Specifications: Interface:
"Data" Input Port: 1 x RJ45 STP
"PoE (Data + Power) Output Port: 1 x RJ45 STP
AC Input Power Socket: 1
LED Indicator:
System: Power x 1 (Green)
PoE Port: Active, PoE ready-in-use x 1 (Green)
Network Cable:
10BASE-T: 2-pair UTP Cat. 3, 4, 5, up to 100m (328 ft.)
100BASE-TX: 2-pair UTP Cat. 3, 4, 5, up to 100m (328 ft.)
EIA/TIA-568 100-ohm STP (100m)
Data Rate: 10/100 Mbps
Unit Output Voltage: DC 53V, 0.6A
Power Requirements: 100-240V AC, 50/60 Hz, 0.75A
Power Consumption: 30 watts (max.)
Number of Devices that can be powered: 1
PoE Standard: IEEE 802.3at Power over Ethernet Plus / PSE
PoE Power Output: DC 53V / 30 watts
PoE Power Supply Type: Mid-span
Power Pin Assignment: 4/5 (+), 7/8 (-)
Standards Compliance:
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE ...
Standards: IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX / 100BASE-FX
IEEE 802.3z Gigabit SX / LX
IEEE 802.3ab Gigabit 1000BASE-T
IEEE 802.3x Flow Control and Back pressure
IEEE 802.3ad Port Trunk with LACP
IEEE 802.1D Spanning Tree protocol
IEEE 802.1w Rapid Spanning Tree protocol
IEEE 802.1s Multiple Spanning Tree protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN Tagging
IEEE 802.1x Port Authentication Network Control
IEEE 802.1ab LLDP
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP version 1
RFC 2236 IGMP version 2
RFC 3376 IGMP version 3
Primary Ports: 16 x 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE 802.3at PoE+ Injector
2 x 100/1000BASE-X mini-GBIC/SFP slots
1 x RJ45 console interface for switch basic management and setup