BEST SELLERS

In Motherboard

Straightforward easy to put in, lots of space for upgrading

- Good wifi reception even if you don't plug in the antennas - BIOS UI is pleasant to use and offers good control over fan curves - Good linux compatibility - Relatively cheap for having the latest-gen tech

Just finished this build, and I was amazed how everything worked so well at 1st power up. I want to give a shout out to Jayz2cents for his, What to do after the build video. One thing I learned is updating the bios, I did not have to have a 32gb or less USB with fat32 formatting, the new ones can handle exfat, I used a 128gb USB and also downloaded the latest Bios update from the Asus Page, with my 10yr old, and first build, Win10 Desktop, then installed on my new Win11 build, which did not have Windows Op system installed yet. I checked with Asus first because I read several reviews that claimed they had problems with 14Gen CPU's. They had me check my mobo last 4 digits on barcode, I believe, were which bios it had onboard from factory, which were 1658 on mine. Asus said, that would handle 14th Gen, the newest as of right now is 1820. Any way Thanks to Asus and Jayz2cents, power up had no hiccups.

-Zero issues after one month -No BIOS update needed for Ryzen 5600X (I had version F13) -Great value. B550 has PCIE 4.0 at a low price.

Works with and USES ECC memory, as confirmed in Ubuntu 24.04 (Kingston KSM48E40BD8KI-32HA). I didn't have to fiddle with the bios at all - either to get full performance in Passmark versus existing baselines, or to get ECC memory to be recognized and to work in Linux. This was great, as I "upgraded" early from my (not old) Gigabyte B760M with the borked 13900K.

Product arrived quickly and was fairly straightforward to install into my computer. A friend bought the same motherboard and had to q-flash it in order for it to work, so we did that with mine too, but I don't know if it was necessary for mine. No issues after q-flashing. Works great in my computer

Supports 5000 ryzen out of the box. ECC udimm support 2.5gbe onboard Good iommu support Pcie x 16 slot has x8 x4 x4 mode for bifurcation risers Boots fine headless Decent pcie and m2 connectivity off the chipset Big vrm heatsink Cheap and cheerful White pcb is well done and attractive

Affordable price Excellent workmanship Stable and easy-to-use BIOS

-went in easy with the built in i/o shield. -Plenty of fan headers, good connectivity. -Good basic board, if it lasts half as long as my last gigabyte board, (12 years) I'll be very pleased.

Cheaper than the competition Blacked out aesthetic Worked perfectly out of the box No RGB

-I upgraded my motherboard because I specifically wanted one thing: the USB-C header. Now I can actually use my PC's front USB-C port! -They added 2.5 Gigabit Ethernet. I don't think this was in any of the previous gen mini-ITX boards, and it's somewhat uncommon even in bigger boards where 1 Gigabit is still the norm. In addition, they added WiFi 6! You will get great Internet connectivity with this board regardless of your situation. -I like how they added a second M.2 slot and a fan over one of the M.2 slots. The previous gen only had one M.2 slot and no fan. The fan doesn't make noticeable noise, and the BIOS has fan curve presets that make it easy to adjust the fan speed if desired. -They added a BIOS Flash button and a Clear CMOS button to the back panel. You can use the BIOS Flash button to upgrade the BIOS without even having a CPU or RAM installed, allowing you to flash the latest BIOS to add support for the newest CPUs. This eliminates the problem of having to install an old-gen CPU to add support for a new-gen CPU. The Clear CMOS button makes it easy to troubleshoot, by eliminating BIOS settings as a possible cause of whatever problem you are troubleshooting. -There are troubleshooting LEDs on the board that light up during the boot process; it's normal for them to turn on but if it gets "stuck" on one of these lights, that gives you a general idea of what might be causing a problem. This can save you so much time identifying problems like improperly seated RAM or bad GPU. -I love that the design is "serious", meaning there are no RGB lights or gaudy designs on the board. This is what a motherboard should be: a blank slate upon which you can build. You want RGB? Add it yourself! That's how it should be, and that's how it is.

7600mhz XMP working beautifully right out of the box. I am coming from the exact same mobo but Z490 10th gen. The old mobo had a sad I/O plate but this new rig is fully integrated and comparing the two makes me laugh, the old one looks so cheap. The wifi and Bluetooth are excellent, reaching across a big room to my DualShock controllers.

-Easy to upgrade firmware -No issues from first boot -Read my DDR4 3200 sticks with no issue -Running a 5800X3D with no problems -Looks clean

I love that the included a GPU release latch that is properly placed.

Was waiting for a z790 board and managed to grab this one since nearly everything is sold out. I just finished building a new system and didn't want to wait until Jan because nearly everything is backordered.

It's a decent quality AM5 motherboard, with plenty of connectivity for everything I needed.

-Excellent VRMs for price -Aesthetically pleasing w/ plenty of ARGB headers -Robust IO -Easy to build in -Intuitive AI OC features

VRM Memory Capacity PCIE 5 Easy to install

-beautiful board -plenty of high speed connections (TB5, TB4, 10G LAN, etc)