Wired & Wireless Accessories

• Type: PoE Injector
• Specifications: Interface: Input Port: 1 x RJ45 STP Data In Output Port: 1 x RJ45 STP PoE (Data + Power) Out Input power terminal block: 1 Network Cable: Twisted-pair cable up to 100 meters (328 ft.) 10BASE-T: 4-pair UTP Cat. 3, 4, 5, 5e, 6 100BASE-TX: 4-pair UTP Cat. 5, 5e, 6 1000BASE-T: 4-pair UTP Cat. 5e, 6 Data Rate: 10/100/1000 Mbps Dimensions: 1.26" x 5.31" x 3.46" Weight: 1.04 lbs. Power Requirements: DC 12~48V, 5A max. Unit Output Voltage: DC 54V Power Consumption: 120 watts max. Standards Compliance: IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3bt 4-pair Power over Ethernet Type 4 IEEE 802.3at Power over Ethernet Plus Package Contents: IPOE-171-95W User's manual Wall-mount kit Dust cap
• Model #: IPOE-171-95W

• Type: Adapter
• Color: White
• Specifications: Bus Type: USB 3.1 Gen 1 Chipset ID: Realtek RTL8153 VLI VL817 Industry Standards: IEEE 802.3i (10BASE-T) IEEE 802.3u (100BASE-T) IEEE 802.3ab (1000BASE-T) IEEE 802.1q (VLAN Tagging) Interface: RJ45 (Gigabit Ethernet) Ports: 1 USB Pass-Through: Yes : Auto MDIX: Yes Compatible Networks: 10/100/1000 Mbps Full Duplex Support: Yes Jumbo Frame Support: 9K max. Maximum Data Transfer Rate: 5 Gbps (USB 3.1 Gen 1) Promiscuous Mode: Yes
• Model #: US1GC301AUW

• Device Type: Converter
• Standards: IEEE 802.3, 10Base-T IEEE 802.3u, 100Base-TX IEEE 802.3ab, 1000Base-T IEEE 802.3z, 1000Base-SX/LX
• Ports: 1 x 10/100/1000Base-T port 1 x 1000Base-SX/LX port
• LEDs: PWR TP LINK / ACT, 1000 Fiber LINK / ACT
• Model #: GT-805A

• Type: Consumer Electronics
• Color: Grey
• Model #: EP-54V-150W-AC

Limited time offer, ends 09/12

• Type: Switches
• Model #: TPE-315GI

• Type: PoE Extender
• Color: Black
• Specifications: Ethernet Interface: LRP-101CH Copper: 10/100BASE-TX RJ45, auto-negotiation / auto-MDI/MDI-X Power over Ethernet Standard: IEEE 802.3at/af PoE PD (Powered Device) PoE Input: Supports both Mid-span and End-span PSE Input Range: 48~56V DC Data Rate: 100/100 Mbps Cabling: Cat5e or above Maximum Distance: 100 meters Maximum Frame Size: 1522 bytes LRP-101CE Copper: 10/100BASE-TX RJ45, Auto-negotiation / auto-MDI/MDI-X Power over Ethernet Standard: IEEE 802.3at/af PoE PSE (Power Source Equipment) PoE Output: 56V DC, 600mA max. PoE Budget: Up to 25 watts PoE Mode: End-span, RJ45 Pin 1/2 (+), 3/6 (-) Data Rate: 100/100 Mbps Cabling: Cat5e or above Maximum Distance: 100 meters Maximum Frame Size: 1522 bytes LED Indicators: LRP-101CH 4 x LEDs PWR LRP LNK PoE IN LNK / ACT LRP-101CE 4 x LEDs PWR LRP LNK PoE-in-us...
• Model #: LRP-101C-KIT

• Type: Device Servers
• Color: Black
• Specifications: Data/Stop Bit: - 2 Stop Bit2 - 8 Data Bit8 Flow Control: - XON/XOFF - RTS/CTS Interfaces/Ports: - 1 x RJ-45 Data Transfer Rate: - 10 Mbps Ethernet - 100 Mbps Fast Ethernet - 300 Kbps to 230 Kbps Serial Management: -Lantronix DeviceInstaller GUI - Serial login - SNMP - Telnet login - HTTP Protocols: - ARP - UDP - TCP - ICMP - TFTP - Auto-IP - HTTP Standard Memory: - 256 KB SRAM - 2 MB Flash Memory Status Indicators: - Power, 10/100 Link/Activity (green) - 100/100 Link/Activity (green) - Diagnostics (red) - Status (green) Input Voltage: - 9 V DC to 30 V DC Power Consumption: - 1.50 W Maximum For more information, please visit the official website.
• Parts: 1 year limited
• Model #: UD11000P0-01

