DIY Cooling

Limited time offer, ends 10/30

• Model #: 11-001-061

(1)

• Part Number: 90RC00V0-M0AAY0
• Type: Water Blocks
• Block Compatibility: AMD Socket AM4 / AMD Socket AM5 / Intel LGA 1150 / Intel LGA 1151 / Intel LGA 1155 / Intel LGA 1156 / Intel LGA 1200 / Intel LGA 1700
• Block Dim.: 89 x 89 x 101mm
• Model #: ROG RYUJIN III WB

• Type: CPU Block
• Model #: 1023311

Limited time offer, ends 10/30

• Model #: 11-001-195

• Type: CPU Block
• Model #: PFLEXA10-58-BK

• Type: Fittings
• Model #: BP-MVVFRGIG14-TBBK

• Used For: Consumer
• HeatSink: with HeatSink
• Height: 3.1"
• Width: 1.0"
• Model #: SB-HTSK

• Model #: 1-Water-Cooling0785

Limited time offer, ends 10/30

• Model #: 11-001-289

• Type: CPU Block
• Model #: PC-ICE2-BR

• Type: Accessories
• Model #: 4251312607104

• Model #: 652843973241

Limited time offer, ends 10/30

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: 10 pcs of 8.8x8.8x5mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface. The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface Excellent adhesive performance with good wetting and flow onto many substrate surfaces....
• Model #: 11-001-393

Limited time offer, ends 10/30

• Color: silver
• Compatibility: CPU
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Tested to fit the Raspberry Pi CPU / SoC; Reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and grease. -Peel the protective liner off on the base of the heatsink. -Apply the heatsi...
• Model #: 11-001-255(10)

• Type: Heatsink
• Block Compatibility: 2280 M.2 SSD
• Block Material: Aluminum
• Radiator Size: 22x70x6mm
• Model #: HS22x70x6

• Model #: 356571540330

• Model #: 1-Com-Cooler3089

Limited time offer, ends 10/15

• Model #: C745-LUOYIMAN-Lsy817-1237

• Model #: 80-Water-Cooling0305

• Brand: Watercool
• Model: WAT-0487
• Part Number: WAT-0487
• Color: Black
• Model #: WAT-0487

• Type: Coolant
• Model #: LIQ-702YL-B

• Model #: 1-Water-Cooling0397

• Type: CPU Block
• Model #: PC-BASE128

• Model #: 322002894136

• Type: CPU Block
• Model #: PC-BASE232-EUB

• Type: CPU Block
• Model #: B-RAM-D4-X-V2

Limited time offer, ends 10/07

• Model #: 80-Water-Cooling1453

• Brand: Thermal Grizzly
• Model: TG-DM-FIT-0004
• Part Number: TG-DM-FIT-0004
• Color: Black
• Model #: TG-DM-FIT-0004

• Model #: 994255167710

• Type: Coolant
• Model #: LIQ-702CL-B

• Type: Liquid Cooling System
• Model #: 29886

• Model #: 886801204447

Limited time offer, ends 10/07

• Model #: 27-Com-Cooler0768

• Model #: 508922836719

Limited time offer, ends 10/30

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: 5 pcs of 14x14x6mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface. The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface Excellent adhesive performance with good wetting and flow onto many substrate surfaces. Th...
• Model #: 11-001-395

Limited time offer, ends 10/30

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. Size is 20mm x 20mm x6mm,Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 20mm x 20mm x 6mm 3M 9448A Heat-conductive adhesive tape is included Package Content: 10 x Heatsink
• Dim...
• Model #: 11-001-060