DIY Cooling

Limited time offer, ends 07/31

• Model #: 11-001-362-6CM

• Type: Radiator
• Radiator Size: 397 x 124 x 46mm
• Radiator Material: Copper
• Fan Size: 120mm
• Model #: 14166

Limited time offer, ends 07/31

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Aluminum Heat-Sink, For Package TO-220 / TO-3P / TO-247 Rectifier, Transistor or Regulator IC. Quantity: a lot of 10 Pieces. M3 Screw Hole. Size: 25 x 15x 10mm / 0.98" x 0.6" x 0.4"(L*W*H) Color : Silver Tone Weight: 4g/ piece Please check the specification table and make sure that the size of the heatsink fits that of your component
• Dimensions: 25 x 15x 10mm
• Model #: 11-001-065

• Type: Fittings
• Model #: CL-W038-CU00BL-A

• Model #: BPTA-PFANMFH

Limited time offer, ends 07/31

• Model #: 11-001-360

• Model #: 14810

• Type: Fittings
• Model #: BP-DWETAIR

Limited time offer, ends 07/31

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: 10 pcs of 11x11x5mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface. The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface Excellent adhesive performance with good wetting and flow onto many substrate surfaces. T...
• Model #: 11-001-394

Limited time offer, ends 07/31

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: 5 pcs of 14x14x6mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface. The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface Excellent adhesive performance with good wetting and flow onto many substrate surfaces. Th...
• Model #: 11-001-395

• Type: Fittings
• Model #: CL-W033-CA00BL-A

(25)

• Type: Distro-Plate with Pump Combo
• Pump Dim.: 360 (L) x 120 (W) x 84.8 (H) mm
• Reservoir Capacity: 200 ml
• Specification: Dimension: 360mm(L) x 120mm (W) x 84.8mm (H) Material: PMMA Capacity: 200ml Maximum Flow Rate: 1135 L/h Maximum Pressure: 50 pSI Input Voltage: 12V / 5V Power Input: 37W / 3.5W Connector: 4-pin Peripheral Port Thread: G 1/4" Pump Speeds: 1800 RPM/2550 RPM/3300 RPM/4050 RPM/4800 RPM
• Model #: CL-W263-PL00SW-A

• Model #: 14932

• Model #: 14923

Limited time offer, ends 07/31

• Model #: 11-001-016

• Type: Fittings
• Features: Dimension: ?22 x 25 (H) (mm) Applicable: G 1/4 Weight: 47 g Material: CU Screw Thread: G 1/4 Note: Female to Male
• Model #: CL-W046-CU00SL-A

• Type: Fittings
• Features: Dimension: ?22 x 30 (H) (mm) Applicable: G 1/4 Weight: 63 g Material: CU Screw Thread: G 1/4 Note: Female to Female
• Model #: CL-W050-CU00BL-A

Limited time offer, ends 07/31

• Model #: 11-001-013

(2)

• Type: Fittings
• Model #: BP-ACET

Limited time offer, ends 07/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Anodized Black Aluminum fin heatsink cooling , generally used in heat treatment and the cooling IC and electronic component, for example: RAM, CPU Memory , GPU, Graphics Card, Vidoe Card,also can be used for cooling of , northbridge ,Southbridge ,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,1W LED etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 28mm x 28mm x 11mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 28 x 28 x 11mm/1.10" x 1.10"x 0.43"(L*W*H) Weight: 5...
• Model #: 11-001-329

• Model #: BPN-RL2422ML

• Type: Fittings
• Model #: BP-TBWP-C95

• Model #: BP-BSWP-C06V2

• Type: Fittings
• Model #: BP-DWWP-C06V2

Limited time offer, ends 07/31

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc Purchase different thickness copper thermal pad you purpose one-step,default combination: 1 piece - 0.1mm 1 piece - 0.3mm 1 piece - 0.4mm 2 pieces - 0.5mm 1 piece - 0.6mm 2 pieces - 0.8mm 1 piece - 1.0mm 1 piece - 1.2mm
• Dimensions: 15x15mm
• Model #: CU-PAD-KIT

• Model #: 1026192

• Model #: BP-TBWP-C06-4P

• Model #: BP-TBDWP-DC06

• Type: Coolant
• Color: Ice Blue
• Coolant Capacity: 50 ml
• Model #: CL-W163-OS00IB-A

Limited time offer, ends 07/31

• Model #: 11-001-323

• Model #: BPTA-ORFT16

• Model #: BPM-ENCLP-EVO

• Model #:

• Model #: BP-TBRG

• Model #: BP-HTSB12CL-1M-1

• Model #: BP-TBC4-BK