Specifications: Interfaces
IR/Serial 6 x Programmable IR / Uni-directional RS-232 Port
6 x 2-Pole Terminal Block Connector
IR: TTL level (0 to 5 V)
Carrier Frequency: 10 - 455 KHz;
Serial: Uni-directional RS-232 ( + - 5 V)
Baud Rate: 300 to 115200 (default: 9600);
Data Bit: 8 (default) or 7;
Stop Bit: 1 (default) or 2;
Parity: None (default), Even or Odd
Ethernet
1 x RJ-45 Female, 10/100Base-T
Supported Protocol: ICMP, TCP/IP, DHCP, HTTPS, SSH
DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds:
IP: 192.168.0.60
Subnet Mask: 255.255.255.0
Switches
Controller ID: 1 x 16-segment Switch
Expander ID: 1 x 8-segment Switch
Reset Button: 1 x Semi-recessed Pushbutton
USB: 1 x USB Type A (Firmware upgrade only)
Power: Consumption 5VDC, 8W(adapter); 48V, 10.5W (PoE, PoE 802.3 AF/AT compatibility)...
Operating Systems Supported: Windows
Intel i3 or AMD equivalent processor
Intel, AMD or 100% compatible motherboard
Microsoft Windows 11, Windows 10 32/64 bit ver 21H1 or later
> 4GB RAM
> 4GB of free hard disk space
Available USB-C port (USB 2.0)
PC must meet the minimum hardware requirements to operate on the Windows OS installed
Macintosh
Macintosh running MacOS 10.15 or higher
> 4GB RAM
> 4GB of free hard disk space
Available USB-C port (USB 2.0)
Mobile Device
Android 13.0 or later
iOS 15 or later
Available USB-C port (USB 2.0)
Device must capable of output audio through its USB-C port
PS4
Firmware Ver 5.0 or later
Available USB-A port ^ (USB 2.0)
PS5
Firmware Version 20.02-2.26.00.00-00.00.00.0.1 or later
Available USB-C port
Available HDMI ARC port via TV
Xbox Series X/S...