Drive Compatibility: • 12 x 3.5 or 2.5" SATA HDD/SDD (drives not included)
• Synology only guarantees full functionality, reliability, and performance for Synology drives listed on the compatibility list.
The use of non-validated components may limit certain functionality and result in data loss and system instability
Power: AC input power voltage : 100 V to 240 V AC
Temperature: • Operating Temperature: 0°C to 35°C (32°F to 95°F)
• Storage Temperature: -20°C to 60°C (-5°F to 140°F)
Humidity: • Operating Relative humidity: 8% to 80% RH Storage environment
• Storage Relative humidity: 5% to 95% RH
Specifications: Controller: ASPEED AST2500
Feature: Base Board Management Controller (IPMI2.0 with iKVM support)
VGA (1920x1200@60Hz 32bpp)
Memory: 2 SPI flash ROM 32MB
1 DDR4 SDRAM 4Gb
Physical Status
Form Factor: Low profile PCIe add-in-card
Dimensions: 168.45 x 68.9 mm
I/O
Upstream interface: PCI Express2.0 x1
External: 1 RJ45 via Realtek RTL8211E for dedicated IPMI LAN (10/100/1000 Mbps), 1 DB-15 (VGA)
Internal connectors: 2 SMBus header
1 x PMBus header
1 x IPMB header
1 x BMC reset
1 x BMC debug header
1 x V BIOS or system BIOS ROM
2 x BMC ROM
1 x Dual ROM select header
1 x TPM (13-pin, LPC)
1 x LPC header (13-pin)
2 x Fan header
1 x USB2.0 (5-pin): KVM and standby power
1 x header (18-pin): GPIO, NCSI
1 x header (18-pin): case open, system fail, GPIO, SMBus, PECI, voltage monitoring
1 x COM port (9-pin)
1 x micro-SD connector
1 x ...