(1)

• Model #: 10099

• Type: Hardware Controller
• Color: Black
• Specifications: Interface: 2 x 10/100/1000 Mbps Ethernet Ports, 1 x USB 3.0 Port Power Supply: 100-240 V~50/60 Hz, 0.6 A Dimensions: 11.60" x 7.10" x 1.70" Operating Temperature: 0-50 °C (32 - 122 °F) Storage Temperature: -40-70 °C (-40 - 158 °F) Operating Humidity: 10-90% RH non-condensing Storage Humidity: 5-90% RH non-condensing Package Cotent: - Omada Hardware Controller OC300 - Quick Installation Guide - Ethernet Cable - Power Cord - Rackmount Kit
• Model #: OC300

• Type: PoE Injector
• Specifications: Interface: "Data" Input Port: 1 x RJ-45 STP "PoE (Data+Power)" Output Port: 1 x RJ-45 STP Input power terminal block: 1 LED Indicator: System: Power 1, Power 2, Fault (Green) PoE Port: PoE in Use x 1 (Green) Network Cable: 10Base-T: UTP Cat. 3, 4, 5, up to 100m (328 ft.) 100Base-TX: UTP Cat. 3, 4, 5, up to 100m (328 ft.) 1000Base-T: UTP Cat. 5, 5e, 6 up to 100m (328 ft.) EIA/TIA- 568 100-ohm STP (100m) Data Rate: 10/100/1000Mbps Dimension: 1.26" x 5.31" x 3.46" Weight: 1.05 lbs. Unit Input Voltage: 24 - 48V DC; 24V AC Power Consumption: 30 watts max. Number of device can be powered: 1 Installation: DIN rail kit and wall mount ear Alarm: Provides one relay output for power failure, Alarm relay current carry ability: 3A at DC 30V Enclosure: IP30 slim type metal case Power over Ethernet PoE Standard: IEEE 802.3at High ...
• Model #: IPOE-162

• Type: PoE Injector
• Specifications: Interface: "Data" Input Ports: 16 x RJ45 "Data + Power" Output Ports: 16 x RJ45 Management Port: 1 x RJ45; 10/100/1000BASE-T, auto-negotiation, auto-MDI/MDIX Data Rate: 10/100/1000Mbps LED System: SYS PWR x 1 (Green), PoE Failure x 1 (Red), Fan Failure x 2 (Red) Management port x 2: 1000 (Green), 10/100(Orange) Per PoE Port: Ultra 60W PoE-in-use x 1 (Green), 802.3at/af PoE-in-use x1 (Orange), PoE Power Usage LED x4 (Green) Power Requirements: 100 - 240V AC, 50/60 Hz, 8A Power Consumption: 800 watts (max.) / 2729BTU Ventilation: Fan x 3 Enclosure: Metal PoE Standard: IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus 4-pair Ultra PoE PoE Power Supply Type: End-span / Mid-span / UPoE (Ultra PoE) Power Pin Assignment: Pair 1 end-span: 1/2(-), 3/6(+) Pair 2 mid-span: 4/5(+), 7/8(-) UPoE: 1/2(-), 3/6(+),...
• Model #: UPOE-1600G

• Type: PoE Injector
• Color: White
• Specifications: Hardware Version: 2 Interface: "Data" Out Port:1 x RJ-45 STP "PoE (Power + Data)" Input Port:1 x RJ-45 STP DC Out Plug Connector:1 LED Indicator: System: 1 x PoE in Use (Green) Network Cable: UTP Cat. 5/5e/6, up to 100m (328 ft.) Data Rate: 10/100/1000 Mbps PoE Standard: IEEE 802.3at Gigabit Power over Ethernet / PD PoE Power Input: IEEE 802.3at 52~56V DC DIP Switch: 5V DC / 12V DC output voltage Number of devices that can be powered: 1 Standards Compliance IEEE 802.3 10BASE-T Ethernet: IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus
• Model #: POE-161S

