Specifications: Physical
- Measurement: 8.3 in x 3.2 in x 2.6 in (211 mm x 81 mm x 66 mm) (without belt)
- Weight: 1.16 lb (0.53 kg) (without belt clip)
- Water resistance: The test set is rain and moisture resistant and IP64 rated
Specifications: Technical detailsColour of productYellowWeight & dimensionsWeight10.8 oz (307g)Dimensions (WxDxH)2.37 x 8.74 x 3.37" (60.3 x 222 x 85.7 mm)Operational conditionsOperating relative humidity (H-H)10 - 80%
Specifications: Test Services:
Line Voltage Test
Loop Current Test
Display Screen: LCD
Status Indicators: Low battery Warning Indicator
Batteries: Alkaline Battery
Additional Information:
Water Resistance : Designed to be rain and moisture resistant
Drop Test : Passes 20 foot drop test
Dimensions: 10" Height x 3.75" Width x 4.25" Depth
Weight (Approximate): < 1.50 lb - with one belt clip
Specifications: Loop Limit: 2.4 kOmaximum at 48 VDC (nominal 15 mA minimum loopcurrent)
DC Resistance (Talk Mode): 150 Otypical at 80 mA current
AC Impedance (Monitor Mode):
Low impedance (Ring position) 600 Oat 1 KHz typical
High impedance (HI Z position) 100 kOminimum at 1 KHz
Rotary Dial Output: 10 pps .5 pps
Pulsing Rate: 60 % ± 2 %
Percent Break: 800 ms typical
Interdigit Interval Leakage During Break: > 50 kO
DTMF Output: ±1 % maximum
Tone Frequency Error Level per Tone Pair: dBm maximum, - dBm minimum
High versus Low Tone Difference: 4 dB maximum
Temperature:
Operating: -5 degree C to degree C
Storage: -40 degree C to degree C
Drop: 1 meter, 4 times
Altitude: To 3,000 meters (10,000 feet) maximum
Relative Humidity: 10 %to 80 % (non-condensing)
Specifications: Essential Tools for Cable Installers or Telecom/LAN Personnel
Tests Cat5, Cat6, Cat6a and telephone cable assemblies
Cable tester combines main tester unit and removable remote tester unit
Identifies connection, no connection, short circuit or open circuit
Tests multiple types: RJ11, RJ12, RJ45
Fast and slow LED flashing modes during automatic testing
Designed to Make Your Work Easier
Includes cable tester, crimping tool, LSA punchdown tool and stripper tool
Stores away in convenient carrying case
Side A - Connector 1: RJ45 (FEMALE)
Side B - Connector 1: RJ45 (FEMALE)
Specifications: Test Services:
Fault Display
High Speed Testing
Generation of two tones for tracing cables and locating hidden cables
Length Measurement:
15.75" to 656 ft Twisted Pair
Ports: 1 x RJ-45
Status Indicators:
5 green LEDs for pairs and shield display
6 red LEDs (TONER, SHORT, REVERSED, MISWIRE, SPLIT PAIRS, and LOW BATTERY)
Batteries: Alkaline AAA
Features
Features
Auto-sleep mode
Generation of two tones for tracing cables and lication hidden cables
Packaging
Package Contents
MicroMapper MT-8200-49A Network Testing Device
MicroMapper Remote
Patch Cable
6-Volt Alkaline Battery
User Guide
The MicroMapper quickly and easily tests twisted pair cabling, giving you visibility of opens, shorts, crossed, reversed and split pairs. Just push the TEST button and MicroMapper will automatically scan all wire pairs for any existing faults...