Thermal Compound / Grease

• Volume / Net Weight: 5.0g
• Thermal Conductivity: 11.0 W/mK
• Long Term Operating Temperature: -150 to 130 C
• Specifications: Kryonaut uses a special structure, which halts the drying out process at temperatures of up to 80° Celsius. This structure is also responsible for the nano-aluminum- and zinc-oxide-parts included in the grease to compound optimally, to compensate for unevenness of the component (i.e. the CPU) or the heat sink, thus guaranteeing remarkable heat transfer.
• Model #: TG-K-015-R

• Model #: ACTCP00053A

• Volume / Net Weight: 12g
• Long Term Operating Temperature: -50 to 130 C
• Specifications: Average Particle Size: <0.49 micron <0.000020 inch Extended Temperature Limits: Peak: -50 Degrees C to >180 Degrees C Long-Term: -50 Degrees C to 130 Degrees C Performance: 3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core. Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches.
• Model #: AS5-12G

• Model #: DRG-U6 PRO-10g

• Model #: NT-H1 3.5g SW Edition

• Model #: CE 001

• Model #: NT-H2 3.5g AM5 Edition

• Model #: ACE-6G

• Volume / Net Weight: 10g
• Thermal Conductivity: 14.8W/mk
• Long Term Operating Temperature: -55 to 200 C
• Model #: DR-UTP-8-10G

• Volume / Net Weight: 20g
• Thermal Conductivity: 17.5 W/mK
• Long Term Operating Temperature: -50 to 250 C
• Specifications: TG-30 adopts an improved nanocarbon tube composite formula with a thermal conductivity of 17.5W/mK (measured value), which can quickly reduce the temperature difference between CPU/GPU cores and meet the cooling needs of mainstream gaming consoles, high-performance graphics cards, and workstations. Its non-conductive properties completely avoid the risk of short circuit,
• Model #: coxbyte26

• Volume / Net Weight: 20g
• Long Term Operating Temperature: -50 to 200 C
• Model #: DRG-UX-20g

• Model #: TG-3XKE002

• Model #: BB-Grease

• Specifications: Material Specification: Al 70~88(wt%) ZnO 18~34(wt%) Oil 8~12(wt%) Antioxidant 0.5~2(wt%) Adhesiveness: 330000Cps Thermal Conductivity: 11.2 W/m - Degree C Thermal Impedance (Resistance): 0.013 Degree C-in2/W Included: One syringe of thermal compound and one easy-to-spread card. Specific Gravity: 2.7g/cm3
• Model #: PRO-PK3-1.5G

• Model #: ACTCP00033A

Limited time offer, ends 06/07

• Features: EXCELLENT THERMAL CONDUCTIVITY：Thermal conductivity 1.93 W/m-k. It ensures that the heat generated by the CPU or GPU is effectively dissipated.and subsequently excellent temperature reduction performance HIGH DURABILITY: Low thermal resistance can keep mushy for a long time. Wide operating temperature range, stable performance under -30℃-280℃ environment. High heat dissipation performance, high-cost
• Model #: BL-HY510X2

• Model #: STC 7

• Model #: C-001 Combo

• Model #: ACN-60ML

• Thermal Conductivity: 8.0 W/mK
• Long Term Operating Temperature: -100 °C to +250 °C
• Model #: TG-MP8-100-100-15 1R

• Volume / Net Weight: 2 x 30ml
• Specifications: Package Specs: 60ml Kit (2 fluid ounces) - 30ml ArctiClean 1 and 30ml ArctiClean 2.
• Model #: ACN-60ML (2-PC-SET)

• Model #: TG-MP8-100-100-10-1R

• Model #: ACTPD00053A

• Model #: kasia0001

• Model #: ACTPD00056A

Limited time offer, ends 06/07

• Thermal Conductivity: 8.5 W/mK
• Features: PTM7950 is a highly thermally conductive Phase Change Material (PCM) that lasts longer and is more effective than tradiational thermal paste. Size 31x50x0.2mm, Phase change at 45°C, Thermal Conductivity: 8.5 W/m.K, It is normal for it to melt at high temperatures.It achieves good heat dissipation performance through repeated melting and solidification.
• Parts: 3 Years
• Model #: BL-DRGJ-3150

• Volume / Net Weight: 3ml / 7.8g
• Thermal Conductivity: 11.8 W/mk
• Long Term Operating Temperature: -200 °C / +350 °C
• Specifications: The Hydronaut thermal grease delivers optimal heat transfer capabilities for larger-scale cooling solutions like water cooling systems. Hydronaut thermal grease consists of a silicon-free structure. The makes it very light and highly flexible and easy to apply. Hydronaut achieves best results if used on medium- to large-scale cooling solutions. This product is ROHS-compliant for demanding users.
• Model #: TG-H-030-R

(3)

• Volume / Net Weight: 4.0g
• Thermal Conductivity: 4.5 W/mK
• Long Term Operating Temperature: -50 to 200 C
• Specifications: Viscosity: 76 Pa-s Dimensions: 7.05" (L) x 3.5" (W) x 0.59" (H) Weight: 4 g Shelf Life: 24 months Color: Grey
• Model #: CL-O023-GROSGM-A

• Volume / Net Weight: 7.0g
• Model #: TX-1

• Brand: coxbyte
• Series: TG
• Volume / Net Weight: 2g
• Thermal Conductivity: 13.8 W/mK
• Model #: Coxbyte27

• Model #: TG-P-B-030

• Model #: TG-AS-P-3

• Volume / Net Weight: 1.0g
• Thermal Conductivity: >3.05W/m.k,
• Long Term Operating Temperature: -50/180°c
• Model #: PST-1G-GLD-B

• Type: CPU Block
• Model #: TG-KE-090-R

• Model #: U6_10gSR

• Volume / Net Weight: 1.5ml/3.9 g
• Thermal Conductivity: 8.5 W/mK
• Long Term Operating Temperature: -150 °C / +200 °C
• Specifications: Even though the amount of metallic elements in Aeronauts formula is lower in comparison to our other products, it still provides reliable and perfomant thermal conductivity. In our lab tests, Aeronaut showed a high amount of wear resistance under high temperatures, and acts also surface-protecting. The removal of Aeronaut thermal grease causes far less micro scratches on the components surface compared to other products.
• Model #: TG-A-015-R