Specifications: This adapter connects a compact flash memory card to a 3.5” IDE host interface. Aiming at educational sectors, IT development, and the embedded technology enthusiast to enable the use of a compact flash card as an IDE hard drive.
Specifications: Jmicro JM20330 Chipset
Plug & Play and Hot-swapping capability
Automatic SATA 3.0/1.5 Gbps speed negotiation
Serial-ATA 1.0 specification compliant
ATA/ATAPI Ultra DMA of transfer rate 16.7, 25, 33, 48, 66, 100, 133 and 150Mbps
Support ATA PIO and UDMA modes 0 to 4
Support 3.5" IDE hard drives and 5.25" optical drives
Ultra low power consumption
Master/Slave mode support
Support Windows 98SE/ME/2000/XP Operating System
Package Contents: SATA to ATA/ATAPI IDE Interface Adaptor
SATA Cable
Power Cable
Changer Type: Product Type: RocketPort Universal PCI Quad DB9 Multiport Serial Adapter
Host Interface: Universal PCI
Data Transfer Rate: Up to 460.80 Kbps
Ports Expandability: 4 x 9-pin DB-9 Male RS-232 - Serial, Via Cable (Optional)
Specifications: Product Type: RocketPort EXPRESS Quadcable DB9 Multiport Serial Adapter
Host Interface: PCI Express x1
Data Transfer Rate: Up to 921 Kbps
Ports Expandability: 4 x 9-pin DB-9 Male RS-232/422/485 - Serial, Via Cable (Included)
Specifications: Specification:
Board size: 2.40" x 2.05" x 0.03" (W, L, T)
On-board LED indicators for power-on and compact flash access
Voltage selection for +3.3V or +5V compact flash
Master or slave mode selection
Power input: +5V, floppy disk drive power connector
Fully compatible with Compact Flash Type I, Type II, and Micro-drive
40-way (2.54mm) standard IDE connector
This adapter does NOT support hot insertion of CF cards
System Requirement:
PC or Mac with one IDE connector
MS Windows, Mac OS, Linux operating system