Specifications: Material: Steel
Dimensions: 4.25" Height x 3" Width x 7.50" Depth
Color: Black (also available in white)
Weight Capacity: 500 lbs (227 kg)
Package Contents:
CMA Angled Ceiling Plate
2 x 3/8" Washer
1 x 5/32" Hex Key
1 x Coupler Assembly
1 x (½"-13) Nylock Nut
1 x Cathedral Ceiling Plate
1 x (½"-13 X 4") Hex Head Bolt
1 x (5/16"-18 X 3/8") Set Screw
2 x (3/8"-16 X 5/8") Hex Machine Screw
Specifications: Compatibility: <=24" LCD
Weight Capacity: 5-30 lbs(2.3-13.6 kg)
Lift: 9"(22.9 cm)
Tilt: 10°
VESA: MIS-D
Additional Information:
Negative-tilt keyboard tray is adjustable 0° to -10°
Maximum Monitor Weight = 25 lbs (11.3 kg)
Monitor thickness greater than 3" (7.6 cm) may decrease capacity
Integrated Cable Management System can be Configured on Either Side
Mounting Standards: VESA FDMI MIS-D, 100/75 (hole pattern: 100 x 100 mm & 75 x 75 mm)
Package Contents:
StyleView 60-593-195 Vertical Mount Lift
Mouse Pad
Wrist Rest
Mouse Pouch
Specifications: Mounting Options: Attach through worksurface hole 3/8" to 3" (10 to 76 mm) wide and up to 3-1/4" (82 mm) thick. For maximum support, screw should be centered through hole
Works with DS100 Quad-Monitor Desk Stand
Specifications: Weight Capacity: 6–16 lbs (2.7–7.2 kg) for display; total stand capacity = 37 lbs (16.7 kg) for combined weight of display, CPU, keyboard and mouse
Motion may be restricted when using 22"–24" monitors in portrait mode
Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
Five-inch (13 cm) height adjustment ergonomically accommodates average range of users
Meets tip test requirements of UL Specification 1678 + Removal of lock screw allows portrait to landscape rotation (90°)
Compatible with most 15"–24" displays, and most small or ultra small form factor CPUs.
Maximum CPU size = 15"W x 14"H x 4.5"D (38 x 35.6 x 11.4 cm); minimum CPU size = 7"W x 7"H x 2"D (18 x 18 x 5.1 cm). Provided rubber spacer must be used to accommodate CPU depths of less than 3" (7.6 cm)
Moun...
Specifications: Weight Capacity: 23 lbs
LCD Size: 24"
Tilt: 180º
Pan: 180º
Rotation: 360º
Monitor depth greater than 3" (7.5 cm) may diminish capacity
Mounting Options: Mounts to sturdy vertical surfaces. Where applicable, attach to wood stud. To increase support, a separately-ordered Wall Plate or Wall Track accessory is recommended
Mounting Standards: VESA FDMI, MIS-D, 75/100, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
Shipping Weight: 3 lbs (1.4 kg)
Specifications: Works with a wide variety of power strips and surge protectors
Secures the power strip firmly against the cart’s center column to minimize the strip’s profile and space usage
Keeps cords organized
Strong, steel construction
Simple installation
Specifications: Complies with UL Tip Standards 1667 and 1678
Rugged plastic-composite shelf conveniently attaches to cart at any height
Modular cable channel system is adaptable for various wiring configurations
Add the MMC Camera Shelf Kit to place adjustable camera shelf above the display (ordered separately); shelf is not compatible with the NF MMC LD, 24-190-057, when using the optional small LCD monitor pivot (includes 75 mm and 100 mm mounting holes), which is typically used with 25 lbs (11. 4 kg) to 36 lbs (16.3 kg) displays. As an alternative, the NF WideView cart, 24-189-055, does accommodate this size monitor and a camera shelf
CPUs attach safely to rear of cart with Universal CPU Holder accessory (ordered separately). Compatible with CPU sizes from 12" H x 3" D to 18" H x 8.5" D (300 x 80 mm to 460 x 220 mm)...
Specifications: # of Displays Supported: 1
Articulating: No
Cable Management: Yes
Mounting Options: Wall-Mount
VESA Hole Pattern(s): 75x75 mm / 100x100 mm
Display Pan: +180° / -180°
Display Rotation: 360°
Display Tilt: +90° / -15°
Height Adjustment: No
Maximum Arm Extension: 20.5 in [520 mm]
Maximum Display Size: 30in
Minimum Display Size: 13"
Weight Capacity (Per Display): 30.9 lb [14 kg]
Swivel / Pivot:
+180°/-180° at the wall
360° at the shoulder
360° at the elbow
Included in Package:
1 x Wall Mount
2 x Swivel Arms
1 x Monitor Mount
4 x Thumb Screws
1 x M3 Hex Key
2 x Wall Plugs
2 x Mounting Screws
1 x User Manual
Specifications: Wallmountable: No
Tools Included: Yes
Articulating: Yes
# of Displays Supported: 1
Mounting Options: Desk Clamp
VESA Hole Pattern(s):
75 x 75 mm
100 x 100 mm
Mounting Surface Thickness: Desk Clamp: Maximum Table Thickness of 85mm (3.3 in)
Maximum Arm Extension: 22.4 in
Laptop Arm Extension: 22.4 in
Display Tilt: -85° / +90°
Laptop Tray Tilt: 90° tilt from horizontal to vertical
Swivel / Pivot: -180° / +180°
Display Rotation: 360°
Specifications: Includes Includes: 10" and 34" Wall Tracks with two black track covers, LX Wall Mount LCD Arm, LX Keyboard Arm, wrist rest, mouse pad, mouse holder, Small CPU Holder, two 10" Cable Channels, mounting kits for hollow-wall and wall-stud installation
Quality Tested: 10,000-cycle test applied to lift mechanism, ensuring years of trouble-free height adjustment
Polished aluminum construction offers greater durability and enhanced aesthetics
Snap-fit cap secures interface of arms to extensions for greater stability
Weight Capacity: display = 7-25 lbs (3.2-11.3 kg); keyboard = 5 lbs (2.2 kg); CPU = 50 lbs (22 kg). With monitors greater than 20 lbs (9.1 kg) in weight, the vertical range of motion may be reduced up to 4.5" (11 cm) for a total height range of 8.5" (22 cm)
Mounting Standards: VESA FDMI MIS...
Specifications: Description: Interface Bracket Kit (aluminum); aka T-Slot Bracket Kit
Includes: (1) Angled T-Slot Interface Bracket, (2) Light-Duty T-Slot Brackets, mounting hardware, manual
Light-Duty Brackets can be used with most Ergotron carts; Angled Interface Bracket can be used with Neo-Flex Mobile WorkSpace Carts, Mobile MediaCenters, StyleView 31/32 Carts and WorkFit C-Mod Workstations
Install either the Angled Interface Bracket or the Light-Duty Brackets; to deploy both types of brackets on a cart requires two kits
Consideration should be given to weight of component being mounted relative to its height on cart to avoid tip hazard
Specifications: Includes (6) Phillips oval head CR, ST6.3 x 2.5 - 50 mm (2") screws and (6) Phillips oval head self-tapping CR, ST6.3 x 1.8 - 50 mm (2") screws