDs (NVMe and AHCI): 110mm, 80mm, 60mm and 42mm OS independent for fast and easy set-up
• Connector A: 1 x M.2 (NGFF, M-Key, PCIe x4)
• Connector B: 1 x PCI Express x4 Male
• Model #: PEX4M2E1

Limited time offer, ends 01/31

• Model #: 2X25TO35MA

Limited time offer, ends 01/11

• Type: NVME to PCIe 4.0
• Model #: 4NV2PCE16X-PRO

Limited time offer, ends 01/17

• Changer Type: SATA/IDE to USB 3.0
• Dimensions: 3.64 x 3.07 x 0.75 inches
• Weight: 120g
• Package Quantity: 1
• Model #: Z1#Q2315_B_US

Limited time offer, ends 01/31

• Model #: SATA3TONGFFAD

• Model #: N2-M2-SSD-DUPLICATOR

• Model #: CNS8J-00-B07Z1-1

(7)

• Type: N/A
• Model #: 1125SS-V1-BK-BP

Limited time offer, ends 01/31

• Specifications: Converts Parallel ATA to Serial ATA Supports ATA 100/133 Fit for 3.5" IDE HDD DVD. One 40pin IDE port. One Serial ATA port. One 4pin power connector
• Package Contents: 1 x bridge board 1 x Molex power cable
• Model #: 11-001-171

Limited time offer, ends 01/31

• Model #: IDE2SATA

Limited time offer, ends 01/11

• Type: NVMe to SATA3.0
• Model #: NVTS6P+6C

Limited time offer, ends 01/31

• Model #: 11-001-257