BEST SELLERS

In Thermal Compound / Grease

Most processors come with some cheapy goop that isn't as closely conductive as arctic silver 5. You wouldn't think just a small bit of compound could lower your CPU temp around 5 C (10F) which could make or break your processor if things get too hot. It also gives you a little room for overclocking. My bro had a PC that got fried because the OEM goop that came with his processor heatsink turned into styrofoam.

Plenty in the tube.Good syringe quality, size and shape for keeping with computer tools.

I liked that this product came with cleaning towelettes to clean the prior thermal paste off.

very efficient staff, cools as it must.

great stuff.

Great product. I did some testing between 3 different paste. Cpu ryzen 5800x Aio corsair 240 platinum se white Ram corsair dominator platinum Mobo asrock x570 taichi razer edition Gpu amd 6700 xt Psu corsair cx750m v2017 Case lian li 011 dynamic I'm using 9 fans 3 ll120 on top ,3 ll120 on side and 3 ql 120 on bottom all corsair fans. Gelid extreme idle 44c under load 78c Kingpin idle 42c under load 74c Thermal grizzly 38c under load 68c Room temp 65f Stock clock speed with a +200 pbo locked voltage of 1.29 I love this product and will continue to use as my main paste

None at time of purchase.

-Keeps my 5800X3D well within operating temperatures while gaming -Easy to apply to the CPU, just cool it down in the fridge before trying to peel off the plastic -Great for builds intended for long-term use

Dropped my wife's temperature on her 9900k by 3-4°C. She was idling at 35-36°C with stock paste on her NZXT Kraken X63. Now 31-32°C after NT-H2 application. Haven't checked what loaded temps look like yet. I have her locked down at 4.8GHz on all cores at the moment. I want to OC her to 5GHz and benchmark to compare with my 9900k system that will also have some Noctua paste applied to replace my Deepcool Castle 360EX stock paste. I will update after benchmarks are complete.

-Great performance. My CPU temp is around 28C at idle and caps out at 63C under sustained stress testing =O. Using a Cooler Master Hyper 212 cooling tower. Maybe I went overboard because the Ryzen 5 5500GT isn't the spiciest processor out there... but I can't say I regret it. -Included plastic spatulas and cleaning wipes were very helpful. Mixed results with the applicator tip.

Awesome Thermal Conductivity & lower temps, easy application

good price, does it job, good thermal conductivity, will buy again.

Why did I pick this? I was intrigued by this so I bought it. Sure, its pricier than most pastes. There is a thick plastic side and a thin plastic side. I cut the piece to size and used a sharp utility knife to pre-peal the thin plastic side and fold the corner. I wiped the die with the enclosed alcohol pad, pealed the thick plastic side, centered the pad, used the spatula to press it down and then grabbed the pre-folded edge of the thin plastic to remove. It wasnt too bad. I dont know if it works better as I have not compared it to regular thermal paste but I am satisfied that I got an appropriate amount between the CPU and the cooler.

Review said that it was pretty good for mid to low high temps. Not as good for high temps but I don't intend to go there.

Exactly what i needed.

Used with a Ryzen 7 9700x and EK AIO. - Precut to AM5 size so: a quick dot of included silicon lube for super easy placement a quick tighten of the air and I was done - Consistently 2 to 5 C cooler at idle than my last 2 paste jobs - Consistently 5 to 10 C cooler under load

Inexpensive. Does the job.