• Brand: TRENDnet
• Part Number: TI-BE200
• Type: PoE Extender
• Specifications: Standards IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3ab IEEE 802.3af IEEE 802.3at IEEE 802.3bt Standard Interface 1 x Gigabit PoE++ in port 1 x Gigabit PoE++ out port 1 x Gigabit PoE+ out port LED indicators Wall mount IP67 housing Data transfer rate Ethernet: 10Mbps (half duplex), 20Mbps (full duplex) Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) Gigabit: 2000Mbps (full duplex) Performance RAM buffer: 1Mb MAC Address Table: 2K entries Jumbo Frame: 9KB Certifications CE FCC IEC 61000-4-2 IEC 61000-4-4 IEC 61000-4-5 IEC 60068-2-27 (Shock) IEC 60068-2-32 (Free Fall) IEC 60068-2-6 (Vibration)
• Model #: TI-BE200

• Model #: S0J42A

• Type: PoE Splitter
• Color: Black
• Specifications: Interface: "PoE (Power + Data)" Input Port : 1 x RJ-45 10/100/1000Base-T "Data" Out Port: 1 x RJ-45 10/100/1000Base-T DC Out Plug Connector: 1 removable 4-Pin terminal block LED Indicator: System: Power Ready x 1 (Green) Network Cable: 10/100/1000Base-T: 4-Pair UTP Cat. 5, 5e, 6 Distance up to 100m (328 ft.) EIA/TIA- 568 100-ohm STP (100m) Data Rate: 10/100/1000 Mbps (vary on Ethernet device attached) DIP Switch: 12V DC / 24V DC output voltage Power Input: 802.3at PoE 48~56V DC Power Output: 12V / 24V DC, max 2A (adjustable) Enclosure: IP30 metal case Installation: DIN rail kit and wall mount ear ESD / EFT Protection: 6 KV DC PoE Standard: IEEE 802.3at High Power over Ethernet Number of devices that can be powered: 1 or 2 (Vary on device's power requirement; DC1 + DC2 cannot be over 25 watts.) ...
• Model #: IPOE-162S

• Part Number: SFP-H10GB-CU3M=
• Type: Cable
• Color: Black
• Specifications: Cable Type: Twinaxial Cable Length: 9.84 ft Connector Type on First End: SFP+ Network Connector Gender on First End: Male Connector on First End Details: 1 x SFP+ Network Connector Type on Second End: SFP+ Network Connector Gender on Second End: Male Connector on Second End Details: 1 x SFP+ Network Conductor: Copper Device Supported: Network Device
• Model #: SFP-H10GB-CU3M=

• Type: Tools and Hardware
• Model #: JW054A

• Model #: CP48BLY

• Parts: 1 Year
• Model #: WG9004

• Type: PoE Injector
• Specifications: Ethernet Interface: Copper: 10/100BASE-TX RJ45, auto-negotiation / auto-MDI / MDI-X Power over Ethernet Standard: IEEE 802.3at/af PoE PD (Powered Device) PoE Input: Supports both mid-span and end-span PSE Input Range: 48~56V DC Data Rate: 100/100 Mbps Cabling: Cat5e or above Maximum Distance: 100m Maximum Frame Size: 1522 bytes LED Indicators: 4 x LEDs PWR LRP LNK PoE IN LNK / ACTESD Protection: 4 KV DC EFT Protection: 2 KV Enclosure Metal: case Installation: Wall mount or DIN rail with optional kit Power Requirements: RJ45 PoE Input: 802.3at/af 48~56V DC DC Input: 48~56V DC Standards Compliance: IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3af Power over Ethernet (802.3at Type 1) IEEE 802.3at Power over Ethernet (802.3at Type 2)
• Model #: LRP-101UH

• Type: Ceilling Bracket
• Specifications: Flush-frame acoustic ceiling bracket for ZoneFlex R710. Flush-frame only - not applicable for standard (recessed-frame) acoustic ceiling. Kit Content: 1 x Mounting bracket 2 x Mounting guide
• Model #: 902-0123-0000

• Model #: JW055A

• Type: PoE Injector
• Color: Black
• Specifications: Interface: LAN: 1 x RJ-45 STP, "Data" Input Port POE: 1 x RJ-45 STP, "Data + Power" Output Port AC Connector: 1 x AC Input power socket, IEC-320 C6 Network Cable: Ultra PoE (60W): 4-pair UTP Cat. 5, 5e, 6 up to 100m (328 ft.) 802.3af / at PoE(15W / 30W): 2-pair UTP Cat. 3, 4, 5, up to 100m (328 ft.) LED Indicator: System: Power x 1 (Green) PoE Port: Active, PoE ready / In Use x 1 (Green) Data Rate: 10/100/1000 Mbps Unit Output Voltage: DC 50-57V, 1.2A Power Requirements: 100-240V AC @ 50/60 Hz, 1.5A max. Power Consumption: 60 watts max. PoE Standard: Ultra PoE over 4-pairs UTP, High Power over Ethernet End-Span / Mid-Span PSE PoE Power Supply Type: End-Span + Mid-Span Power Pin Assignment: Pair 1 End-Span: 1/2 (+), 3/6 (-) Pair 2 Mid-Span: 4/5 (+), 7/8 (-) PoE Power Output: DC 50-57V/60-w...
• Model #: POE-173

