Specification: Switches MOUNTAIN Tactile 55
Keycaps ABS
MCU Cortex M0
Interface USB 2.0
Materials Aluminum plate, ABS keycaps & cover, rubber pad
Number of Profiles 5
Switch support 3-pin & 5-pin Cherry MX-style
Polling Rate 1000Hz/1ms
Connector USB Type-C
Cable Length 2m
Software Support Base Camp™ (Windows only)
Included Accessories
Stand w/ Rubber Pad
Keycap/Switch removal tool
2m USB Type-C to USB Type-A Cable
Quick Start Guide
Feature: Connects multiple SKAARHOJ Tally Lamps using CAT5e or better cable. Lamps can be connected in a star-topology (every lamp connects to ETH-TALLY Link) or you can daisy chain up to three lamps on a single wire. ETH-TALLY Link is fully UniSketch capable so you can create tally for any device core you wish - like ATEM Switchers, vMix etc.
Feature: Strong and sturdy mountable hot shoe adapter in metal with locking washer. Ready to take a beating for a life on the road.
Two switches are integrated on the Tally Light:
Switch 1: On/off main LED (red)
Switch 2: Dimmed on/off operator LED (red + green)
The main LED (red) provides a large, clear and bright light easy visible for the presenter to know which camera is on program. The LED can be turned on/off with a switch on the tally light.
The operator LED shines red when on program and green when on preview. With the swich on the tally light the operator LED can be dimmed when used in very low light conditions to avoid blinding the camera operator.
Power Supply: Connects to a computer by a single USB cable. No additional power is required.
Specification: Main controls:
12 buttons
1 trackerball (can double as jog / shuttle)
1 ring
Secondary controls:
1 trackerball reset button
1 ring reset button
2 buttons to program Shift and ALT and similar functions into
Standard transport buttons
Feature: Features 1 trackerball, 1 ring, and 12 buttons, all programmable
Additionally features standard transport buttons and 2 reset buttons
2 buttons are available to program Shift, ALT and similar functions into
The ball and ring work by laser pickup that ensures precision and long life
The ring also has smooth bearing, and the buttons work by tactile response
Compatible with Tangent's HUB service for a customized layout of the controls...
Feature: GPIO Control Made Easy
Setting up an I/O device have never been this flexible. Connect and control anything from your tally lamps, trigger ATEM switcher routines, control a HyperDeck, change Scopes on a SmartScope Duo and route inputs/outputs on a VideoHub. Defining parameters - single or multiple - for inputs/outputs is extremely fast, thanks to the drop-down menu structure in the web interface. Connect and control up to 8 devices at the same time!
- 1 x DB25 Connector Configuration
- 8 GPO
- 8 GPI
- UniSketch web interface for extensive configuration