BEST SELLERS

In Fans & PC Cooling

Never seen lower cpu temps.

Low cost cooling.$40 aio seems to be working good.

set up was easy and instructions made sense. CPU temps as expected so far.

- Quiet - Inexpensive - Works

Works as it should.

Enough thermal grease for two installations (From experience) Comes with all the brackets you need Decent instructions for a beginner like me Looks great in my blackout case Moves heat out of the case very well, I've never had my i7-9700 over 60 degrees or so. Seems to run quieter than my case fans

Why did I pick this? I was intrigued by this so I bought it. Sure, its pricier than most pastes. There is a thick plastic side and a thin plastic side. I cut the piece to size and used a sharp utility knife to pre-peal the thin plastic side and fold the corner. I wiped the die with the enclosed alcohol pad, pealed the thick plastic side, centered the pad, used the spatula to press it down and then grabbed the pre-folded edge of the thin plastic to remove. It wasnt too bad. I dont know if it works better as I have not compared it to regular thermal paste but I am satisfied that I got an appropriate amount between the CPU and the cooler.

-easy, clean install -look great -removing one fan from the pack was simple

Good cooling and screen is big and crisp along with the light ring

4 mounting screws are provided. They are black in color.

I had read comments that the fan came damaged - mine was in perfect condition. It arrived early even though it came from overseas. Super quiet too :) Took me some time to find a fan to fit my motherboard as I'm not very techy, so quite happy i have my pc back in working order :D

Best looking fans in my opinion, the l connect 3 was easy to understand ive had 0 problems with the fans or software

Great cooling, at idle it is keeping my 9950X3D around 36 - 38 C and gaming it keeps it in the 70's. It is very quite and for a pump that is running at over 5000 rpm it does not make alot of sound. The water line from the radiator to the pump head is shorter, but it is a 280mm and with the good range of flex it has at the pump it works great for most installs.

working well. 3 are on my deepcool liquid cooling system 360 mm radiator and 2 in the zalman z9 from around 2013, i5-11600k cpu with 12 mechinacal hard drive ranging in capacity from 10 tb to 16 tb and a samsung 990 evo ssd and 128 gig of corsait vengance 3600 ddr4 ram and evga 860 watt power supply with a 16 port sata controller. temps are around 111 degrees f. (43.9 c). very quiet and nice black controller with built in magnets. Request: more modes and patterns please.

budget and efficient for my i5 13400

Before I even installed it, I was already impressed by the parts and pieces. The fans easily attach and detach from the cooling unit if you don't want both and can be installed elsewhere, and they include a tube of their own brand of decent thermal paste as well. The thank-you letter, metal pin-style case sticker, and noise reduction/Y cables make for an 'above and beyond' level of quality for an already high-quality product. Even the long screwdriver was of higher quality than the stuff that usually ships with this sort of thing. The product itself performs in line with the praise surrounding the Noctua brand, and you won't be disappointed. Even when under maximum sustained load, the noise is minimal and temperatures are good.

- These are absolutely beautiful. - They have clips that go on the front of the fans once they're installed that hide the seams between the fans and the screw holes. That kind of attention to detail is what I like - The noise isn't bad unless you have them at 100% (not necessary imo) - The fact that they come in reverse airflow and regular is really cool. The bottom and side fans are intake fans but you can still see the front of them. Nearly all other fans on the market don't have reverse airflow so you have to flip them and see them from the back for them to be intake fans. I'm not a fan of that.

Seems to push air well PWM, so variable speed. Quiet when turned down but still seem to push air well. At lowest PWM settings can fully turn off in case you wanted a hold where the fans only spun when necessary. Can daisy chain, so the fans can plug into each other so that they only use up one mobo fan port