Home Audio & Home Theater

Limited time offer, ends 08/24

• Model #: 172193397806

• Model #: MPN-MZL-P09-10W-3SPD-WN

• Model #: MZL-T01-BT10W

• Model #: MPN-MZL-P01-10W-30RPM

• Model #: 9391048910118

• Model #: 9391048891073

• Brand: Victor Audio
• Series: Fremont
• Model: Fremont
• Part Number: VWRP-6000-MH
• Model #: VWRP-6000-MH

• Brand: Audio-Technica
• Series: AT
• Part Number: AT-LP120XBT-USB-BK
• Type: MI - Turntables & Cartridges
• Model #: AT-LP120XBT-USBBK

• Brand: Audio-Technica
• Color: Orange/Black
• Accessory Type: Cartridges & Needles
• Specification: Frequency Response: 20 to 25,000 Hz Channel Separation: 25 dB (1 kHz) Vertical Tracking Angle: 20° Tracking Force: 1.8 to 2.2 g (2.0 g standard) Stylus Construction: Nude elliptical Recommended Load Impedance: 47 k ohms Coil Impedance: 3.2 k ohms (1 kHz) DC Resistance: 750 ohms Coil Inductance: 480 mH (1 kHz) Output Voltage: 3.2 mV (1 kHz, 5 cm/sec.) Output Balance: 1.5 dB (1 kHz) Cantilever: Aluminum pipe Static Compliance: 23 x 10-6 cm/dyne Dynamic Compliance: 7 x 10-6 cm/dyne (100 Hz)
• Model #: AT615A

• Brand: Audio-Technica
• Color: Black
• Feature: Universal 1/2"-mount headshell for 4-pin turntable cartridges Ultra-lightweight aluminum die-cast body keeps vibration to the bare minimum Finger lift enables precise stylus placement Equipped with color-coded lead wires Includes mounting screws
• Model #: AT-HS6BK

• Accessory Type: Other
• Specification: Channel Separation: 20 (dB at 1 kHz) Vertical Tracking Force: 2.0-4.0 g (3.0 g standard) Stylus Construction: Bonded round shank Recommended Load Impedance: 47,000 ohms Output: 5.5 mV (1 kHz, 5 cm/sec.) Channel Balance: 2.0 dB (1 kHz) Stylus Shape: 0.3 x 0.7 mil elliptical Cantilever: Carbon fiber-reinforced ABS Mount: Half-inch Replacement Stylus: ATN-XP5 Coil impedance: 6.7 k ohms (1 kHz) DC resistance: 990 ohms Recommended load capacitance: 100 to 200 pF Coil inductance: 1.0 H (1 kHz) Vertical tracking angle: 20 degree
• Frequency Response: 20-18,000 Hz
• Dimension: 0.68" x 0.67" x 1.20"
• Model #: ATXP5

• Series: MusicCast VINYL 500
• Type: Turntable
• Color: White
• Inputs: Network Section File Format: MP3 / WMA / MPEG-4 AAC: up to 48 kHz / 16-bit, ALAC: up to 96 kHz / 24-bit, FLAC / WAV / AIFF: up to 192 kHz / 24-bit, DSD: up to 11.2 MHz Ethernet: Yes Wi-Fi: Yes (2.4 / 5 GHz) AirPlay: Yes Bluetooth Section Version/Profile: Ver. 4.2 / A2DP, AVRCP Audio Codec: SBC, AAC Maximum Communication Range: 10 m / 32.8 ft. 10 in. (without interferene) Turntable Drive Method: Belt drive Motor: DC motor Wow And Flutter: 0.2% Platter: Aluminium die-cast (Diameter 30 cm) Output Level: 450 mV (-7 dBV, with RIAA EQ, 1 kHz, 3.54 cm / sec), 2.5 mV ± 3 dBV (without RIAA EQ, 1 kHz, 3.54 cm / sec) Signal To Noise Ratio: 67 dB or higher (A-weighted, 20 kHz, LPF) Tonearm Tonearm: Static balance straight tonearm Effective Arm Length: 223.5 mm Overhang: 19 mm Stylus Pr...
• Model #: TT-N503WH

Limited time offer, ends 08/28

• Model #: 342308423090

OUT OF STOCK

• Brand: Audio-Technica
• Part Number: AT-VMN95C
• Type: AT-VMN95C
• Color: Blue
• Model #: AT-VMN95C

OUT OF STOCK

• Model #: ATN-XP3

OUT OF STOCK

• Accessory Type: Other
• Weight: 0.04
• Model #: ATN-XP7

OUT OF STOCK

• Model #: ATN85EP

OUT OF STOCK

• Model #: ATN81CP

OUT OF STOCK

• Model #: AT-VM740XML/H

OUT OF STOCK

• Part Number: VM510CB
• Type: Turntable
• Accessory Type: Cartridges & Needles
• Specification: Vertical Tracking Angle: 23 degrees Coil Impedance: 2,700 ohms (1 kHz) DC Resistance: 800 ohms Load Capacitance: 100-200 pF Coil Inductance: 460 mH (1 kHz) Static Compliance: 35 x 10-6 cm/dyne Dynamic Compliance: 8 x 10-6 cm/dyne (100 Hz) Vertical Tracking Force: 1.8-2.2 g (2.0 g standard) Stylus Construction: Bonded round shank Recommended Load Impedance: 47,000 ohms Stylus Shape: 0.6 mil conical
• Model #: VM510CB

OUT OF STOCK

• Accessory Type: Other
• Specification: Channel Separation: 22 (dB at 1 kHz) Vertical Tracking Force: 2.0-4.0 g (3.0 g standard) Stylus Construction: Bonded round shank Recommended Load Impedance: 47,000 ohms Output: 6.0 mV (1 kHz, 5 cm/sec.) Channel Balance: 2.0 dB (1 kHz) Stylus Shape: 0.3 x 0.7 mil elliptical Cantilever: Aluminum tapered pipe Mount: Half-inch Replacement Stylus: ATN-XP7 Coil impedance: 6.7 k ohms (1 kHz) DC resistance: 990 ohms Recommended load capacitance: 100 to 200 pF Coil inductance: 1.0 H (1 kHz) Vertical tracking angle: 20 degree
• Frequency Response: 20-20,000 Hz
• Dimension: 0.68" x 0.67" x 1.20"
• Model #: ATXP7