• Type: USB
• Ports: 3 x USB 3.0 , 1 x Gigabit Ethernet
• Transfer Rate: 1Gbps
• Weight: 0.7
• Model #: U336-U03-GB

• Type: PoE Injector
• Specifications: Interface: Input Port: 1 x RJ45 STP Data In Output Port: 1 x RJ45 STP PoE (Data + Power) Out Input power terminal block: 1 Network Cable: Twisted-pair cable up to 100 meters (328 ft.) 10BASE-T: 4-pair UTP Cat. 3, 4, 5, 5e, 6 100BASE-TX: 4-pair UTP Cat. 5, 5e, 6 1000BASE-T: 4-pair UTP Cat. 5e, 6 Data Rate: 10/100/1000 Mbps Dimensions: 1.26" x 5.31" x 3.46" Weight: 0.95 lb. Power Requirements: DC 48~56V, 2A max. Unit Output Voltage: DC 45~53V Power Consumption: 75 watts max. Standards Compliance: IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3bt 4-pair Power over Ethernet Type 3 IEEE 802.3at Power over Ethernet Plus IEEE 802.3af Power over Ethernet Package Contents: IPOE-171-60W User's manual Wall-mount kit Dust cap
• Model #: IPOE-171-60W

• Type: PoE Adapter
• Color: Black
• Specifications: Dimensions: 3.43" x 1.73" x 1.14" Weight: 0.20 lb. Rated Voltage: 100-240VAC @ 50/60Hz Input Current: 0.3A @ 120VAC, 0.2A @ 240VAC Inrush Current: <30A Peak @ 120VAC, <60A Peak @ 230VAC Efficiency: 75+% Output Ripple: 1% Max. Switching Frequency: 50 kHz Line Regulation: <= 3% Load Regulation: <= 5% 2-Pair Powering: Pins 4, 5 (+) and Pins
• Features: Provides Earth Grounding and Surge Protection Helps Protect Against ESD Events Powers Ubiquiti PoE Devices
• Model #: POE-24-12W

• Type: Power Supply
• Specifications: Hardware Version: 2 Dimensions: 5.04" x 3.35" x 4.92" Weight: 3.31 lbs. Input Voltage: 100-240V AC, 50/60 Hz, 4.8A Power Output: 480 watts, 48V, 10A Temperature: Operating: -20 ~ 70 degrees C Storage: -40 ~ 85 degrees C Humidity: Operating: 20 ~ 95% Storage: 10 ~ 95% (non-condensing) Installation: DIN rail TS-35/7.5 or 15
• Model #: PWR-480-48

• Type: Power Interconnect Cord
• Model #: CAB-SPWR-150CM

• Type: Cable
• Specifications: Cable Type: SFP+ Cable Length: 9.84 ft. Connector on First End: 1 x SFP+ Network Connector on Second End: 1 x SFP+ Network Data Transfer Rate: 1.25 GB/s Compatibility: Aruba 8320 Switch Series
• Model #: J9283D

• Model #: UACC-DAC-QSFP28-0.5M

• Model #: J9281D

• Type: AC Adapter
• Model #: 01-SSC-0709

• Brand: TRENDnet
• Type: PoE+ Injector
• Color: Black
• Specifications: Standards - IEEE 802.3 - IEEE 802.3u - IEEE 802.3ab - IEEE 802.3af - IEEE 802.3at Device Interface - 4 x Gigabit Data in ports - 4 x Gigabit Data + PoE+ out ports - Metal Housing - Power Switch PoE Budget: Max. 65W Power: - Input: 100 – 240V AC, 50/60 Hz - Output: 55V DC, 1.3A - Max. consumption: 70W Temperature: 0° - 40° C (32° - 104° F) Humidity: Max. 90% non-condensing Certifications - CE - FCC Dimensions : 126.4 x 73.95 x 32mm (5.00" x 2.90" x 1.26") Weight : 322g (11.30 oz.)
• Model #: TPE-147GI

• Model #: SPEARQSW2FOR101

• Model #: WG9023

• Brand: HPE
• Part Number: R9J32A
• Type: Cable
• Color: Black
• Model #: R9J32A