Specifications: NEW 60M HDMI KVM Over Network Extender 4K 60Hz HDMI Transmitter by RJ45 CAT5e CAT6 Extensor Support KVM remote control
Video
Standards: HDMI 2.0; HDCP 2.2 and DVI compliant
Maximum pixel clock: 300MHz
Maximum data rate: 18Gbps
Resolution: 3840 x 2160@60Hz
Connector: HDMI-A
Impedance: 100O
?
Package Contents: HDMI KVM extender transmitter x1
HDMI KVM extender receiver x1
Power adapter x1
User manual x1
Specifications: NEW 60M HDMI KVM Over Network Extender 4K 60Hz HDMI Transmitter by RJ45 CAT5e CAT6 Extensor Support KVM remote control
Video
Standards: HDMI 2.0; HDCP 2.2 and DVI compliant
Maximum pixel clock: 300MHz
Maximum data rate: 18Gbps
Resolution: 3840 x 2160@60Hz
Connector: HDMI-A
Impedance: 100O
?
Package Contents: HDMI KVM extender transmitter x1
HDMI KVM extender receiver x1
Power adapter x1
User manual x1
Specifications: Interfaces
Relay
8 normally open relays (8 x 2-pole terminal block)
Contact Rating: Max 24 VDC, 2A
Ethernet
1 x RJ-45 Female, 10/100Base-T
Supported Protocol: ICMP, TCP/IP, DHCP, HTTPS, SSH
DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds:
IP: 192.168.0.60
Subnet Mask: 255.255.255.0
Switches
Controller ID: 1 x 16-segment Switch
Expander ID: 1 x 8-segment Switch
Reset Button: 1 x Semi-recessed Pushbutton
USB: 1 x USB Type A (Firmware upgrade only)
Power
Consumption 5 VDC, 10 W (Adapter); 48 VDC, 13 W (PoE, PoE 802.3 AF/AT compatibility)
Output 12 VDC, 300 mA